Add support for DMA controller of BCM2835 as used in the Raspberry Pi. Currently it only supports cyclic DMA for serving the I2S driver. Signed-off-by: Florian Meier <florian.meier@xxxxxxxx> --- arch/arm/boot/dts/bcm2835.dtsi | 22 + drivers/dma/Kconfig | 6 + drivers/dma/Makefile | 1 + drivers/dma/bcm2835-dma.c | 880 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 909 insertions(+) create mode 100644 drivers/dma/bcm2835-dma.c diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 1e12aef..1514198 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -103,6 +103,28 @@ clocks = <&clk_mmc>; status = "disabled"; }; + + dma: dma@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xf00>; + interrupts = <1 16 + 1 17 + 1 18 + 1 19 + 1 20 + 1 21 + 1 22 + 1 23 + 1 24 + 1 25 + 1 26 + 1 27 + 1 28>; + + #dma-cells = <1>; + dma-channels = <15>; /* DMA channel 15 is not handled yet */ + dma-requests = <32>; + }; }; clocks { diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index f238cfd..f2d253b 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -288,6 +288,12 @@ config DMA_OMAP select DMA_ENGINE select DMA_VIRTUAL_CHANNELS +config DMA_BCM2835 + tristate "BCM2835 DMA engine support" + depends on (ARCH_BCM2835 || MACH_BCM2708) + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + config TI_CPPI41 tristate "AM33xx CPPI41 DMA support" depends on ARCH_OMAP diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index db89035..6348157 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o obj-$(CONFIG_DMA_OMAP) += omap-dma.o +obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o obj-$(CONFIG_TI_CPPI41) += cppi41.o diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c new file mode 100644 index 0000000..c3e53b3 --- /dev/null +++ b/drivers/dma/bcm2835-dma.c @@ -0,0 +1,880 @@ +/* + * BCM2835 DMA engine support + * + * This driver only supports cyclic DMA transfers + * as needed for the I2S module. + * + * Author: Florian Meier, <florian.meier@xxxxxxxx> + * Copyright 2013 + * + * based on + * OMAP DMAengine support by Russell King + * + * BCM2708 DMA Driver + * Copyright (C) 2010 Broadcom + * + * Raspberry Pi PCM I2S ALSA Driver + * Copyright (c) by Phil Poole 2013 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_dma.h> + +#include "virt-dma.h" + +struct bcm2835_dmadev { + struct dma_device ddev; + spinlock_t lock; + struct tasklet_struct task; + struct list_head pending; + uint32_t chans_available; + void __iomem *dma_base; + int *dma_irq_numbers; +}; + +struct bcm2835_dma_cb { + unsigned long info; + unsigned long src; + unsigned long dst; + unsigned long length; + unsigned long stride; + unsigned long next; + unsigned long pad[2]; +}; + +struct bcm2835_chan { + struct virt_dma_chan vc; + struct list_head node; + + struct dma_slave_config cfg; + unsigned dma_sig; + bool cyclic; + + int dma_ch; + struct bcm2835_desc *desc; + unsigned sgidx; + + void __iomem *dma_chan_base; + int dma_irq_number; + struct irqaction dma_irq_handler; +}; + +struct bcm2835_sg { + dma_addr_t addr; + uint32_t en; /* number of elements (24-bit) */ + uint32_t fn; /* number of frames (16-bit) */ +}; + +struct bcm2835_desc { + struct virt_dma_desc vd; + enum dma_transfer_direction dir; + dma_addr_t dev_addr; + + uint8_t es; + unsigned int sync_type; + unsigned int