[PATCH V5 5/5] regulator: max77620: add regulator driver for max77620/max20024

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




MAXIM Semiconductor's PMIC, MAX77620 and MAX20024 have the
multiple DCDC and LDOs. This supplies the power to different
components of the system.
Also these rails has configuration for ramp time, flexible
power sequence, slew rate etc.

Add regulator driver to access these rails via regulator APIs.

Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx>
Signed-off-by: Mallikarjun Kasoju <mkasoju@xxxxxxxxxx>
---
Changes from V1:
- Cleanup code based on comment received on mfd/rtc.
- Avoid duplication on error message.

Changes form V2:
- Run coccicheck and checkpatch in strict mode for the alignment.
- Refactor Regulator driver to use core API for DT parsing.
- Update based on API changes.

Changes from V3: 
- Change all sys initcall to module driver.
- change the max77620_read argument to unisgned int from u8.

Changes from V4: 
- Added DT binding document as devicetree/bindings/regulator/regulator-max77620.txt
- Detail out properties.

 .../bindings/regulator/regulator-max77620.txt      | 163 ++++
 drivers/regulator/Kconfig                          |   9 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/max77620-regulator.c             | 844 +++++++++++++++++++++
 4 files changed, 1017 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/regulator-max77620.txt
 create mode 100644 drivers/regulator/max77620-regulator.c

diff --git a/Documentation/devicetree/bindings/regulator/regulator-max77620.txt b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt
new file mode 100644
index 0000000..230f885
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/regulator-max77620.txt
@@ -0,0 +1,163 @@
+Regulator DT binding for MAX77620 Power management IC from Maxim Semiconductor.
+
+Device has multiple DCDC(sd[0-3] and LDOs(ldo[0-8]). The details of regulator
+properties are defined under the sub node "regulators" of parent node.
+
+Please refer file <Documentation/devicetree/bindings/regulator/regulator.txt>
+for common regulator bindings used by client.
+
+Following are properties of regulator subnode.
+
+Optional properties:
+-------------------
+The input supply of regulators are the optional properties on the
+regulator node. The input supply of these regulators are provided
+through following properties:
+in-sd0-supply: Input supply for SD0, INA-SD0 or INB-SD0 pins.
+in-sd1-supply: Input supply for SD1.
+in-sd2-supply: Input supply for SD2.
+in-sd3-supply: Input supply for SD3.
+in-ldo0-1-supply: Input supply for LDO0 and LDO1.
+in-ldo2-supply: Input supply for LDO2.
+in-ldo3-5-supply: Input supply for LDO3 and LDO5
+in-ldo4-6-supply: Input supply for LDO4 and LDO6.
+in-ldo7-8-supply: Input supply for LDO7 and LDO8.
+
+
+Optional sub nodes for regulators:
+---------------------------------
+The subnodes name is the name of regulator and it must be one of:
+	sd[0-3], ldo[0-8]
+
+Each sub-node should contain the constraints and initialization
+information for that regulator. The definition for each of these
+nodes is defined using the standard binding for regulators found at
+<Documentation/devicetree/bindings/regulator/regulator.txt>.
+
+Theres is also additional properties for SD/LDOs.
+The properties are required to configure SDs/LDOs FPS parameters
+when system is in "active" state or in "suspend" state.
+Here "active" state means system is UP and working normally.
+"suspend" state means system enters into the suspend state.
+
+- maxim,active-fps-source:	     FPS source for the gpios in active state
+				     of the GPIO. Valid values are FPS_SRC_0,
+				     FPS_SRC_1, FPS_SRC_2 and FPS_SRC_NONE.
+				     Absence of this property will leave the pin
+				     on default.
+- maxim,active-fps-power-up-slot:    Power up slot on given FPS for active state.
+				     Valid values are 0 to 7.
+- maxim,active-fps-power-down-slot:  Power down slot on given FPS for active
+				     state. Valid values are 0 to 7.
+- maxim,suspend-fps-source:	     Suspend state FPS source. Valid values are
+				     same as maxim,active-fps-source.
+- maxim,suspend-fps-power-down-slot: Suspend state power down slot. Valid
+				     values are 0 to 7.
+- maxim,suspend-fps-power-up-slot:   Suspend state power up slot. Valid values
+				     are 0 to 7.
+- maxim,disable-active-discharge:    boolean, Disable active discharge.
+
+Example:
+--------
+#include <dt-bindings/mfd/max77620.h>
+...
+max77620@3c {
+	regulators {
+		in-ldo0-1-supply = <&max77620_sd2>;
+		in-ldo7-8-supply = <&max77620_sd2>;
+
+		sd0 {
+			regulator-name = "vdd-core";
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-boot-on;
+			regulator-always-on;
+			maxim,active-fps-source = <FPS_SRC_1>;
+		};
+
+		sd1 {
+			regulator-name = "vddio-ddr";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+			regulator-boot-on;
+			maxim,active-fps-source = <FPS_SRC_0>;
+		};
+
+		sd2 {
+			regulator-name = "vdd-pre-reg";
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		sd3 {
+			regulator-name = "vdd-1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo0 {
+			regulator-name = "avdd-sys";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo1 {
+			regulator-name = "vdd-pex";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		ldo2 {
+			regulator-name = "vddio-sdmmc3";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		ldo3 {
+			regulator-name = "vdd-cam-hv";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		ldo4 {
+			regulator-name = "vdd-rtc";
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo5 {
+			regulator-name = "avdd-ts-hv";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		ldo6 {
+			regulator-name = "vdd-ts";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo7 {
+			regulator-name = "vdd-gen-pll-edp";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		ldo8 {
+			regulator-name = "vdd-hdmi-dp";
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+	};
+};
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8155e80..b92214b 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -343,6 +343,15 @@ config REGULATOR_MAX1586
 	  regulator via I2C bus. The provided regulator is suitable
 	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
 
+config REGULATOR_MAX77620
+	tristate "Maxim 77620/MAX20024 voltage regulator"
+	depends on MFD_MAX77620
+	help
+	  This driver controls Maxim MAX77620 voltage output regulator
+	  via I2C bus. The provided regulator is suitable for Tegra
+	  chip to control Step-Down DC-DC and LDOs. Say Y here to
+	  enable the regulator driver.
+
 config REGULATOR_MAX8649
 	tristate "Maxim 8649 voltage regulator"
 	depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 980b194..2564c00 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
 obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
 obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o
 obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
+obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8649)	+= max8649.o
 obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
 obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o
diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c
new file mode 100644
index 0000000..a15ca6b
--- /dev/null
+++ b/drivers/regulator/max77620-regulator.c
@@ -0,0 +1,844 @@
+/*
+ * Maxim MAX77620 Regulator driver
+ *
+ * Copyright (c) 2016, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author: Mallikarjun Kasoju <mkasoju@xxxxxxxxxx>
+ *	Laxman Dewangan <ldewangan@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/max77620.h>
+
+#define max77620_rails(_name)	"max77620-"#_name
+
+/* Power Mode */
+#define MAX77620_POWER_MODE_NORMAL		3
+#define MAX77620_POWER_MODE_LPM			2
+#define MAX77620_POWER_MODE_GLPM		1
+#define MAX77620_POWER_MODE_DISABLE		0
+
+/* SD Slew Rate */
+#define MAX77620_SD_SR_13_75			0
+#define MAX77620_SD_SR_27_5			1
+#define MAX77620_SD_SR_55			2
+#define MAX77620_SD_SR_100			3
+
+#define MAX77620_FPS_SRC_NUM			3
+
+struct max77620_regulator_info {
+	u8 type;
+	u32 min_uV;
+	u32 max_uV;
+	u32 step_uV;
+	u8 fps_addr;
+	u8 volt_addr;
+	u8 cfg_addr;
+	u8 volt_mask;
+	u8 power_mode_mask;
+	u8 power_mode_shift;
+	u8 remote_sense_addr;
+	u8 remote_sense_mask;
+	struct regulator_desc desc;
+};
+
+struct max77620_regulator_pdata {
+	bool sd_fsrade_disable;
+	struct regulator_init_data *reg_idata;
+	int active_fps_src;
+	int active_fps_pd_slot;
+	int active_fps_pu_slot;
+	int suspend_fps_src;
+	int suspend_fps_pd_slot;
+	int suspend_fps_pu_slot;
+	int current_mode;
+};
+
+struct max77620_regulator {
+	struct device *dev;
+	struct max77620_chip *max77620_chip;
+	struct max77620_regulator_info *rinfo[MAX77620_NUM_REGS];
+	struct max77620_regulator_pdata reg_pdata[MAX77620_NUM_REGS];
+	struct regulator_desc *rdesc[MAX77620_NUM_REGS];
+	int enable_power_mode[MAX77620_NUM_REGS];
+	int current_power_mode[MAX77620_NUM_REGS];
+	int active_fps_src[MAX77620_NUM_REGS];
+};
+
+#define fps_src_name(fps_src)	\
+	(fps_src == FPS_SRC_0 ? "FPS_SRC_0" :	\
+	fps_src == FPS_SRC_1 ? "FPS_SRC_1" :	\
+	fps_src == FPS_SRC_2 ? "FPS_SRC_2" : "FPS_SRC_NONE")
+
+static int max77620_regulator_get_fps_src(struct max77620_regulator *pmic,
+					  int id)
+{
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	struct device *parent = pmic->max77620_chip->dev;
+	unsigned int val;
+	int ret;
+
+	ret = max77620_reg_read(parent, rinfo->fps_addr, &val);
+	if (ret < 0) {
+		dev_err(pmic->dev, "Reg 0x%02x read failed %d\n",
+			rinfo->fps_addr, ret);
+		return ret;
+	}
+
+	return (val & MAX77620_FPS_SRC_MASK) >> MAX77620_FPS_SRC_SHIFT;
+}
+
+static int max77620_regulator_set_fps_src(struct max77620_regulator *pmic,
+					  int fps_src, int id)
+{
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	struct device *parent = pmic->max77620_chip->dev;
+	unsigned int val;
+	int ret;
+
+	switch (fps_src) {
+	case FPS_SRC_0:
+	case FPS_SRC_1:
+	case FPS_SRC_2:
+	case FPS_SRC_NONE:
+		break;
+
+	case FPS_SRC_DEF:
+		ret = max77620_reg_read(parent, rinfo->fps_addr, &val);
+		if (ret < 0) {
+			dev_err(pmic->dev, "Reg 0x%02x read failed %d\n",
+				rinfo->fps_addr, ret);
+			return ret;
+		}
+		ret = (val & MAX77620_FPS_SRC_MASK) >> MAX77620_FPS_SRC_SHIFT;
+		pmic->active_fps_src[id] = ret;
+		return 0;
+
+	default:
+		dev_err(pmic->dev, "Invalid FPS %d for regulator %d\n",
+			fps_src, id);
+		return -EINVAL;
+	}
+
+	ret = max77620_reg_update(parent, rinfo->fps_addr,
+				  MAX77620_FPS_SRC_MASK,
+				  fps_src << MAX77620_FPS_SRC_SHIFT);
+	if (ret < 0) {
+		dev_err(pmic->dev, "Reg 0x%02x update failed %d\n",
+			rinfo->fps_addr, ret);
+		return ret;
+	}
+	pmic->active_fps_src[id] = fps_src;
+
+	return 0;
+}
+
+static int max77620_regulator_set_fps_slots(struct max77620_regulator *pmic,
+					    int id, bool is_suspend)
+{
+	struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	struct device *parent = pmic->max77620_chip->dev;
+	unsigned int val = 0;
+	unsigned int mask = 0;
+	int pu = rpdata->active_fps_pu_slot;
+	int pd = rpdata->active_fps_pd_slot;
+	int ret = 0;
+
+	if (is_suspend) {
+		pu = rpdata->suspend_fps_pu_slot;
+		pd = rpdata->suspend_fps_pd_slot;
+	}
+
+	/* FPS power up period setting */
+	if (pu >= 0) {
+		val |= (pu << MAX77620_FPS_PU_PERIOD_SHIFT);
+		mask |= MAX77620_FPS_PU_PERIOD_MASK;
+	}
+
+	/* FPS power down period setting */
+	if (pd >= 0) {
+		val |= (pd << MAX77620_FPS_PD_PERIOD_SHIFT);
+		mask |= MAX77620_FPS_PD_PERIOD_MASK;
+	}
+
+	if (mask) {
+		ret = max77620_reg_update(parent, rinfo->fps_addr, mask, val);
+		if (ret < 0) {
+			dev_err(pmic->dev, "Reg 0x%02x update failed: %d\n",
+				rinfo->fps_addr, ret);
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+static int max77620_regulator_set_power_mode(struct max77620_regulator *pmic,
+					     int power_mode, int id)
+{
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	struct device *parent = pmic->max77620_chip->dev;
+	u8 mask = rinfo->power_mode_mask;
+	u8 shift = rinfo->power_mode_shift;
+	u8 addr;
+	int ret;
+
+	switch (rinfo->type) {
+	case MAX77620_REGULATOR_TYPE_SD:
+		addr = rinfo->cfg_addr;
+		break;
+	default:
+		addr = rinfo->volt_addr;
+		break;
+	}
+
+	ret = max77620_reg_update(parent, addr, mask, power_mode << shift);
+	if (ret < 0) {
+		dev_err(pmic->dev, "Regulator %d mode set failed: %d\n",
+			id, ret);
+		return ret;
+	}
+	pmic->current_power_mode[id] = power_mode;
+
+	return ret;
+}
+
+static int max77620_regulator_get_power_mode(struct max77620_regulator *pmic,
+					     int id)
+{
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	struct device *parent = pmic->max77620_chip->dev;
+	unsigned int val, addr;
+	u8 mask = rinfo->power_mode_mask;
+	u8 shift = rinfo->power_mode_shift;
+	int ret;
+
+	switch (rinfo->type) {
+	case MAX77620_REGULATOR_TYPE_SD:
+		addr = rinfo->cfg_addr;
+		break;
+	default:
+		addr = rinfo->volt_addr;
+		break;
+	}
+
+	ret = max77620_reg_read(parent, addr, &val);
+	if (ret < 0) {
+		dev_err(pmic->dev, "Regulator %d: Reg 0x%02x read failed: %d\n",
+			id, addr, ret);
+		return ret;
+	}
+
+	return (val & mask) >> shift;
+}
+
+static int max77620_read_slew_rate(struct max77620_regulator *pmic, int id)
+{
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	struct device *parent = pmic->max77620_chip->dev;
+	unsigned int rval;
+	int slew_rate;
+	int ret;
+
+	switch (rinfo->type) {
+	case MAX77620_REGULATOR_TYPE_SD:
+		ret = max77620_reg_read(parent, rinfo->cfg_addr, &rval);
+		if (ret < 0) {
+			dev_err(pmic->dev, "Register 0x%02x read failed: %d\n",
+				rinfo->cfg_addr, ret);
+			return ret;
+		}
+
+		slew_rate = (rval >> MAX77620_SD_SR_SHIFT) & 0x3;
+		switch (slew_rate) {
+		case 0:
+			slew_rate = 13750;
+			break;
+		case 1:
+			slew_rate = 27500;
+			break;
+		case 2:
+			slew_rate = 55000;
+			break;
+		case 3:
+			slew_rate = 100000;
+			break;
+		}
+		rinfo->desc.ramp_delay = slew_rate;
+		break;
+	default:
+		ret = max77620_reg_read(parent, rinfo->cfg_addr, &rval);
+		if (ret < 0) {
+			dev_err(pmic->dev, "Register 0x%02x read failed: %d\n",
+				rinfo->cfg_addr, ret);
+			return ret;
+		}
+		slew_rate = rval & 0x1;
+		switch (slew_rate) {
+		case 0:
+			slew_rate = 100000;
+			break;
+		case 1:
+			slew_rate = 5000;
+			break;
+		}
+		rinfo->desc.ramp_delay = slew_rate;
+		break;
+	}
+
+	return 0;
+}
+
+static int max77620_init_sd_fs_trade(struct max77620_regulator *pmic, int id)
+{
+	struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	struct device *parent = pmic->max77620_chip->dev;
+	u8 val;
+	int ret;
+
+	val = (rpdata->sd_fsrade_disable) ? MAX77620_SD_FSRADE_MASK : 0;
+	ret = max77620_reg_update(parent, rinfo->cfg_addr,
+				  MAX77620_SD_FSRADE_MASK, val);
+	if (ret < 0)
+		dev_err(pmic->dev, "Reg 0x%02x update failed: %d\n",
+			rinfo->cfg_addr, ret);
+
+	return ret;
+}
+
+static int max77620_init_pmic(struct max77620_regulator *pmic, int id)
+{
+	struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	int ret;
+
+	/* Initialise sd_fstrade */
+	if (rinfo->type == MAX77620_REGULATOR_TYPE_SD) {
+		ret = max77620_init_sd_fs_trade(pmic, id);
+		if (ret < 0)
+			return ret;
+	}
+
+	/* Update power mode */
+	ret = max77620_regulator_get_power_mode(pmic, id);
+	if (ret < 0)
+		return ret;
+
+	pmic->current_power_mode[id] = ret;
+	pmic->enable_power_mode[id] = MAX77620_POWER_MODE_NORMAL;
+
+	if (rpdata->active_fps_src == FPS_SRC_DEF) {
+		ret = max77620_regulator_get_fps_src(pmic, id);
+		if (ret < 0)
+			return ret;
+		rpdata->active_fps_src = ret;
