RE: [PATCH v7 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Lee,

Thank you for your review.


> -----Original Message-----
> From: Lee Jones [mailto:lee.jones@xxxxxxxxxx]
> Sent: 2016年1月25日 20:50
> To: Yang, Wenyou <Wenyou.Yang@xxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>; Pawel Moll <pawel.moll@xxxxxxx>;
> Mark Rutland <mark.rutland@xxxxxxx>; Ian Campbell
> <ijc+devicetree@xxxxxxxxxxxxxx>; Kumar Gala <galak@xxxxxxxxxxxxxx>; Javier
> Martinez Canillas <javier@xxxxxxxxxxxx>; Krzysztof Kozlowski
> <k.kozlowski@xxxxxxxxxxx>; Peter Korsgaard <jacmet@xxxxxxxxx>; Ferre,
> Nicolas <Nicolas.FERRE@xxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v7 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC
> MFD driver
> 
> On Fri, 22 Jan 2016, Wenyou Yang wrote:
> 
> > This patch adds support for the Active-semi ACT8945A PMIC.
> > It is a Multi Function Device with the following subdevices:
> >  - Regulator
> >  - Charger
> >
> > It is interfaced to the host controller using I2C interface, ACT8945A
> > is a child device of the I2C.
> >
> > Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx>
> > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
> > ---
> >
> > Changes in v7:
> >  - remove struct act8945a_dev to .c file.
> >  - remove unused .h file.
> >
> > Changes in v6:
> >  - change MFD_ACT8945A type from bool to tristate.
> >  - revert depends on to 'I2C'.
> >
> > Changes in v5:
> >  - change depends on to 'I2C=y'.
> >
> > Changes in v4:
> >  - add a space before .compatible.
> >  - collect Reviewed-by from Krzysztof Kozlowski.
> >
> > Changes in v3: None
> > Changes in v2:
> >  - add more help information in Kconfig.
> >  - update the file header with short version license and author line.
> >  - remove unused structure members (dev, i2c_client) of stuct act8945a_dev.
> >  - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'.
> >  - use more explicit info to indicate the failure to add sub devices.
> >  - remove the unnecessary print out.
> >  - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2").
> >
> >  drivers/mfd/Kconfig    |   11 +++++
> >  drivers/mfd/Makefile   |    1 +
> >  drivers/mfd/act8945a.c |  112
> > ++++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 124 insertions(+)
> >  create mode 100644 drivers/mfd/act8945a.c
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index
> > 9ca66de..5038e78 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -18,6 +18,17 @@ config MFD_CS5535
> >  	  This is the core driver for CS5535/CS5536 MFD functions.  This is
> >            necessary for using the board's GPIO and MFGPT functionality.
> >
> > +config MFD_ACT8945A
> > +	tristate "Active-semi ACT8945A"
> > +	select MFD_CORE
> > +	select REGMAP_I2C
> > +	depends on I2C && OF
> > +	help
> > +	  Support for the ACT8945A PMIC from Active-semi. This device
> > +	  features three step-down DC/DC converters and four low-dropout
> > +	  linear regulators, along with a complete ActivePath battery
> > +	  charger.
> > +
> >  config MFD_AS3711
> >  	bool "AMS AS3711"
> >  	select MFD_CORE
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index
> > 0f230a6..2f1ca82 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -6,6 +6,7 @@
> >  obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x.o
> >  obj-$(CONFIG_MFD_88PM800)	+= 88pm800.o 88pm80x.o
> >  obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
> > +obj-$(CONFIG_MFD_ACT8945A)	+= act8945a.o
> >  obj-$(CONFIG_MFD_SM501)		+= sm501.o
> >  obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
> >  obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
> > diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c new file
> > mode 100644 index 0000000..d2e01941
> > --- /dev/null
> > +++ b/drivers/mfd/act8945a.c
> > @@ -0,0 +1,112 @@
> > +/*
> > + * MFD driver for Active-semi ACT8945a PMIC
> > + *
> > + * Copyright (C) 2015 Atmel Corporation.
> > + *
> > + * Author: Wenyou Yang <wenyou.yang@xxxxxxxxx>
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify it
> > + * under  the terms of the GNU General  Public License as published
> > +by the
> > + * Free Software Foundation;  either version 2 of the License, or (at
> > +your
> > + * option) any later version.
> > + */
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/regmap.h>
> > +
> > +struct act8945a_dev {
> > +	struct regmap *regmap;
> > +};
> > +
> > +static const struct mfd_cell act8945a_devs[] = {
> > +	{
> > +		.name = "act8945a-pmic",
> 
> I think this should be -regulator, rather than -pmic.

Yes, -regulator is better.

> 
> I believe *this* is the PMIC driver.
> 
> > +		.of_compatible = "active-semi,act8945a-regulator",
> > +	},
> > +	{
> > +		.name = "act8945a-charger",
> > +		.of_compatible = "active-semi,act8945a-charger",
> > +	},
> > +};
> > +
> > +static const struct regmap_config act8945a_regmap_config = {
> > +	.reg_bits = 8,
> > +	.val_bits = 8,
> > +};
> > +
> > +static int act8945a_i2c_probe(struct i2c_client *i2c,
> > +			      const struct i2c_device_id *id) {
> > +	struct act8945a_dev *act8945a;
> > +	int ret;
> > +
> > +	act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL);
> > +	if (!act8945a)
> > +		return -ENOMEM;
> > +
> > +	i2c_set_clientdata(i2c, act8945a);
> > +
> > +	act8945a->regmap = devm_regmap_init_i2c(i2c,
> &act8945a_regmap_config);
> > +	if (IS_ERR(act8945a->regmap)) {
> > +		ret = PTR_ERR(act8945a->regmap);
> > +		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
> > +		return ret;
> > +	}
> 
> Is the Regmap used in both the charger AND regulator drivers?

Yes, used in both drivers. 

The regmap is got through dev_get_regmap(pdev->dev.parent, NULL).

> 
> > +	ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
> act8945a_devs,
> > +			      ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
> > +	if (ret) {
> > +		dev_err(&i2c->dev, "Failed to add sub devices\n");
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int act8945a_i2c_remove(struct i2c_client *i2c) {
> > +	mfd_remove_devices(&i2c->dev);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct i2c_device_id act8945a_i2c_id[] = {
> > +	{ "act8945a", 0 },
> > +	{}
> > +};
> > +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
> > +
> > +static const struct of_device_id act8945a_of_match[] = {
> > +	{ .compatible = "active-semi,act8945a", },
> > +	{},
> > +};
> > +MODULE_DEVICE_TABLE(of, act8945a_of_match);
> > +
> > +static struct i2c_driver act8945a_i2c_driver = {
> > +	.driver = {
> > +		   .name = "act8945a",
> > +		   .of_match_table = of_match_ptr(act8945a_of_match),
> > +	},
> > +	.probe = act8945a_i2c_probe,
> > +	.remove = act8945a_i2c_remove,
> > +	.id_table = act8945a_i2c_id,
> > +};
> > +
> > +static int __init act8945a_i2c_init(void) {
> > +	return i2c_add_driver(&act8945a_i2c_driver);
> > +}
> > +subsys_initcall(act8945a_i2c_init);
> > +
> > +static void __exit act8945a_i2c_exit(void) {
> > +	i2c_del_driver(&act8945a_i2c_driver);
> > +}
> > +module_exit(act8945a_i2c_exit);
> > +
> > +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
> > +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@xxxxxxxxx>");
> > +MODULE_LICENSE("GPL");
> 
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source
> software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog


Best Regards,
Wenyou Yang
��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux