Hi Andre,
On Fri, Feb 5, 2016 at 9:04 PM, Andre Przywara <andre.przywara@xxxxxxx> wrote:
> Hi,
>
> On 05/02/16 09:03, Maxime Ripard wrote:
>> Hi,
>>
>> On Mon, Feb 01, 2016 at 05:39:30PM +0000, Andre Przywara wrote:
>>> The Pine64 is a cost-efficient development board based on the
>>> Allwinner A64 SoC.
>>> There are three models: the basic version with Fast Ethernet and
>>> 512 MB of DRAM (Pine64) and two Pine64+ versions, which both
>>> feature Gigabit Ethernet and additional connectors for touchscreens
>>> and a camera. Or as my son put it: "Those are smaller and these are
>>> missing." ;-)
>>> The two Pine64+ models just differ in the amount of DRAM
>>> (1GB vs. 2GB). Since U-Boot will figure out the right size for us and
>>> patches the DT accordingly we just need to provide one DT for the
>>> Pine64+.
>>>
>>> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
>>> ---
>>> .../devicetree/bindings/vendor-prefixes.txt | 1 +
>>> arch/arm64/boot/dts/Makefile | 1 +
>>> arch/arm64/boot/dts/allwinner/Makefile | 5 ++
>>> arch/arm64/boot/dts/allwinner/pine64.dts | 58 +++++++++++++++++
>>> arch/arm64/boot/dts/allwinner/pine64_common.dtsi | 76 ++++++++++++++++++++++
>>> arch/arm64/boot/dts/allwinner/pine64_plus.dts | 59 +++++++++++++++++
>>> 6 files changed, 200 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/allwinner/Makefile
>>> create mode 100644 arch/arm64/boot/dts/allwinner/pine64.dts
>>> create mode 100644 arch/arm64/boot/dts/allwinner/pine64_common.dtsi
>>> create mode 100644 arch/arm64/boot/dts/allwinner/pine64_plus.dts
>>>
>>> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
>>> index 72e2c5a..0c22fa9 100644
>>> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
>>> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
>>> @@ -175,6 +175,7 @@ parade Parade Technologies Inc.
>>> pericom Pericom Technology Inc.
>>> phytec PHYTEC Messtechnik GmbH
>>> picochip Picochip Ltd
>>> +pine64 Pine64
>>> plathome Plat'Home Co., Ltd.
>>> plda PLDA
>>> pixcir PIXCIR MICROELECTRONICS Co., Ltd
>>
>> Please make a separate patch for this one.
>>
>>> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
>>> index f832b8a..3b7428a 100644
>>> --- a/arch/arm64/boot/dts/Makefile
>>> +++ b/arch/arm64/boot/dts/Makefile
>>> @@ -1,3 +1,4 @@
>>> +dts-dirs += allwinner
>>
>> Could you also add a patch to add this path to MAINTAINERS too?
>>
>>> dts-dirs += altera
>>> dts-dirs += amd
>>> dts-dirs += apm
>>> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
>>> new file mode 100644
>>> index 0000000..65f4e24
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/allwinner/Makefile
>>> @@ -0,0 +1,5 @@
>>> +dtb-$(CONFIG_ARCH_SUNXI) += pine64_plus.dtb pine64.dtb
>>> +
>>> +always := $(dtb-y)
>>> +subdir-y := $(dts-dirs)
>>> +clean-files := *.dtb
>>> diff --git a/arch/arm64/boot/dts/allwinner/pine64.dts b/arch/arm64/boot/dts/allwinner/pine64.dts
>>> new file mode 100644
>>> index 0000000..ebea5dd
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/allwinner/pine64.dts
>>> @@ -0,0 +1,58 @@
>>> +/*
>>> + * Copyright (c) 2016 ARM Ltd.
>>> + *
>>> + * This file is dual-licensed: you can use it either under the terms
>>> + * of the GPL or the X11 license, at your option. Note that this dual
>>> + * licensing only applies to this file, and not this project as a
>>> + * whole.
>>> + *
>>> + * a) This library is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of the
>>> + * License, or (at your option) any later version.
>>> + *
>>> + * This library is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * Or, alternatively,
>>> + *
>>> + * b) Permission is hereby granted, free of charge, to any person
>>> + * obtaining a copy of this software and associated documentation
>>> + * files (the "Software"), to deal in the Software without
>>> + * restriction, including without limitation the rights to use,
>>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>>> + * sell copies of the Software, and to permit persons to whom the
>>> + * Software is furnished to do so, subject to the following
>>> + * conditions:
>>> + *
>>> + * The above copyright notice and this permission notice shall be
>>> + * included in all copies or substantial portions of the Software.
>>> + *
>>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>>> + * OTHER DEALINGS IN THE SOFTWARE.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "pine64_common.dtsi"
>>> +
>>> +/ {
>>> + model = "Pine64";
>>> + compatible = "pine64,pine64", "allwinner,a64", "allwinner,sunxi";
>>> +
>>> + chosen {
>>> + stdout-path = "serial0:115200n8";
>>> + };
>>> +
>>> + memory {
>>> + reg = <0x40000000 0x20000000>;
>>> + };
>>> +};
>>> diff --git a/arch/arm64/boot/dts/allwinner/pine64_common.dtsi b/arch/arm64/boot/dts/allwinner/pine64_common.dtsi
>>> new file mode 100644
>>> index 0000000..d968d76
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/allwinner/pine64_common.dtsi
>>> @@ -0,0 +1,76 @@
>>> +/*
>>> + * Copyright (c) 2016 ARM Ltd.
>>> + *
>>> + * This file is dual-licensed: you can use it either under the terms
>>> + * of the GPL or the X11 license, at your option. Note that this dual
>>> + * licensing only applies to this file, and not this project as a
>>> + * whole.
>>> + *
>>> + * a) This library is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of the
>>> + * License, or (at your option) any later version.
>>> + *
>>> + * This library is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * Or, alternatively,
>>> + *
>>> + * b) Permission is hereby granted, free of charge, to any person
>>> + * obtaining a copy of this software and associated documentation
>>> + * files (the "Software"), to deal in the Software without
>>> + * restriction, including without limitation the rights to use,
>>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>>> + * sell copies of the Software, and to permit persons to whom the
>>> + * Software is furnished to do so, subject to the following
>>> + * conditions:
>>> + *
>>> + * The above copyright notice and this permission notice shall be
>>> + * included in all copies or substantial portions of the Software.
>>> + *
>>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>>> + * OTHER DEALINGS IN THE SOFTWARE.
>>> + */
>>> +
>>> +#include "a64.dtsi"
>>> +
>>> +&mmc0 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&mmc0_pins>, <&mmc0_default_cd_pin>;
>>> + vmmc-supply = <®_vcc3v3>;
>>> + cd-gpios = <&pio 5 6 0>;
>>> + cd-inverted;
>>> + status = "okay";
>>> +};
>>> +
>>> +&uart0 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart0_pins_a>;
>>> + status = "okay";
>>> +};
>>> +
>>> +&uart2 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart2_pins>;
>>> + status = "okay";
>>> +};
>>> +
>>> +&uart3 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart3_pins_a>;
>>> + status = "okay";
>>> +};
>>> +
>>> +&uart4 {
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&uart4_pins>;
>>> + status = "okay";
>>> +};
>>
>> Our policy for boards with "open" pin headers the user can plug
>> anything he wants is that unless the pin is explicitly dedicated to
>> that usage, we simply leave them aside so that we don't enforce
>> anything.
>
> Makes sense, I just wonder what a user is expected to do if she wants to
> use the serial ports?
> Hack the DT?
> Use U-Boot to create those nodes on the fly?
> Use overlays?
> Directly setup serial ports from userland? (thinking of this bloody
> mechanism x86 (used to?) have)
I believe that device tree overlays are the generally recommended method.
Thanks,
--
Julian Calaby
Email: julian.calaby@xxxxxxxxx
Profile: http://www.google.com/profiles/julian.calaby/
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
