On 2/2/2016 3:02 AM, Joshua Henderson wrote:
Document the devicetree bindings for the watchdog peripheral found on Microchip PIC32 SoC class devices. Signed-off-by: Joshua Henderson <joshua.henderson@xxxxxxxxxxxxx> Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx> Cc: <linux-mips@xxxxxxxxxxxxxx> --- Note: Please merge this patch series through the MIPS tree. --- .../bindings/watchdog/microchip,pic32-wdt.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt diff --git a/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt b/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt new file mode 100644 index 0000000..3ce2839 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/microchip,pic32-wdt.txt @@ -0,0 +1,18 @@ +* Microchip PIC32 Watchdog Timer + +When enabled, the watchdog peripheral can be used to reset the device if the +WDT is not cleared periodically in software. + +Required properties: +- compatible: must be "microchip,pic32mzda-wdt". +- reg: physical base address of the controller and length of memory mapped + region. +- clocks: phandle of source clk. should be <&LPRC> clk. + +Example: + + watchdog0: wdt@1f800800 {
The ePAPR standard tells to to use "watchdog@1f800800" as the node name. [...] MBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html