Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
Based on schematics, tested with remote access.
v4:
- Change one-line summary prefix to match current arm-soc practices,
- Move scif_clk next to scif0, for consistency with other boards,
v3:
- New.
---
arch/arm/boot/dts/r8a7778-bockw.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index a52b359e2ae24a30..21e3b9dda2dabf5e 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -126,11 +126,19 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
scif0_pins: serial0 {
renesas,groups = "scif0_data_a", "scif0_ctrl";
renesas,function = "scif0";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
mmc_pins: mmc {
renesas,groups = "mmc_data8", "mmc_ctrl";
renesas,function = "mmc";
@@ -217,3 +225,8 @@
status = "okay";
};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
