On Sat, 23 Jan 2016 23:17:18 +0300
Antony Pavlov <antonynpavlov@xxxxxxxxx> wrote:
> TODO: get pll registers base address from devicetree node
>
> Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx>
> Cc: Alban Bedel <albeu@xxxxxxx>
> Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
> Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: linux-clk@xxxxxxxxxxxxxxx
> Cc: linux-mips@xxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-ath79.c | 193 ++++++++++++++++++++++++++++++++++
> include/dt-bindings/clock/ath79-clk.h | 22 ++++
> 3 files changed, 216 insertions(+)
>
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 820714c..5101763 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -18,6 +18,7 @@ endif
> # hardware specific clock types
> # please keep this section sorted lexicographically by file/directory path name
> obj-$(CONFIG_MACH_ASM9260) += clk-asm9260.o
> +obj-$(CONFIG_ATH79) += clk-ath79.o
> obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
> obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o
> obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
> diff --git a/drivers/clk/clk-ath79.c b/drivers/clk/clk-ath79.c
> new file mode 100644
> index 0000000..75338a7
> --- /dev/null
> +++ b/drivers/clk/clk-ath79.c
> @@ -0,0 +1,193 @@
> +/*
> + * Clock driver for Atheros AR724X/AR913X/AR933X SoCs
> + *
> + * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@xxxxxxxxxxx>
> + * Copyright (C) 2011 Gabor Juhos <juhosg@xxxxxxxxxxx>
> + * Copyright (C) 2015 Alban Bedel <albeu@xxxxxxx>
> + * Copyright (C) 2016 Antony Pavlov <antonynpavlov@xxxxxxxxx>
> + *
> + * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include "clk.h"
> +
> +#include <dt-bindings/clock/ath79-clk.h>
> +
> +#include "asm/mach-ath79/ar71xx_regs.h"
> +#include "asm/mach-ath79/ath79.h"
> +
> +#define MHZ (1000 * 1000)
> +
> +#define AR724X_BASE_FREQ (40 * MHZ)
> +
> +static struct clk *ath79_clks[ATH79_CLK_END];
> +
> +static struct clk_onecell_data clk_data = {
> + .clks = ath79_clks,
> + .clk_num = ARRAY_SIZE(ath79_clks),
> +};
> +
> +static struct clk *__init ath79_add_sys_clkdev(
> + const char *id, unsigned long rate)
> +{
> + struct clk *clk;
> + int err;
> +
> + clk = clk_register_fixed_rate(NULL, id, NULL, CLK_IS_ROOT, rate);
> + if (!clk)
> + panic("failed to allocate %s clock structure", id);
> +
> + err = clk_register_clkdev(clk, id, NULL);
> + if (err)
> + panic("unable to register %s clock device", id);
> +
> + return clk;
> +}
>
> +static void __init ar724x_clk_init(struct device_node *np)
> +{
> + struct clk *ref_clk;
> + unsigned long of_ref_rate;
> + unsigned long ref_rate;
> + unsigned long cpu_rate;
> + unsigned long ddr_rate;
> + unsigned long ahb_rate;
> + u32 pll;
> + u32 freq;
> + u32 div;
> +
> + ref_clk = of_clk_get(np, 0);
> + if (IS_ERR(ref_clk)) {
> + pr_err("%s: of_clk_get failed\n", np->full_name);
> + return;
> + }
It would be better to have this function take the ref clock as
argument, to allow using it for both OF and legacy platforms.
> + of_ref_rate = clk_get_rate(ref_clk);
> +
> + ref_rate = AR724X_BASE_FREQ;
> +
> + if (of_ref_rate != ref_rate) {
> + pr_err("ref_rate != of_ref_rate\n");
> + ref_rate = of_ref_rate;
> + }
I don't think that this test is really useful.
> + pll = ath79_pll_rr(AR724X_PLL_REG_CPU_CONFIG);
> +
> + div = ((pll >> AR724X_PLL_FB_SHIFT) & AR724X_PLL_FB_MASK);
> + freq = div * ref_rate;
> +
> + div = ((pll >> AR724X_PLL_REF_DIV_SHIFT) & AR724X_PLL_REF_DIV_MASK) * 2;
> + freq /= div;
> +
> + cpu_rate = freq;
> +
> + div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
> + ddr_rate = freq / div;
> +
> + div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
> + ahb_rate = cpu_rate / div;
For a new driver it would make sense to use clk_register_divider() and
similar generic building blocks.