+	}
+
+	 /* If rails are externally control of FPS then enable it always. */
+	if (rpdata->active_fps_src == FPS_SRC_NONE) {
+		ret = max77620_regulator_set_power_mode(pmic,
+					pmic->enable_power_mode[id],
+					id);
+		if (ret < 0)
+			return ret;
+	} else {
+		if (pmic->current_power_mode[id] !=
+		     pmic->enable_power_mode[id]) {
+			ret = max77620_regulator_set_power_mode(pmic,
+					pmic->enable_power_mode[id],
+					id);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	ret = max77620_regulator_set_fps_src(pmic, rpdata->active_fps_src, id);
+	if (ret < 0)
+		return ret;
+
+	ret = max77620_regulator_set_fps_slots(pmic, id, false);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int max77620_regulator_enable(struct regulator_dev *rdev)
+{
+	struct max77620_regulator *pmic = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+
+	if (pmic->active_fps_src[id] != FPS_SRC_NONE)
+		return 0;
+
+	return max77620_regulator_set_power_mode(pmic,
+			pmic->enable_power_mode[id], id);
+}
+
+static int max77620_regulator_disable(struct regulator_dev *rdev)
+{
+	struct max77620_regulator *pmic = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+
+	if (pmic->active_fps_src[id] != FPS_SRC_NONE)
+		return 0;
+
+	return max77620_regulator_set_power_mode(pmic,
+			MAX77620_POWER_MODE_DISABLE, id);
+}
+
+static int max77620_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	struct max77620_regulator *pmic = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+	int ret = 1;
+
+	if (pmic->active_fps_src[id] != FPS_SRC_NONE)
+		return 1;
+
+	ret = max77620_regulator_get_power_mode(pmic, id);
+	if (ret < 0)
+		return ret;
+
+	if (ret != MAX77620_POWER_MODE_DISABLE)
+		return 1;
+
+	return 0;
+}
+
+static int max77620_regulator_set_mode(struct regulator_dev *rdev,
+				       unsigned int mode)
+{
+	struct max77620_regulator *pmic = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[id];
+	struct device *parent = pmic->max77620_chip->dev;
+	bool fpwm = false;
+	int power_mode;
+	int ret;
+	u8 val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		fpwm = true;
+		power_mode = MAX77620_POWER_MODE_NORMAL;
+		break;
+
+	case REGULATOR_MODE_NORMAL:
+		power_mode = MAX77620_POWER_MODE_NORMAL;
+		break;
+
+	case REGULATOR_MODE_IDLE:
+		power_mode = MAX77620_POWER_MODE_LPM;
+		break;
+
+	default:
+		dev_err(pmic->dev, "Regulator %d mode %d is invalid\n",
+			id, mode);
+		return -EINVAL;
+	}
+
+	if (rinfo->type != MAX77620_REGULATOR_TYPE_SD)
+		goto skip_fpwm;
+
+	val = (fpwm) ? MAX77620_SD_FPWM_MASK : 0;
+	ret = max77620_reg_update(parent, rinfo->cfg_addr,
+				  MAX77620_SD_FPWM_MASK, val);
+	if (ret < 0) {
+		dev_err(pmic->dev, "Reg 0x%02x update failed: %d\n",
+			rinfo->cfg_addr, ret);
+		return ret;
+	}
+	rpdata->current_mode = mode;
+
+skip_fpwm:
+	ret = max77620_regulator_set_power_mode(pmic, power_mode, id);
+	if (ret < 0)
+		return ret;
+
+	pmic->enable_power_mode[id] = power_mode;
+
+	return 0;
+}
+
+static unsigned int max77620_regulator_get_mode(struct regulator_dev *rdev)
+{
+	struct max77620_regulator *pmic = rdev_get_drvdata(rdev);
+	struct device *parent = pmic->max77620_chip->dev;
+	int id = rdev_get_id(rdev);
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	int fpwm = 0;
+	int ret;
+	int pm_mode, reg_mode;
+	unsigned int val;
+
+	ret = max77620_regulator_get_power_mode(pmic, id);
+	if (ret < 0)
+		return 0;
+
+	pm_mode = ret;
+
+	if (rinfo->type == MAX77620_REGULATOR_TYPE_SD) {
+		ret = max77620_reg_read(parent, rinfo->cfg_addr, &val);
+		if (ret < 0) {
+			dev_err(pmic->dev, "Reg 0x%02x read failed: %d\n",
+				rinfo->cfg_addr, ret);
+			return ret;
+		}
