Enable SRAM node and stub clock node for Hi6220, which will use mailbox
channel 0 for CPU's frequency change.
Furthermore, add the CPU clock phandle in CPU's node and using
operating-points-v2 to register operating points. So can be used by
cpufreq-dt driver.
Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
---
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 55 +++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index be3d962..d46820a 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -81,6 +81,11 @@
device_type = "cpu";
reg = <0x0 0x0>;
enable-method = "psci";
+ clocks = <&stub_clock 0>;
+ operating-points-v2 = <&cpu_opp_table>;
+ cooling-min-level = <4>;
+ cooling-max-level = <0>;
+ #cooling-cells = <2>; /* min followed by max */
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
@@ -89,6 +94,7 @@
device_type = "cpu";
reg = <0x0 0x1>;
enable-method = "psci";
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
@@ -97,6 +103,7 @@
device_type = "cpu";
reg = <0x0 0x2>;
enable-method = "psci";
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
@@ -105,6 +112,7 @@
device_type = "cpu";
reg = <0x0 0x3>;
enable-method = "psci";
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
@@ -113,6 +121,7 @@
device_type = "cpu";
reg = <0x0 0x100>;
enable-method = "psci";
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
@@ -121,6 +130,7 @@
device_type = "cpu";
reg = <0x0 0x101>;
enable-method = "psci";
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
@@ -129,6 +139,7 @@
device_type = "cpu";
reg = <0x0 0x102>;
enable-method = "psci";
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
@@ -137,10 +148,42 @@
device_type = "cpu";
reg = <0x0 0x103>;
enable-method = "psci";
+ operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
};
+ cpu_opp_table: cpu_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <208000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <500000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <432000000>;
+ opp-microvolt = <1040000>;
+ clock-latency-ns = <500000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <729000000>;
+ opp-microvolt = <1090000>;
+ clock-latency-ns = <500000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <960000000>;
+ opp-microvolt = <1180000>;
+ clock-latency-ns = <500000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1330000>;
+ clock-latency-ns = <500000>;
+ };
+ };
+
gic: interrupt-controller@f6801000 {
compatible = "arm,gic-400";
reg = <0x0 0xf6801000 0 0x1000>, /* GICD */
@@ -168,6 +211,11 @@
#size-cells = <2>;
ranges;
+ sram: sram@fff80000 {
+ compatible = "hisilicon,hi6220-sramctrl", "syscon";
+ reg = <0x0 0xfff80000 0x0 0x12000>;
+ };
+
ao_ctrl: ao_ctrl@f7800000 {
compatible = "hisilicon,hi6220-aoctrl", "syscon";
reg = <0x0 0xf7800000 0x0 0x2000>;
@@ -193,6 +241,13 @@
#clock-cells = <1>;
};
+ stub_clock: stub_clock {
+ compatible = "hisilicon,hi6220-stub-clk";
+ hisilicon,hi6220-clk-sram = <&sram>;
+ #clock-cells = <1>;
+ mboxes = <&mailbox 1>;
+ };
+
uart0: uart@f8015000 { /* console */
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xf8015000 0x0 0x1000>;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
