Re: [PATCH v2 3/4] ARM: LG Optimus Black (P970) codename sniper support, with basic features

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

Le vendredi 05 février 2016 à 19:42 +0100, Paul Kocialkowski a écrit :
> The LG Optimus Black (P970) codename sniper is a smartphone that was designed
> and manufactured by LG Electronics (LGE) and released back in 2011.
> It is using an OMAP3630 SoC, GP version.
> 
> This adds devicetree support for the device, with only a few basic features
> supported, such as debug uart, i2c, internal emmc and external mmc.
> 
> Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx>
> ---
>  arch/arm/boot/dts/Makefile         |   1 +
>  arch/arm/boot/dts/omap3-sniper.dts | 215 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 216 insertions(+)
>  create mode 100644 arch/arm/boot/dts/omap3-sniper.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index a4a6d70..7314cf8 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -460,6 +460,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
>  	omap3-sbc-t3517.dtb \
>  	omap3-sbc-t3530.dtb \
>  	omap3-sbc-t3730.dtb \
> +	omap3-sniper.dtb \
>  	omap3-thunder.dtb \
>  	omap3-zoom3.dtb
>  dtb-$(CONFIG_SOC_TI81XX) += \
> diff --git a/arch/arm/boot/dts/omap3-sniper.dts b/arch/arm/boot/dts/omap3-sniper.dts
> new file mode 100644
> index 0000000..24bcd82
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-sniper.dts
> @@ -0,0 +1,215 @@
> +/*
> + * Copyright (C) 2015-2016 Paul Kocialkowski <contact@xxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +/dts-v1/;
> +
> +#include "omap36xx.dtsi"
> +
> +/ {
> +	model = "LG Optimus Black (P970)";
> +	compatible = "lge,omap3-sniper", "ti,omap36xx", "ti,omap3";
> +
> +	cpus {
> +		cpu@0 {
> +			cpu0-supply = <&vcc>;
> +		};
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x80000000 0x20000000>; /* 512 MB */
> +	};
> +};
> +
> +&omap3_pmx_core {
> +	pinctrl-names = "default";
> +
> +	uart3_pins: pinmux_uart3_pins {
> +		pinctrl-single,pins = <
> +			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)	/* uart3_rx_irrx */
> +			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx */
> +		>;
> +	};
> +
> +	dp3t_sel_pins: pinmux_dp3t_sel_pins {
> +		pinctrl-single,pins = <
> +			OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE4)	/* gpio_161 */
> +			OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4)	/* gpio_162 */
> +		>;
> +	};
> +
> +	i2c1_pins: pinmux_i2c1_pins {
> +		pinctrl-single,pins = <
> +			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)	/* i2c1_scl */
> +			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)	/* i2c1_sda */
> +		>;
> +	};
> +
> +	i2c2_pins: pinmux_i2c2_pins {
> +		pinctrl-single,pins = <
> +			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0)	/* i2c2_scl */
> +			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0)	/* i2c2_sda */
> +		>;
> +	};
> +
> +	i2c3_pins: pinmux_i2c3_pins {
> +		pinctrl-single,pins = <
> +			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0)	/* i2c3_scl */
> +			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0)	/* i2c3_sda */
> +		>;
> +	};
> +
> +	lp8720_en_pin: pinmux_lp8720_en_pin {
> +		pinctrl-single,pins = <
> +			OMAP3_CORE1_IOPAD(0x2080, PIN_OUTPUT | MUX_MODE4)	/* gpio_37 */
> +		>;
> +	};
> +
> +	mmc1_pins: pinmux_mmc1_pins {
> +		pinctrl-single,pins = <
> +			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT | MUX_MODE0)	/* sdmmc1_clk */
> +			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd */
> +			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0 */
> +			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1 */
> +			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2 */
> +			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3 */
> +		>;
> +	};
> +
> +	mmc2_pins: pinmux_mmc2_pins {
> +		pinctrl-single,pins = <
> +			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT | MUX_MODE0)	/* sdmmc2_clk */
> +			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT | MUX_MODE0)	/* sdmmc2_cmd */
> +			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat0 */
> +			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat1 */
> +			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat2 */
> +			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat3 */
> +			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat4 */
> +			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat5 */
> +			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat6 */
> +			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE0)	/* sdmmc2_dat7 */
> +		>;
> +	};
> +};
> +
> +&omap3_pmx_wkup {
> +	pinctrl-names = "default";
> +
> +	mmc1_cd_pin: pinmux_mmc1_cd_pin {
> +		pinctrl-single,pins = <
> +			OMAP3_WKUP_IOPAD(0x2a1a, PIN_INPUT | MUX_MODE4)		/* gpio_10 */
> +		>;
> +	};
> +};
> +
> +&gpio2 {
> +	ti,no-reset-on-init;
> +};
> +
> +&gpio5 {
> +	ti,no-reset-on-init;
> +};
> +
> +&gpio6 {
> +	ti,no-reset-on-init;
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart3_pins &dp3t_sel_pins>;
> +
> +	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1_pins>;
> +
> +	clock-frequency = <2600000>;
> +
> +	twl: twl@48 {
> +		reg = <0x48>;
> +		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
> +		interrupt-parent = <&intc>;
> +
> +		twl_power: power {
> +			compatible = "ti,twl4030-power";
> +			ti,use_poweroff;
> +		};
> +	};
> +};
> +
> +#include "twl4030.dtsi"
> +#include "twl4030_omap3.dtsi"
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c2_pins>;
> +
> +	clock-frequency = <400000>;
> +};
> +
> +&i2c3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c3_pins>;
> +
> +	clock-frequency = <400000>;
> +
> +	lp8720@7d {
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&lp8720_en_pin>;
> +
> +		compatible = "ti,lp8720";
> +		reg = <0x7d>;
> +
> +		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; /* gpio_37 */
> +
> +		lp8720_ldo1: ldo1 {
> +			regulator-min-microvolt = <3000000>;
> +			regulator-max-microvolt = <3000000>;
> +		};
> +	};
> +};
> +
> +&mmc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc1_pins &mmc1_cd_pin>;
> +	vmmc-supply = <&lp8720_ldo1>;
> +	cd-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* gpio 10 */
> +	bus-width = <4>;
> +};
> +
> +&mmc2 {
> +

Please discard this newline in case v2 gets merged.

> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc2_pins>;
> +	vmmc-supply = <&vmmc2>;
> +	ti,non-removable;
> +	bus-width = <8>;
> +};
> +
> +&mmc3 {
> +	status = "disabled";
> +};
> +
> +/*
> + * The TWL4030 VAUX2 and VDAC regulators power sensors that are slaves on I2C3.
> + * When not powered, these sensors cause the I2C3 clock to stay low at all times,
> + * making it impossible to reach other devices on I2C3.
> + */
> +
> +&vaux2 {
> +	regulator-min-microvolt = <2800000>;
> +	regulator-max-microvolt = <2800000>;
> +	regulator-always-on;
> +};
> +
> +&vdac {
> +	regulator-min-microvolt = <1800000>;
> +	regulator-max-microvolt = <1800000>;
> +	regulator-always-on;
> +};

Attachment: signature.asc
Description: This is a digitally signed message part


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux