On Wed, Dec 23, 2015 at 05:00:16PM -0500, Akshay Bhat wrote:
> Add support for Advantech/GE B850v3 board.
>
> Signed-off-by: Akshay Bhat <akshay.bhat@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx6q-b850v3.dts | 157 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 158 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6q-b850v3.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 684a504..b6c6d7a 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -319,6 +319,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
> imx6q-arm2.dtb \
> imx6q-b450v3.dtb \
> imx6q-b650v3.dtb \
> + imx6q-b850v3.dtb \
> imx6q-cm-fx6.dtb \
> imx6q-cubox-i.dtb \
> imx6q-dfi-fs700-m60.dtb \
> diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
> new file mode 100644
> index 0000000..318ba65
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-b850v3.dts
> @@ -0,0 +1,157 @@
> +/*
> + * Copyright 2015 Timesys Corporation.
> + * Copyright 2015 General Electric Company
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This file is distributed in the hope that it will be useful
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6q-bx50v3.dtsi"
> +
> +/ {
> + model = "General Electric B850v3";
> + compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
> +
> + chosen {
> + stdout-path = &uart3;
> + };
> +
> + panel_lvds0 {
Hyphen please.
> + compatible = "auo,b133htn01";
> + backlight = <&backlight_lvds>;
> + ddc-i2c-bus = <&mux_i2c12>;
> +
> + port {
> + panel_in_lvds0: endpoint {
> + remote-endpoint = <&lvds0_out>;
> + };
> + };
> + };
> +};
> +
> +&ldb {
> + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
> + <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
> + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
> + <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
> + fsl,dual-channel;
> + status = "okay";
> +
> + lvds0: lvds-channel@0 {
> + fsl,data-mapping = "spwg";
> + fsl,data-width = <24>;
> + status = "okay";
> +
> + port@4 {
> + reg = <4>;
> +
> + lvds0_out: endpoint {
> + remote-endpoint = <&panel_in_lvds0>;
> + };
> + };
> + };
> +};
> +
> +&i2c2 {
> + pca9547_ddc: mux@70 {
> + compatible = "nxp,pca9547";
> + reg = <0x70>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + mux_i2c11: i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0>;
> + };
> +
> + mux_i2c12: i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x1>;
> + };
> +
> + mux_i2c13: i2c@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x2>;
> + };
> +
> + mux_i2c14: i2c@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x3>;
> + };
> +
> + mux_i2c15: i2c@4 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x4>;
> + };
> +
> + mux_i2c16: i2c@5 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x5>;
> + };
> +
> + mux_i2c17: i2c@6 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x6>;
> + };
> +
> + mux_i2c18: i2c@7 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x7>;
> + };
> + };
> +};
> +
> +&hdmi {
> + ddc-i2c-bus = <&mux_i2c11>;
> +};
> +
> +&mux_i2c3 {
> + ads7830_2: ads7830@4a {
What's the point to get this node labelled? Where is ads7830_1?
Shawn
> + compatible = "ti,ads7830";
> + reg = <0x4a>;
> + };
> +};
> --
> 2.6.3
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
