On Tue, Dec 15, 2015 at 02:07:50PM +0800, Bai Ping wrote: > The patch adds dts file for imx6qp-sabresd board. > > Signed-off-by: Bai Ping <b51503@xxxxxxxxxxxxx> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 1 + > arch/arm/boot/dts/imx6qp-sabresd.dts | 59 ++++++++++++++++++++++++++++++++++ > 3 files changed, 61 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6qp-sabresd.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 36d8133..dfba765 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -302,6 +302,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6dl-sabreauto.dtb \ > imx6dl-sabrelite.dtb \ > imx6dl-sabresd.dtb \ > + imx6qp-sabresd.dtb \ Please keep the list sort alphabetically. That said, imx6qp-sabresd.dtb should be added after imx6q-* ones. > imx6dl-tx6dl-comtft.dtb \ > imx6dl-tx6u-801x.dtb \ > imx6dl-tx6u-811x.dtb \ > diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > index a6d445c..f65f57b 100644 > --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > @@ -238,6 +238,7 @@ > regulator-max-microvolt = <3300000>; > regulator-boot-on; > regulator-always-on; > + regulator-ramp-delay = <6250>; So this change applies to imx6q and imx6dl sabresd as well? > }; > > sw3a_reg: sw3a { > diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts > new file mode 100644 > index 0000000..c3ab2b6 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6qp-sabresd.dts > @@ -0,0 +1,59 @@ > +/* > + * Copyright (C) 2015 Freescale Semiconductor, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include "imx6q-sabresd.dts" > +#include "imx6qp.dtsi" Ah, that's why you do not include "imx6qdl.dtsi" in imx6qp.dtsi. I have a question with this approach. How people should write his imx6qp board dts file, if his board never has an imx6q version? > + > +/ { > + model = "Freescale i.MX6 Quad Plus SABRE Smart Device Board"; > + compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp"; > +}; > + > +&cpu0 { > + arm-supply = <&sw2_reg>; > +}; > + > +&iomuxc { > + imx6qdl-sabresd { Since commit 5fcdf6a7ed95 (pinctrl: imx: Allow parsing DT without function nodes), this additional container node can just be saved. Shawn > + pinctrl_usdhc2: usdhc2grp { > + fsl,pins = < > + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 > + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 > + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 > + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 > + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 > + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 > + MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 > + MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 > + MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 > + MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 > + >; > + }; > + }; > +}; > + > +&pcie { > + power-on-gpio = <&gpio3 19 0>; > + reset-gpio = <&gpio7 12 0>; > + status = "okay"; > +}; > -- > 1.9.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html