On Nov 5, 2013, at 8:28 AM, Sebastian Hesselbarth wrote: > This adds very basic device tree files for the Marvell Armada 1500 SoC > (Berlin BG2) and the Sony NSZ-GS7 GoogleTV board. Currently, SoC only has > nodes for cpus, some clocks, l2 cache controller, local timer, apb timers, > uart, and interrupt controllers. The Sony NSZ-GS7 is a GoogleTV consumer > device comprising the Armada 1500 SoC above. > > Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx> > Reviewed-by: Jason Cooper <jason@xxxxxxxxxxxxxx> > Reviewed-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> > Reviewed-by: Arnd Bergmann <arnd@xxxxxxxx> > Reviewed-by: Jisheng Zhang <jszhang@xxxxxxxxxxx> > --- > Changelog: > v1->v2: > - add "arm,pl310-cache" compatible to l2cc (Suggested by Mark Rutland) > - replace 88DE3xxx numbering with SoC variant name > (Requested by Jisheng Zhang) > RCFv2->v1: > - switch to (soon to be) correct "marvell,pj4b" cpu compatible > - reference fixed-clock for uarts instead of hard-coded clock-frequency > - disable timers except two for clksrc and clkevt > RFCv1->RFCv2: > - add binding documentation (Reported by Jason Cooper) > - change l2cc from aurora to tauros3 (Reported by Thomas Petazzoni) > - add copyright reference > - adapt compatibles to mach-berlin instead of mach-mvebu > > Cc: Rob Herring <rob.herring@xxxxxxxxxxx> > Cc: Pawel Moll <pawel.moll@xxxxxxx> > Cc: Mark Rutland <mark.rutland@xxxxxxx> > Cc: Stephen Warren <swarren@xxxxxxxxxxxxx> > Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx> > Cc: Rob Landley <rob@xxxxxxxxxxx> > Cc: Russell King <linux@xxxxxxxxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: linux-doc@xxxxxxxxxxxxxxx > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx > --- > .../devicetree/bindings/arm/marvell,berlin.txt | 24 +++ > arch/arm/boot/dts/Makefile | 2 + > arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts | 29 +++ > arch/arm/boot/dts/berlin2.dtsi | 227 ++++++++++++++++++++ > 4 files changed, 282 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/marvell,berlin.txt > create mode 100644 arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts > create mode 100644 arch/arm/boot/dts/berlin2.dtsi Haven't we been trying to go away from non-prefixed dts/dtsi? So should these be something like marvell-berlin2-... - k -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html