> + ath79_clks[ATH79_CLK_REF] = ath79_add_sys_clkdev("ref", ref_rate);
> + ath79_clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
> + ath79_clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
> + ath79_clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
> + ath79_clks[ATH79_CLK_WDT] = ath79_add_sys_clkdev("wdt", ahb_rate);
> + ath79_clks[ATH79_CLK_UART] = ath79_add_sys_clkdev("uart", ahb_rate);
You shouldn't add ref, wdt and uart, they are not needed and make the
driver incompatible with the current DT bindings.
> + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
> +}
> +
> +static void __init ar933x_clk_init(struct device_node *np)
> +{
> + struct clk *ref_clk;
> + unsigned long of_ref_rate;
> + unsigned long ref_rate;
> + unsigned long cpu_rate;
> + unsigned long ddr_rate;
> + unsigned long ahb_rate;
> + u32 clock_ctrl;
> + u32 cpu_config;
> + u32 freq;
> + u32 t;
> +
> + ref_clk = of_clk_get(np, 0);
> + if (IS_ERR(ref_clk)) {
> + pr_err("%s: of_clk_get failed\n", np->full_name);
> + return;
> + }
> +
> + of_ref_rate = clk_get_rate(ref_clk);
> +
> + t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
> + if (t & AR933X_BOOTSTRAP_REF_CLK_40)
> + ref_rate = 40 * MHZ;
> + else
> + ref_rate = 25 * MHZ;
> +
> + if (ref_rate != of_ref_rate) {
> + pr_err("ref_rate != of_ref_rate\n");
> + ref_rate = of_ref_rate;
> + }
> +
> + clock_ctrl = ath79_pll_rr(AR933X_PLL_CLOCK_CTRL_REG);
> + if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
> + cpu_rate = ref_rate;
> + ahb_rate = ref_rate;
> + ddr_rate = ref_rate;
> + } else {
> + cpu_config = ath79_pll_rr(AR933X_PLL_CPU_CONFIG_REG);
> +
> + t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
> + AR933X_PLL_CPU_CONFIG_REFDIV_MASK;
> + freq = ref_rate / t;
> +
> + t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
> + AR933X_PLL_CPU_CONFIG_NINT_MASK;
> + freq *= t;
> +
> + t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
> + AR933X_PLL_CPU_CONFIG_OUTDIV_MASK;
> + if (t == 0)
> + t = 1;
> +
> + freq >>= t;
> +
> + t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) &
> + AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1;
> + cpu_rate = freq / t;
> +
> + t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) &
> + AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1;
> + ddr_rate = freq / t;
> +
> + t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) &
> + AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
> + ahb_rate = freq / t;
> + }
> +
> + ath79_clks[ATH79_CLK_REF] = ath79_add_sys_clkdev("ref", ref_rate);
> + ath79_clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
> + ath79_clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
> + ath79_clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
> + ath79_clks[ATH79_CLK_WDT] = ath79_add_sys_clkdev("wdt", ahb_rate);
> + ath79_clks[ATH79_CLK_UART] = ath79_add_sys_clkdev("uart", ref_rate);
> +
> + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
> +}
> +CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ar724x_clk_init);
> +CLK_OF_DECLARE(ar933x_clk, "qca,ar9330-pll", ar933x_clk_init);
> diff --git a/include/dt-bindings/clock/ath79-clk.h b/include/dt-bindings/clock/ath79-clk.h
> new file mode 100644
> index 0000000..1c6fb04
> --- /dev/null
> +++ b/include/dt-bindings/clock/ath79-clk.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright (C) 2014, 2016 Antony Pavlov <antonynpavlov@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __DT_BINDINGS_ATH79_CLK_H
> +#define __DT_BINDINGS_ATH79_CLK_H
> +
> +#define ATH79_CLK_REF 0
> +#define ATH79_CLK_CPU 1
> +#define ATH79_CLK_DDR 2
> +#define ATH79_CLK_AHB 3
> +#define ATH79_CLK_WDT 4
> +#define ATH79_CLK_UART 5
> +
> +#define ATH79_CLK_END 6
> +
> +#endif /* __DT_BINDINGS_ATH79_CLK_H */
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