sync_dreq; + + unsigned int control_block_size; + struct bcm2835_dma_cb *control_block_base; + dma_addr_t control_block_base_phys; + + unsigned sglen; + struct bcm2835_sg sg[0]; +}; + +#define BCM2835_DMA_CS 0x00 +#define BCM2835_DMA_ADDR 0x04 +#define BCM2835_DMA_SOURCE_AD 0x0c +#define BCM2835_DMA_DEST_AD 0x10 +#define BCM2835_DMA_NEXTCB 0x1C + +/* DMA CS Control and Status bits */ +#define BCM2835_DMA_ACTIVE (1 << 0) +#define BCM2835_DMA_INT (1 << 2) +#define BCM2835_DMA_ISPAUSED (1 << 4) /* Pause requested or not active */ +#define BCM2835_DMA_ISHELD (1 << 5) /* Is held by DREQ flow control */ +#define BCM2835_DMA_ERR (1 << 8) +#define BCM2835_DMA_ABORT (1 << 30) /* stop current CB, go to next, WO */ +#define BCM2835_DMA_RESET (1 << 31) /* WO, self clearing */ + +#define BCM2835_DMA_INT_EN (1 << 0) +#define BCM2835_DMA_D_INC (1 << 4) +#define BCM2835_DMA_D_DREQ (1 << 6) +#define BCM2835_DMA_S_INC (1 << 8) +#define BCM2835_DMA_S_DREQ (1 << 6) + +#define BCM2835_DMA_PER_MAP(x) ((x) << 16) + +#define BCM2835_DMA_DATA_TYPE_S8 1 +#define BCM2835_DMA_DATA_TYPE_S16 2 +#define BCM2835_DMA_DATA_TYPE_S32 4 +#define BCM2835_DMA_DATA_TYPE_S128 16 + +#define BCM2835_DMA_CHANNEL_MASK 32565 + +/* valid only for channels 0 - 14, 15 has its own base address */ +#define BCM2835_DMA_CHAN(n) ((n)<<8) /* base address */ +#define BCM2835_DMA_CHANIO(dma_base, n) ((dma_base)+BCM2835_DMA_CHAN(n)) + +static const unsigned es_bytes[] = { + [BCM2835_DMA_DATA_TYPE_S8] = 1, + [BCM2835_DMA_DATA_TYPE_S16] = 2, + [BCM2835_DMA_DATA_TYPE_S32] = 4, + [BCM2835_DMA_DATA_TYPE_S128] = 16 +}; + +static inline struct bcm2835_dmadev *to_bcm2835_dma_dev(struct dma_device *d) +{ + return container_of(d, struct bcm2835_dmadev, ddev); +} + +static inline struct bcm2835_chan *to_bcm2835_dma_chan(struct dma_chan *c) +{ + return container_of(c, struct bcm2835_chan, vc.chan); +} + +static inline struct bcm2835_desc *to_bcm2835_dma_desc( + struct dma_async_tx_descriptor *t) +{ + return container_of(t, struct bcm2835_desc, vd.tx); +} + +static bool bcm2835_dma_filter_fn(struct dma_chan *chan, void *param) +{ + return true; +} + +static struct of_dma_filter_info bcm2835_dma_info = { + .filter_fn = bcm2835_dma_filter_fn, +}; + +static void bcm2835_dma_desc_free(struct virt_dma_desc *vd) +{ + struct bcm2835_desc *desc = container_of(vd, struct bcm2835_desc, vd); + dma_free_coherent(desc->vd.tx.chan->device->dev, + desc->control_block_size, + desc->control_block_base, + desc->control_block_base_phys); + kfree(desc); +} + +static void bcm2835_dma_start(void __iomem *dma_chan_base, + dma_addr_t control_block) +{ + dsb(); /* ARM data synchronization (push) operation */ + + writel(control_block, dma_chan_base+BCM2835_DMA_ADDR); + writel(BCM2835_DMA_ACTIVE, dma_chan_base+BCM2835_DMA_CS); +} + +static int bcm2835_dma_abort(void __iomem *dma_chan_base) +{ + unsigned long int cs; + int rc = 0; + + cs = readl(dma_chan_base + BCM2835_DMA_CS); + + if (BCM2835_DMA_ACTIVE & cs) { + long int timeout = 10000; + + /* write 0 to the active bit - pause the DMA */ + writel(0, dma_chan_base + BCM2835_DMA_CS); + + /* wait for any current AXI transfer to complete */ + while (0 != (cs & BCM2835_DMA_ISPAUSED) && --timeout >= 0) + cs = readl(dma_chan_base + BCM2835_DMA_CS); + + if (0 != (cs & BCM2835_DMA_ISPAUSED)) { + /* we'll