Re: [RFC 2/9] clk: bcm2835: add support for parent selection in DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






On 21.01.2016 09:26, Sascha Hauer wrote:
Martin,

On Tue, Jan 19, 2016 at 02:51:33PM +0000, kernel@xxxxxxxxxxxxxxxx wrote:
From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>

Allow for a per clock custom selection of clocks in the device tree.

Basic setup in dt looks like this:
   clock@BCM2835_CLOCK_PCM {
     reg = <BCM2835_CLOCK_PCM>;
     parent-clock-names = "xosc", "plld_per", "plla_per", "pll_aux_per";
   };

Isn't this the same as the already existing assigned-clock-parents property?
If yes, that should be used.
It is not 100% identical, as the parent-clock-names do provide ordering
of clocks to be selected, which - under some circumstances may be
beneficial - e.g: when having a parent clock with 500MHz and 1000MHz,
then the higher clock could get given preference by switching ordering...

Also when using:
assigned-clock-parents = <&clk_osc 0>, <&clocks BCM2835_PLLD_PER>;

I get strange indexes passed when calling set_parent - so this would
need to get rewritten to support assigned-clock-parents correctly -
calculating the index on the fly...


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux