Hi,
On 01/06/2016 09:33 AM, Chris Zhong wrote:
The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller
IP. This series adds support for a Synopsys DesignWare MIPI DSI host
controller DRM driver.
The MIPI DSI feature is tested on rk3288 evb board, backport them to
chrome os kernel chrome_v3.14, and it can display normally.
This patchset is base on the patchset from Ying.liu@xxxxxxxxxxxxx.
<http://www.spinics.net/lists/dri-devel/msg77181.html>
According to the suggestion from Thierry, I have get rid of the bridge,
and register the encoder & connecter in drm/rockchip/dw-mipi-dsi.c.
I've raised this question too late, but what was the reason to not
implement the DSI block as a bridge driver?
The drm/hisilicon IP seems to use a very similar DSI Designware IP (the
register offsets seems to be the same). There is a good potential of
re-use here by different kms drivers here the way it's already done for
DW HDMI and the analogix DP driver that's in review process.
Archit
After backport below patches from linux-next, I can merge this serial into
Dave's drm-next branch.
94d5d6a0fbf3 clk: rockchip: add an id for rk3288 crypto clk
c6d49fbcfcc4 clk: rockchip: add id for mipidsi sclk on rk3288
a2f4c560f18e clk: rockchip: add mipidsi clock on rk3288
69c923743640 ARM: dts: rockchip: correct the name of REG8 for rk3288-evb-act8846
662513a14c9d ARM: dts: rockchip: add 2 regulators for rk3288-evb-act8846
b04061e6599b ARM: dts: rockchip: move the public part to rk3288-evb common
Changes in v7:
- modify the config to tristate for modules build (Mark Yao)
- Pass NULL 'name' to drm_encoder_init() to fix compile err (Mark Yao)
- Move the lcd_en control to act8846 dts
Changes in v6:
- update the document, since the bridge device has been deleted.
- move the mipi_en gate to ockchip_drm_crtc_mode_config
- Remove the atomic feature check (Mark Yao)
- Add atomic API support (Heiko Stübne)
- Do not use bridge driver (Thierry Reding)
- Optimization the phy init sequence
Changes in v5:
- modify the clk name to SCLK_MIPIDSI_24M
- add a blank line befor lcd_en
Changes in v4:
- use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
Changes in v3:
- move dw_mipi_dsi_rockchip.txt to bindings/display/rockchip/
Chris Zhong (5):
drm/rockchip: return a true clock rate to adjusted_mode
Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
drm: rockchip: Support Synopsys DW MIPI DSI
ARM: dts: rockchip: add rk3288 mipi_dsi nodes
ARM: dts: rockchip: add support mipi panel tv080wum-nl0
.../display/rockchip/dw_mipi_dsi_rockchip.txt | 60 +
arch/arm/boot/dts/rk3288-evb-act8846.dts | 2 +
arch/arm/boot/dts/rk3288-evb.dtsi | 12 +-
arch/arm/boot/dts/rk3288.dtsi | 39 +
drivers/gpu/drm/rockchip/Kconfig | 10 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 1196 ++++++++++++++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 8 +
8 files changed, 1327 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