un-pause when we set of our next DMA */ + rc = -ETIMEDOUT; + + } else if (BCM2835_DMA_ACTIVE & cs) { + /* terminate the control block chain */ + writel(0, dma_chan_base + BCM2835_DMA_NEXTCB); + + /* abort the whole DMA */ + writel(BCM2835_DMA_ABORT | BCM2835_DMA_ACTIVE, + dma_chan_base + BCM2835_DMA_CS); + } + } + + return rc; +} + +static void bcm2835_dma_start_sg(struct bcm2835_chan *c, struct bcm2835_desc *d, + unsigned idx) +{ + struct bcm2835_sg *sg = d->sg + idx; + int frame; + int frames = sg->fn; + + /* + * Iterate over all frames and create a control block + * for each frame and link them together. + */ + for (frame = 0; frame < frames; frame++) { + struct bcm2835_dma_cb *control_block = + &d->control_block_base[frame]; + + /* Setup adresses */ + if (d->dir == DMA_DEV_TO_MEM) { + control_block->info = BCM2835_DMA_D_INC; + control_block->src = d->dev_addr; + control_block->dst = sg->addr+frame*sg->en; + } else { + control_block->info = BCM2835_DMA_S_INC; + control_block->src = sg->addr+frame*sg->en; + control_block->dst = d->dev_addr; + } + + /* Enable interrupt */ + control_block->info |= BCM2835_DMA_INT_EN; + + /* Setup synchronization */ + if (d->sync_type != 0) + control_block->info |= d->sync_type; + + /* Setup DREQ channel */ + if (d->sync_dreq != 0) + control_block->info |= + BCM2835_DMA_PER_MAP(d->sync_dreq); + + /* Length of a frame */ + control_block->length = sg->en; + + /* + * Next block is the next frame. + * This DMA engine driver currently only supports cyclic DMA. + * Therefore, wrap around at number of frames. + */ + control_block->next = d->control_block_base_phys + + sizeof(struct bcm2835_dma_cb)*((frame+1)%(frames)); + + /* The following fields are not used here */ + control_block->stride = 0; + control_block->pad[0] = 0; + control_block->pad[1] = 0; + } + + /* Start the DMA transfer */ + bcm2835_dma_start(c->dma_chan_base, d->control_block_base_phys); +} + +static void bcm2835_dma_start_desc(struct bcm2835_chan *c) +{ + struct virt_dma_desc *vd = vchan_next_desc(&c->vc); + struct bcm2835_desc *d; + + if (!vd) { + c->desc = NULL; + return; + } + + list_del(&vd->node); + + c->desc = d = to_bcm2835_dma_desc(&vd->tx); + c->sgidx = 0; + + bcm2835_dma_start_sg(c, d, 0); +} + +static irqreturn_t bcm2835_dma_callback(int irq, void *data) +{ + struct bcm2835_chan *c = data; + struct bcm2835_desc *d; + unsigned long flags; + + spin_lock_irqsave(&c->vc.lock, flags); + + /* acknowledge interrupt */ + writel(BCM2835_DMA_INT, c->dma_chan_base + BCM2835_DMA_CS); + + d = c->desc; + + if (d) { + if (!c->cyclic) { + if (++c->sgidx < d->sglen) { + bcm2835_dma_start_sg(c, d, c->sgidx); + } else { + bcm2835_dma_start_desc(c); + vchan_cookie_complete(&d->vd); + } + } else { + vchan_cyclic_callback(&d->vd); + } + } + + /* keep the DMA engine running */ + dsb(); /* ARM synchronization barrier */ + writel(BCM2835_DMA_ACTIVE, c->dma_chan_base + BCM2835_DMA_CS); + + spin_unlock_irqrestore(&c->vc.lock, flags); + + return IRQ_HANDLED; +} + +/* + * This callback schedules all pending channels. We could be more + * clever here by postponing allocation of the real DMA channels to + * this point, and freeing them when our virtual channel becomes idle. + * + * We would then need to deal with 'all channels in-use' + */ +static void bcm2835_dma_sched(unsigned long data) +{ + struct bcm2835_dmadev *d = (struct bcm2835_dmadev *)data; + LIST_HEAD(head); + + spin_lock_irq(&d->lock); + list_splice_tail_init(&d->pending, &head); + spin_unlock_irq(&d->lock); + + while (!list_empty(&head)) { + struct bcm2835_chan *c = list_first_entry(&head, + struct bcm2835_chan, node); + + spin_lock_irq(&c->vc.lock); + list_del_init(&c->node); + bcm2835_dma_start_desc(c); + spin_unlock_irq(&c->vc.lock); + } +} + +static int bcm2835_dma_alloc_chan_resources(struct dma_chan *chan) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + int ret; + struct bcm2835_dmadev *d = to_bcm2835_dma_dev(chan->device); + uint32_t chans = d->chans_available; + int chanID = 0; + + dev_dbg(c->vc.chan.device->dev, + "allocating channel for %u\n", c->dma_sig); + + /* do not use the FIQ and BULK channels */ + chans &= ~0xD; + + if (chans) { + /* return the ordinal of the first channel in the bitmap */ + while (chans != 0 && (chans & 1) == 0) { + chans >>= 1; + chanID++; + } + + /* claim the channel */ + d->chans_available &= ~(1 << chanID); + + c->dma_chan_base = BCM2835_DMA_CHANIO(d->dma_base, chanID); + + c->dma_irq_number = d->dma_irq_numbers[chanID]; + + c->dma_ch = chanID; + } else { + return -ENOMEM; + } + + c->dma_irq_handler.name = "DMA engine IRQ handler"; + c->dma_irq_handler.flags = 0; + c->dma_irq_handler.handler = bcm2835_dma_callback; + + ret = request_any_context_irq(c->dma_irq_number, + bcm2835_dma_callback, 0, "DMA IRQ", c); + if (ret < 0) + return ret; + + return 0; +} + +static void bcm2835_dma_free_chan_resources(struct dma_chan *chan) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + struct bcm2835_dmadev *d = to_bcm2835_dma_dev(chan->device); + + vchan_free_chan_resources(&c->vc); + d->chans_available |= (1 << c->dma_ch); + free_irq(c->dma_irq_number, c); + + dev_dbg(c->vc.chan.device->dev, "freeing channel for %u\n", c->dma_sig); +} + +static size_t bcm2835_dma_sg_size(struct bcm2835_sg *sg) +{ + return sg->en * sg->fn; +} + +static size_t bcm2835_dma_desc_size(struct bcm2835_desc *d) +{ + unsigned i; + size_t size; + + for (size = i = 0; i < d->sglen; i++) + size += bcm2835_dma_sg_size(&d->sg[i]); + + return size * es_bytes[d->es]; +} + +static size_t bcm2835_dma_desc_size_pos(struct bcm2835_desc *d, dma_addr_t addr) +{ + unsigned i; + size_t size; + + for (size = i = 0; i < d->sglen; i++) { + size_t this_size = bcm2835_dma_sg_size(&d->sg[i]); + + if (size) + size += this_size; + else if (addr >= d->sg[i].addr && + addr < d->sg[i].addr + this_size) + size += d->sg[i].addr + this_size - addr; + } + return size; +} + + +/* + * Returns current physical source address for the given DMA channel. + * If the channel is running the caller must disable interrupts prior calling + * this function and process the returned value before re-enabling interrupt to + * prevent races with the interrupt handler. + */ +static dma_addr_t bcm2835_get_dma_src_pos(struct bcm2835_chan *c) +{ + return readl(c->dma_chan_base + BCM2835_DMA_SOURCE_AD); +} + +/* + * Returns current physical destination address for the given DMA channel. + * If the channel is running the caller must disable interrupts prior calling + * this function and process the returned value before re-enabling interrupt to + * prevent races with the interrupt handler. + */ +static dma_addr_t bcm2835_get_dma_dst_pos(struct bcm2835_chan *c) +{ + return readl(c->dma_chan_base + BCM2835_DMA_DEST_AD); +} + +static enum dma_status bcm2835_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *txstate) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + struct virt_dma_desc *vd; + enum dma_status ret; + unsigned long flags; + + ret = dma_cookie_status(chan, cookie, txstate); + if (ret == DMA_SUCCESS || !txstate) + return ret; + + spin_lock_irqsave(&c->vc.lock, flags); + vd = vchan_find_desc(&c->vc, cookie); + if (vd) { + txstate->residue = + bcm2835_dma_desc_size(to_bcm2835_dma_desc(&vd->tx)); + } else if (c->desc && c->desc->vd.tx.cookie == cookie) { + struct bcm2835_desc *d = c->desc; + dma_addr_t pos; + + if (d->dir == DMA_MEM_TO_DEV) + pos = bcm2835_get_dma_src_pos(c); + else if (d->dir == DMA_DEV_TO_MEM) + pos = bcm2835_get_dma_dst_pos(c); + else + pos = 0; + + txstate->residue = bcm2835_dma_desc_size_pos(d, pos); + } else { + txstate->residue = 0; + } + + spin_unlock_irqrestore(&c->vc.lock, flags); + + return ret; +} + +static void bcm2835_dma_issue_pending(struct dma_chan *chan) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + unsigned long flags; + + spin_lock_irqsave(&c->vc.lock, flags); + if (vchan_issue_pending(&c->vc) && !c->desc) { + struct bcm2835_dmadev *d = to_bcm2835_dma_dev(chan->device); + spin_lock(&d->lock); + if (list_empty(&c->node)) + list_add_tail(&c->node, &d->pending); + spin_unlock(&d->lock); + tasklet_schedule(&d->task); + } + spin_unlock_irqrestore(&c->vc.lock, flags); +} + + +static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_transfer_direction direction, + unsigned long flags, void *context) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + enum dma_slave_buswidth dev_width; + struct bcm2835_desc *d; + dma_addr_t dev_addr; + unsigned int es, sync_type, sync_dreq; + + /* Grab configuration */ + if (direction == DMA_DEV_TO_MEM) { + dev_addr = c->cfg.src_addr; + dev_width = c->cfg.src_addr_width; + sync_type = BCM2835_DMA_S_DREQ; + sync_dreq = c->cfg.slave_id; + } else if (direction == DMA_MEM_TO_DEV) { + dev_addr = c->cfg.dst_addr; + dev_width = c->cfg.dst_addr_width; + sync_type = BCM2835_DMA_D_DREQ; + sync_dreq = c->cfg.slave_id; + } else { + dev_err(chan->device->dev, "%s: bad direction?\n", __func__); + return NULL; + } + + /* Bus width translates to the element size (ES) */ + switch (dev_width) { + case DMA_SLAVE_BUSWIDTH_4_BYTES: + es = BCM2835_DMA_DATA_TYPE_S32; + break; + default: + return NULL; + } + + /* Now allocate and setup the descriptor. */ + d = kzalloc(sizeof(*d) + sizeof(d->sg[0]), GFP_ATOMIC); + if (!d) + return NULL; + + d->dir = direction; + d->dev_addr = dev_addr; + d->es = es; + d->sync_type = sync_type; + d->sync_dreq = sync_dreq; + d->sg[0].addr = buf_addr; + d->sg[0].en = period_len; + d->sg[0].fn = buf_len / period_len; + d->sglen = 1; + + /* Allocate memory for control blocks */ + d->control_block_size = d->sg[0].fn*sizeof(struct bcm2835_dma_cb); + d->control_block_base = dma_alloc_coherent(chan->device->dev, + d->control_block_size, &d->control_block_base_phys, + GFP_KERNEL); + + if (!d->control_block_base) { + dev_err(chan->device->dev, + "%s: Memory allocation error\n", __func__); + return NULL; + } + + memset(d->control_block_base, 0, d->control_block_size); + + if (!c->cyclic) { + c->cyclic = true; + /* nothing else is implemented */ + } + + return vchan_tx_prep(&c->vc, &d->vd, DMA_CTRL_ACK | DMA_PREP_INTERRUPT); +} + +static int bcm2835_dma_slave_config(struct bcm2835_chan *c, + struct dma_slave_config *cfg) +{ + if ((cfg->direction == DMA_DEV_TO_MEM + && cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) || + (cfg->direction == DMA_MEM_TO_DEV + && cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES)) { + return -EINVAL; + } + + memcpy(&c->cfg, cfg, sizeof(c->cfg)); + + return 0; +} + +static int bcm2835_dma_terminate_all(struct bcm2835_chan *c) +{ + struct bcm2835_dmadev *d = to_bcm2835_dma_dev(c->vc.chan.device); + unsigned long flags; + LIST_HEAD(head); + + spin_lock_irqsave(&c->vc.lock, flags); + + /* Prevent this channel being scheduled */ + spin_lock(&d->lock); + list_del_init(&c->node); + spin_unlock(&d->lock); + + /* + * Stop DMA activity: we assume the callback will not be called + * after bcm_dma_abort() returns (even if it does, it will see + * c->desc is NULL and exit.) + */ + if (c->desc) { + c->desc = NULL; + bcm2835_dma_abort(c->dma_chan_base); + + /* Wait for stopping */ + while (readl(c->dma_chan_base + BCM2835_DMA_CS) + & BCM2835_DMA_ACTIVE) + ; + } + + vchan_get_all_descriptors(&c->vc, &head); + spin_unlock_irqrestore(&c->vc.lock, flags); + vchan_dma_desc_free_list(&c->vc, &head); + + return 0; +} + +static int bcm2835_dma_pause(struct bcm2835_chan *c) +{ + /* FIXME: not supported by platform private API */ + return -EINVAL; +} + +static int bcm2835_dma_resume(struct bcm2835_chan *c) +{ + /* FIXME: not supported by platform private API */ + return -EINVAL; +} + +static int bcm2835_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + int ret; + + switch (cmd) { + case DMA_SLAVE_CONFIG: + ret = bcm2835_dma_slave_config(c, + (struct dma_slave_config *)arg); + break; + + case DMA_TERMINATE_ALL: + ret = bcm2835_dma_terminate_all(c); + break; + + case DMA_PAUSE: + ret = bcm2835_dma_pause(c); + break; + + case DMA_RESUME: + ret = bcm2835_dma_resume(c); + break; + + default: + ret = -ENXIO; + break; + } + + return ret; +} + +static int bcm2835_dma_chan_init(struct bcm2835_dmadev *od, int dma_sig) +{ + struct bcm2835_chan *c; + + c = kzalloc(sizeof(*c), GFP_KERNEL); + if (!c) + return -ENOMEM; + + c->dma_sig = dma_sig; + c->vc.desc_free = bcm2835_dma_desc_free; + vchan_init(&c->vc, &od->ddev); + INIT_LIST_HEAD(&c->node); + + od->ddev.chancnt++; + + return 0; +} + +static void bcm2835_dma_free(struct bcm2835_dmadev *od) +{ + tasklet_kill(&od->task); + while (!list_empty(&od->ddev.channels)) { + struct bcm2835_chan *c = list_first_entry(&od->ddev.channels, + struct bcm2835_chan, vc.chan.device_node); + + list_del(&c->vc.chan.device_node); + tasklet_kill(&c->vc.task); + kfree(c); + } +} + +#if defined(CONFIG_OF) +static const struct of_device_id bcm2835_dma_of_match[] = { + { + .compatible = "brcm,bcm2835-dma", + } +}; +MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match); +#endif + +static int bcm2835_dma_probe(struct platform_device *pdev) +{ + struct bcm2835_dmadev *od; + struct resource *dma_res = NULL; + void __iomem *dma_base = NULL; + int rc = 0; + int i; + struct resource *irq; + int irq_resources; + + od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL); + if (!od) + return -ENOMEM; + + dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dma_base = devm_ioremap_resource(&pdev->dev, dma_res); + if (IS_ERR(dma_base)) + return PTR_ERR(dma_base); + + od->dma_base = dma_base; + od->chans_available = BCM2835_DMA_CHANNEL_MASK; + + dma_cap_set(DMA_SLAVE, od->ddev.cap_mask); + dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask); + od->ddev.device_alloc_chan_resources = bcm2835_dma_alloc_chan_resources; + od->ddev.device_free_chan_resources = bcm2835_dma_free_chan_resources; + od->ddev.device_tx_status = bcm2835_dma_tx_status; + od->ddev.device_issue_pending = bcm2835_dma_issue_pending; + od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic; + od->ddev.device_control = bcm2835_dma_control; + od->ddev.dev = &pdev->dev; + INIT_LIST_HEAD(&od->ddev.channels); + INIT_LIST_HEAD(&od->pending); + spin_lock_init(&od->lock); + + tasklet_init(&od->task, bcm2835_dma_sched, (unsigned long)od); + + irq_resources = 0; + + for (i = 0; i < pdev->num_resources; i++) { + if (IORESOURCE_IRQ == resource_type(&pdev->resource[i])) + irq_resources++; + } + + od->dma_irq_numbers = devm_kzalloc(&pdev->dev, + irq_resources*sizeof(int), GFP_KERNEL); + if (!od) + return -ENOMEM; + + for (i = 0; i < irq_resources; i++) { + rc = bcm2835_dma_chan_init(od, i); + if (rc) { + bcm2835_dma_free(od); + return rc; + } + + irq = platform_get_resource(pdev, IORESOURCE_IRQ, i); + if (!irq) { + dev_err(&pdev->dev, + "No IRQ resource for channel %i\n", i); + return -ENODEV; + } + od->dma_irq_numbers[i] = irq->start; + } + + rc = dma_async_device_register(&od->ddev); + if (rc) { + dev_err(&pdev->dev, + "Failed to register slave DMA engine device: %d\n", rc); + bcm2835_dma_free(od); + return rc; + } + + platform_set_drvdata(pdev, od); + + if (pdev->dev.of_node) { + bcm2835_dma_info.dma_cap = od->ddev.cap_mask; + + /* Device-tree DMA controller registration */ + rc = of_dma_controller_register(pdev->dev.of_node, + of_dma_simple_xlate, &bcm2835_dma_info); + if (rc) { + dev_err(&pdev->dev, "Failed to register DMA controller\n"); + dma_async_device_unregister(&od->ddev); + bcm2835_dma_free(od); + return rc; + } + } + + dev_dbg(&pdev->dev, "Load BCM2835 DMA engine driver\n"); + + return rc; +} + +static int bcm2835_dma_remove(struct platform_device *pdev) +{ + struct bcm2835_dmadev *od = platform_get_drvdata(pdev); + + dma_async_device_unregister(&od->ddev); + bcm2835_dma_free(od); + + return 0; +} + +static struct platform_driver bcm2835_dma_driver = { + .probe = bcm2835_dma_probe, + .remove = bcm2835_dma_remove, + .driver = { + .name = "bcm2835-dma", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(bcm2835_dma_of_match), + }, +}; + +static const struct platform_device_info bcm2835_dma_dev_info = { + .name = "bcm2835-dma", + .id = -1, + .dma_mask = DMA_BIT_MASK(32), +}; + +static int bcm2835_dma_init(void) +{ + int rc = platform_driver_register(&bcm2835_dma_driver); + return rc; +} +subsys_initcall(bcm2835_dma_init); + +static void __exit bcm2835_dma_exit(void) +{ + platform_driver_unregister(&bcm2835_dma_driver); +} +module_exit(bcm2835_dma_exit); + +MODULE_AUTHOR("Florian Meier"); +MODULE_DESCRIPTION("BCM2835 DMA engine driver"); +MODULE_LICENSE("GPL"); + -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html