Hi, > From: Sergei Shtylyov > Sent: Saturday, January 30, 2016 5:50 AM > > On 01/29/2016 11:28 PM, Sergei Shtylyov wrote: > > >>> From: linux-renesas-soc-owner@xxxxxxxxxxxxxxx > >>> [mailto:linux-renesas-soc-owner@xxxxxxxxxxxxxxx] On Behalf Of Sergei > >>> Shtylyov > >>> Sent: Wednesday, January 27, 2016 7:14 AM > >>> > >>> Now that Maxim Integrated MAX3355 'extcon' driver and device tree bindings > >>> are upstream along with the 'extcon' hook in the Renesas USBHS driver, we > >>> can add MAX3355 device node to the Porter device tree and properly refer > >>> to it from the USBHS node instead of using "renesas,enable-gpio" property > >>> which only allowed checking the USB ID pin at the driver probe time; now > >>> this pin's state can be monitored dynamically! > >>> > >>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx> > >> > >> I tested this patch on Porter, but interrupt of "usb-otg" didn't happened > >> even if I connected/disconnected a usb convert cable (usb micro-ab to A). > >> Remarks: I confirmed that the usb convert cable worked correctly on other > >> board. > > > > I guess I have the same cable > > No, I have mini-AB connector here and hence my cable is mini-AB to A. I checked Porter specification and then I found 2 specifications exist... Porter "B" : mini AB connecter and Max3355 is on the board. Porter "C" : micro AB connect and Max3355 is not on the board. (Select host/peripheral by a jumper.) I guess that your current target is "B". If so, I think this patch is acceptable. Best regards, Yoshihiro Shimoda > > and IRQs do happen for me when I connect and > > disconnect it (as it should be). > > >> Best regards, > >> Yoshihiro Shimoda > > MBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