+		fpwm = !!(val & MAX77620_SD_FPWM_MASK);
+	}
+
+	switch (pm_mode) {
+	case MAX77620_POWER_MODE_NORMAL:
+	case MAX77620_POWER_MODE_DISABLE:
+		if (fpwm)
+			reg_mode = REGULATOR_MODE_FAST;
+		else
+			reg_mode = REGULATOR_MODE_NORMAL;
+		break;
+	case MAX77620_POWER_MODE_LPM:
+	case MAX77620_POWER_MODE_GLPM:
+		reg_mode = REGULATOR_MODE_IDLE;
+		break;
+	default:
+		return 0;
+	}
+
+	return reg_mode;
+}
+
+static int max77620_regulator_set_ramp_delay(struct regulator_dev *rdev,
+					     int ramp_delay)
+{
+	struct max77620_regulator *pmic = rdev_get_drvdata(rdev);
+	int id = rdev_get_id(rdev);
+	struct max77620_regulator_info *rinfo = pmic->rinfo[id];
+	struct device *parent = pmic->max77620_chip->dev;
+	int ret, val;
+	u8 mask;
+
+	if (rinfo->type == MAX77620_REGULATOR_TYPE_SD) {
+		if (ramp_delay <= 13750)
+			val = 0;
+		else if (ramp_delay <= 27500)
+			val = 1;
+		else if (ramp_delay <= 55000)
+			val = 2;
+		else
+			val = 3;
+		val <<= MAX77620_SD_SR_SHIFT;
+		mask = MAX77620_SD_SR_MASK;
+	} else {
+		if (ramp_delay <= 5000)
+			val = 1;
+		else
+			val = 0;
+		mask = MAX77620_LDO_SLEW_RATE_MASK;
+	}
+
+	ret = max77620_reg_update(parent, rinfo->cfg_addr, mask, val);
+	if (ret < 0)
+		dev_err(pmic->dev, "Reg 0x%02x update failed: %d\n",
+			rinfo->cfg_addr, ret);
+
+	return ret;
+}
+
+static int max77620_of_parse_cb(struct device_node *np,
+				const struct regulator_desc *desc,
+				struct regulator_config *config)
+{
+	struct max77620_regulator *pmic = config->driver_data;
+	struct max77620_regulator_pdata *rpdata = &pmic->reg_pdata[desc->id];
+	u32 pval;
+	int ret;
+
+	rpdata->sd_fsrade_disable = of_property_read_bool(np,
+				"maxim,disable-active-discharge");
+
+	ret = of_property_read_u32(np, "maxim,active-fps-source", &pval);
+	rpdata->active_fps_src = (!ret) ? pval : FPS_SRC_DEF;
+
+	ret = of_property_read_u32(np, "maxim,active-fps-power-up-slot", &pval);
+	rpdata->active_fps_pu_slot = (!ret) ? pval : -1;
+
+	ret = of_property_read_u32(
+			np, "maxim,active-fps-power-down-slot", &pval);
+	rpdata->active_fps_pd_slot = (!ret) ? pval : -1;
+
+	ret = of_property_read_u32(np, "maxim,suspend-fps-source", &pval);
+	rpdata->suspend_fps_src = (!ret) ? pval : -1;
+
+	ret = of_property_read_u32(
+			np, "maxim,suspend-fps-power-up-slot", &pval);
+	rpdata->suspend_fps_pu_slot = (!ret) ? pval : -1;
+
+	ret = of_property_read_u32(
+			np, "maxim,suspend-fps-power-down-slot", &pval);
+	rpdata->suspend_fps_pd_slot = (!ret) ? pval : -1;
+
+	return max77620_init_pmic(pmic, desc->id);
+}
+
+static struct regulator_ops max77620_regulator_ops = {
+	.is_enabled = max77620_regulator_is_enabled,
+	.enable = max77620_regulator_enable,
+	.disable = max77620_regulator_disable,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.set_mode = max77620_regulator_set_mode,
+	.get_mode = max77620_regulator_get_mode,
+	.set_ramp_delay = max77620_regulator_set_ramp_delay,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+#define MAX77620_SD_CNF2_ROVS_EN_NONE	0
+#define RAIL_SD(_id, _name, _sname, _volt_mask, _min_uV, _max_uV,	\
+		_step_uV, _rs_add, _rs_mask)				\
+	[MAX77620_REGULATOR_ID_##_id] = {				\
+		.type = MAX77620_REGULATOR_TYPE_SD,			\
+		.volt_mask = MAX77620_##_volt_mask##_VOLT_MASK,		\
+		.volt_addr = MAX77620_REG_##_id,			\
+		.cfg_addr = MAX77620_REG_##_id##_CFG,			\
+		.fps_addr = MAX77620_REG_FPS_##_id,			\
+		.remote_sense_addr = _rs_add,				\
+		.remote_sense_mask = MAX77620_SD_CNF2_ROVS_EN_##_rs_mask, \
+		.min_uV = _min_uV,					\
+		.max_uV = _max_uV,					\
+		.step_uV = _step_uV,					\
+		.power_mode_mask = MAX77620_SD_POWER_MODE_MASK,		\
+		.power_mode_shift = MAX77620_SD_POWER_MODE_SHIFT,	\
+		.desc = {						\
+			.name = max77620_rails(_name),			\
+			.of_match = of_match_ptr(#_name),		\
+			.regulators_node = of_match_ptr("regulators"),	\
+			.of_parse_cb = max77620_of_parse_cb,		\
+			.supply_name = _sname,				\
+			.id = MAX77620_REGULATOR_ID_##_id,		\
+			.ops = &max77620_regulator_ops,			\
+			.n_voltages = ((_max_uV - _min_uV) / _step_uV) + 1, \
+			.min_uV = _min_uV,				\
+			.uV_step = _step_uV,				\
+			.enable_time = 500,				\
+			.vsel_mask = MAX77620_##_volt_mask##_VOLT_MASK,	\
+			.vsel_reg = MAX77620_REG_##_id,			\
+			.type = REGULATOR_VOLTAGE,			\
+		},							\
+	}
+
+#define RAIL_LDO(_id, _name, _sname, _type, _min_uV, _max_uV, _step_uV) \
+	[MAX77620_REGULATOR_ID_##_id] = {				\
+		.type = MAX77620_REGULATOR_TYPE_LDO_##_type,		\
+		.volt_mask = MAX77620_LDO_VOLT_MASK,			\
+		.volt_addr = MAX77620_REG_##_id##_CFG,			\
+		.cfg_addr = MAX77620_REG_##_id##_CFG2,			\
+		.fps_addr = MAX77620_REG_FPS_##_id,			\
+		.remote_sense_addr = 0xFF,				\
+		.min_uV = _min_uV,					\
+		.max_uV = _max_uV,					\
+		.step_uV = _step_uV,					\
+		.power_mode_mask = MAX77620_LDO_POWER_MODE_MASK,	\
+		.power_mode_shift = MAX77620_LDO_POWER_MODE_SHIFT,	\
+		.desc = {						\
+			.name = max77620_rails(_name),			\
+			.of_match = of_match_ptr(#_name),		\
+			.regulators_node = of_match_ptr("regulators"),	\
+			.of_parse_cb = max77620_of_parse_cb,		\
+			.supply_name = _sname,				\
+			.id = MAX77620_REGULATOR_ID_##_id,		\
+			.ops = &max77620_regulator_ops,			\
+			.n_voltages = ((_max_uV - _min_uV) / _step_uV) + 1, \
+			.min_uV = _min_uV,				\
+			.uV_step = _step_uV,				\
+			.enable_time = 500,				\
+			.vsel_mask = MAX77620_LDO_VOLT_MASK,		\
+			.vsel_reg = MAX77620_REG_##_id##_CFG,		\
+			.type = REGULATOR_VOLTAGE,			\
+		},							\
+	}
+
+static struct max77620_regulator_info max77620_regs_info[MAX77620_NUM_REGS] = {
+	RAIL_SD(SD0, sd0, "in-sd0", SD0, 600000, 1400000, 12500, 0x22, SD0),
+	RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 1550000, 12500, 0x22, SD1),
+	RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+	RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+	RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+
+	RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000),
+	RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000),
+	RAIL_LDO(LDO2, ldo2, "in-ldo2",   P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO3, ldo3, "in-ldo3-5", P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500),
+	RAIL_LDO(LDO5, ldo5, "in-ldo3-5", P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO7, ldo7, "in-ldo7-8", N, 800000, 3950000, 50000),
+	RAIL_LDO(LDO8, ldo8, "in-ldo7-8", N, 800000, 3950000, 50000),
+};
+
+static struct max77620_regulator_info max20024_regs_info[MAX77620_NUM_REGS] = {
+	RAIL_SD(SD0, sd0, "in-sd0", SD0, 800000, 1587500, 12500, 0x22, SD0),
+	RAIL_SD(SD1, sd1, "in-sd1", SD1, 600000, 3387500, 12500, 0x22, SD1),
+	RAIL_SD(SD2, sd2, "in-sd2", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+	RAIL_SD(SD3, sd3, "in-sd3", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+	RAIL_SD(SD4, sd4, "in-sd4", SDX, 600000, 3787500, 12500, 0xFF, NONE),
+
+	RAIL_LDO(LDO0, ldo0, "in-ldo0-1", N, 800000, 2375000, 25000),
+	RAIL_LDO(LDO1, ldo1, "in-ldo0-1", N, 800000, 2375000, 25000),
+	RAIL_LDO(LDO2, ldo2, "in-ldo2",   P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO3, ldo3, "in-ldo3-5", P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO4, ldo4, "in-ldo4-6", P, 800000, 1587500, 12500),
+	RAIL_LDO(LDO5, ldo5, "in-ldo3-5", P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO6, ldo6, "in-ldo4-6", P, 800000, 3950000, 50000),
+	RAIL_LDO(LDO7, ldo7, "in-ldo7-8", N, 800000, 3950000, 50000),
+	RAIL_LDO(LDO8, ldo8, "in-ldo7-8", N, 800000, 3950000, 50000),
+};
+
+static int max77620_regulator_probe(struct platform_device *pdev)
+{
+	struct max77620_chip *max77620_chip = dev_get_drvdata(pdev->dev.parent);
+	struct max77620_regulator_info *regulator_info;
+	struct device *dev = &pdev->dev;
+	struct regulator_config config = { };
+	struct max77620_regulator *pmic;
+	int ret = 0;
+	int id;
+
+	pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
+	if (!pmic)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pmic);
+	pmic->max77620_chip = max77620_chip;
+	pmic->dev = dev;
+	if (!dev->of_node)
+		dev->of_node = pdev->dev.parent->of_node;
+
+	regulator_info = (max77620_chip->id == MAX77620) ? max77620_regs_info :
+				max20024_regs_info;
+
+	config.regmap = max77620_chip->rmap;
+	config.dev = dev;
+	config.driver_data = pmic;
+
+	for (id = 0; id < MAX77620_NUM_REGS; ++id) {
+		struct regulator_dev *rdev;
+		struct regulator_desc *rdesc;
+
+		if ((max77620_chip->id == MAX77620) &&
+		    (id == MAX77620_REGULATOR_ID_SD4))
+			continue;
+
+		rdesc = &regulator_info[id].desc;
+		pmic->rinfo[id] = &max77620_regs_info[id];
+		pmic->enable_power_mode[id] = MAX77620_POWER_MODE_NORMAL;
+		pmic->rdesc[id] = rdesc;
+
+		ret = max77620_read_slew_rate(pmic, id);
+		if (ret < 0)
+			return ret;
+
+		rdev = devm_regulator_register(dev, rdesc, &config);
+		if (IS_ERR(rdev)) {
+			ret = PTR_ERR(rdev);
+			dev_err(dev, "Regulator registration %s failed: %d\n",
+				rdesc->name, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int max77620_regulator_suspend(struct device *dev)
+{
+	struct max77620_regulator *pmic = dev_get_drvdata(dev);
+	struct max77620_regulator_pdata *reg_pdata;
+	struct max77620_regulator_info *rinfo;
+	int id;
+
+	for (id = 0; id < MAX77620_NUM_REGS; ++id) {
+		reg_pdata = &pmic->reg_pdata[id];
+		rinfo = pmic->rinfo[id];
+
+		max77620_regulator_set_fps_slots(pmic, id, true);
+		if (reg_pdata->suspend_fps_src < 0)
+			continue;
+
+		max77620_regulator_set_fps_src(pmic, reg_pdata->suspend_fps_src,
+					       id);
+	}
+
+	return 0;
+}
+
+static int max77620_regulator_resume(struct device *dev)
+{
+	struct max77620_regulator *pmic = dev_get_drvdata(dev);
+	struct max77620_regulator_pdata *reg_pdata;
+	struct max77620_regulator_info *rinfo;
+	int id;
+
+	for (id = 0; id < MAX77620_NUM_REGS; ++id) {
+		reg_pdata = &pmic->reg_pdata[id];
+		rinfo = pmic->rinfo[id];
+
+		max77620_regulator_set_fps_slots(pmic, id, false);
+		if (reg_pdata->active_fps_src < 0)
+			continue;
+		max77620_regulator_set_fps_src(pmic, reg_pdata->active_fps_src,
+					       id);
+	}
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops max77620_regulator_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(max77620_regulator_suspend,
+				max77620_regulator_resume)
+};
+
+static const struct platform_device_id max77620_regulator_devtype[] = {
+	{ .name = "max77620-pmic", },
+	{ .name = "max20024-pmic", },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, max77620_regulator_devtype);
+
+static struct platform_driver max77620_regulator_driver = {
+	.probe = max77620_regulator_probe,
+	.id_table = max77620_regulator_devtype,
+	.driver = {
+		.name = "max77620-pmic",
+		.pm = &max77620_regulator_pm_ops,
+	},
+};
+
+module_platform_driver(max77620_regulator_driver);
+
+MODULE_DESCRIPTION("MAX77620/MAX20024 regulator driver");
+MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@xxxxxxxxxx>");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@xxxxxxxxxx>");
+MODULE_ALIAS("platform:max77620-pmic");
+MODULE_LICENSE("GPL v2");
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux