This patch adds manual pull up setting for usb otg indicating that the vbus is vbus is not routed to USB controller/phy therefore enables pull-up explicitly before starting controller. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index ff7ca44..c1592d4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -399,6 +399,7 @@ qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>; dr_mode = "peripheral"; qcom,otg-control = <2>; // PMIC + qcom,manual-pullup; clocks = <&gcc GCC_USB_HS_AHB_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>, -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
