Hi,
On mar., févr. 02 2016, One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx> wrote:
>> +static void mvebu_uart_set_termios(struct uart_port *port,
>> + struct ktermios *termios,
>> + struct ktermios *old)
>> +{
>> + unsigned long flags;
>> + unsigned int baud;
>> +
>> + spin_lock_irqsave(&port->lock, flags);
>> +
>> + port->read_status_mask = STAT_RX_RDY | STAT_OVR_ERR |
>> + STAT_TX_RDY | STAT_TX_FIFO_FUL;
>> +
>> + if (termios->c_iflag & INPCK)
>> + port->read_status_mask |= STAT_FRM_ERR | STAT_PAR_ERR;
>> +
>> + port->ignore_status_mask = 0;
>> + if (termios->c_iflag & IGNPAR)
>> + port->ignore_status_mask |=
>> + STAT_FRM_ERR | STAT_PAR_ERR | STAT_OVR_ERR;
>> +
>> + if ((termios->c_cflag & CREAD) == 0)
>> + port->ignore_status_mask |= STAT_RX_RDY | STAT_BRK_ERR;
>
> If you don't support parity or charactive size then you should be forcing
> those bits in the tty->termios so that the caller sees what settings they
> get. tty_termios_copy_hw is close to what you need except that you can
> support IGNPAR.
OK thanks for the pointer.
>
> You also want to provide the actual baud rate chosen (see how 8250.c does
> it using tty_termios_encode_baud_rate().
>
>
>> +static struct uart_driver mvebu_uart_driver = {
>> + .owner = THIS_MODULE,
>> + .driver_name = "serial",
>> + .dev_name = "ttyS",
>> + .major = TTY_MAJOR,
>> + .minor = 64,
>
> NAK
>
> TTY_MAJOR 64+ is the 8250 driver and ttyS is the 8250 driver name. You
> should be using a dynamic major (0) for all new drivers and you need to
> pick a different and unused ttyXXX format name.
I missed this one, I will remove .major and .minor and use our own
ttyXX.
Thanks,
Gregory
>
> Alan
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
