[PATCH 06/11] regulator: axp20x: support AXP809 variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The X-Powers AXP809 PMIC has a similar set of regulators as the AXP221,
though a few LDOs were removed, and a new switch output added. Like the
AXP221, AXP809 also has DC1SW and DC5LDO, which are internally chained
to DCDC1 and DCDC5, respectively.

Add support for this new variant. Also remove the "axp22x_" prefix from
DC1SW/DC5LDO supply handling code, as the AXP809 uses it as well.

Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
 drivers/regulator/axp20x-regulator.c | 119 ++++++++++++++++++++++++++---------
 1 file changed, 90 insertions(+), 29 deletions(-)

diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 81f25383f2d5..c9f2084659e4 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -224,6 +224,61 @@ static const struct regulator_desc axp22x_regulators[] = {
 	AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),
 };
 
+static const struct regulator_linear_range axp809_dcdc4_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2f, 20000),
+	REGULATOR_LINEAR_RANGE(1800000, 0x30, 0x38, 100000),
+};
+
+static const struct regulator_linear_range axp809_dldo1_ranges[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
+	REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
+};
+
+static const struct regulator_desc axp809_regulators[] = {
+	AXP_DESC(AXP809, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
+		 AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)),
+	AXP_DESC(AXP809, DCDC2, "dcdc2", "vin2", 600, 1540, 20,
+		 AXP22X_DCDC2_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(2)),
+	AXP_DESC(AXP809, DCDC3, "dcdc3", "vin3", 600, 1860, 20,
+		 AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)),
+	AXP_DESC_RANGES(AXP809, DCDC4, "dcdc4", "vin4", axp809_dcdc4_ranges,
+			57, AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1,
+			BIT(4)),
+	AXP_DESC(AXP809, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
+		 AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)),
+	/* secondary switchable output of DCDC1 */
+	AXP_DESC_SW(AXP809, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
+		    BIT(7)),
+	/* LDO regulator internally chained to DCDC5 */
+	AXP_DESC(AXP809, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
+		 AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
+	AXP_DESC(AXP809, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)),
+	AXP_DESC(AXP809, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)),
+	AXP_DESC(AXP809, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
+	AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp809_dldo1_ranges,
+			32, AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
+			BIT(3)),
+	AXP_DESC(AXP809, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)),
+	AXP_DESC(AXP809, ELDO1, "eldo1", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
+	AXP_DESC(AXP809, ELDO2, "eldo2", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
+	AXP_DESC(AXP809, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
+	AXP_DESC_IO(AXP809, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
+		    AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_IO(AXP809, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
+		    AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_FIXED(AXP809, RTC_LDO, "rtc_ldo", "ips", 1800),
+	AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
+};
+
 static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 {
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
@@ -239,6 +294,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 		break;
 	case AXP221_ID:
 	case AXP223_ID:
+	case AXP809_ID:
 		min = 1800;
 		max = 4050;
 		def = 3000;
@@ -318,6 +374,7 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
 
 	case AXP221_ID:
 	case AXP223_ID:
+	case AXP809_ID:
 		if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5)
 			return -EINVAL;
 
@@ -346,8 +403,8 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 	};
 	int ret, i, nregulators;
 	u32 workmode;
-	const char *axp22x_dc1_name = axp22x_regulators[AXP22X_DCDC1].name;
-	const char *axp22x_dc5_name = axp22x_regulators[AXP22X_DCDC5].name;
+	const char *dcdc1_name = axp22x_regulators[AXP22X_DCDC1].name;
+	const char *dcdc5_name = axp22x_regulators[AXP22X_DCDC5].name;
 
 	switch (axp20x->variant) {
 	case AXP202_ID:
@@ -360,6 +417,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		regulators = axp22x_regulators;
 		nregulators = AXP22X_REG_ID_MAX;
 		break;
+	case AXP809_ID:
+		regulators = axp809_regulators;
+		nregulators = AXP809_REG_ID_MAX;
+		break;
 	default:
 		dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
 			axp20x->variant);
@@ -382,22 +443,22 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		 * part of this loop to see where we save the DT defined
 		 * name.
 		 */
-		if (regulators == axp22x_regulators) {
-			if (i == AXP22X_DC1SW) {
-				new_desc = devm_kzalloc(&pdev->dev,
-							sizeof(*desc),
-							GFP_KERNEL);
-				*new_desc = regulators[i];
-				new_desc->supply_name = axp22x_dc1_name;
-				desc = new_desc;
-			} else if (i == AXP22X_DC5LDO) {
-				new_desc = devm_kzalloc(&pdev->dev,
-							sizeof(*desc),
-							GFP_KERNEL);
-				*new_desc = regulators[i];
-				new_desc->supply_name = axp22x_dc5_name;
-				desc = new_desc;
-			}
+		if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
+		    (regulators == axp809_regulators && i == AXP809_DC1SW)) {
+			new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
+						GFP_KERNEL);
+			*new_desc = regulators[i];
+			new_desc->supply_name = dcdc1_name;
+			desc = new_desc;
+		}
+
+		if ((regulators == axp22x_regulators && i == AXP22X_DC5LDO) ||
+		    (regulators == axp809_regulators && i == AXP809_DC5LDO)) {
+			new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
+						GFP_KERNEL);
+			*new_desc = regulators[i];
+			new_desc->supply_name = dcdc5_name;
+			desc = new_desc;
 		}
 
 		rdev = devm_regulator_register(&pdev->dev, desc, &config);
@@ -420,17 +481,17 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		/*
 		 * Save AXP22X DCDC1 / DCDC5 regulator names for later.
 		 */
-		if (regulators == axp22x_regulators) {
-			/* Can we use rdev->constraints->name instead? */
-			if (i == AXP22X_DCDC1)
-				of_property_read_string(rdev->dev.of_node,
-							"regulator-name",
-							&axp22x_dc1_name);
-			else if (i == AXP22X_DCDC5)
-				of_property_read_string(rdev->dev.of_node,
-							"regulator-name",
-							&axp22x_dc5_name);
-		}
+		if ((regulators == axp22x_regulators && i == AXP22X_DCDC1) ||
+		    (regulators == axp809_regulators && i == AXP809_DCDC1))
+			of_property_read_string(rdev->dev.of_node,
+						"regulator-name",
+						&dcdc1_name);
+
+		if ((regulators == axp22x_regulators && i == AXP22X_DCDC5) ||
+		    (regulators == axp809_regulators && i == AXP809_DCDC5))
+			of_property_read_string(rdev->dev.of_node,
+						"regulator-name",
+						&dcdc5_name);
 	}
 
 	return 0;
-- 
2.7.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux