The hub and the ethernet in its port 1 are hardwired on the board. Compared to the adapters that can be plugged into the USB ports, this one has no serial EEPROM to store its MAC. Nevertheless, the Raspberry Pi has the MAC address for this adapter in its ROM, accessible from its firmware. U-Boot can read out the address and set the local-mac-address property of the node with "ethernet" alias. Let's add the node so that U-Boot can do its business. Signed-off-by: Lubomir Rintel <lkundrak@xxxxx> --- arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 18 ++++++++++++++++++ arch/arm/boot/dts/bcm283x.dtsi | 4 +++- 2 files changed, 21 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index ef54050..32bbd2a 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -6,6 +6,10 @@ compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; model = "Raspberry Pi Model B+"; + aliases { + ethernet = ðernet; + } + leds { act { gpios = <&gpio 47 0>; @@ -29,3 +33,17 @@ brcm,function = <BCM2835_FSEL_ALT0>; }; }; + +&usb { + usb1@01 { + compatible = "usb1d6b,0002"; + reg = <01>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@01 { + compatible = "usb0424,9514"; + reg = <01>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 971e741..bc5fde1 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -187,10 +187,12 @@ status = "disabled"; }; - usb@7e980000 { + usb: usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; interrupts = <1 9>; + #address-cells = <1>; + #size-cells = <0>; }; }; -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html