On Thursday 21 January 2016 11:15:24 Peter Chen wrote:
>
> Just adding from device driver view and change the name from "roohub" to
> "port".
>
> It is the port number (1-9), but not the root hub number.
>
> At the most of embedded platforms, we have only one port per controller.
> For example, at the non-hub boards, if there are two Standard-A ports,
> there are from two different USB controllers.
> But for Alan's case, it has six ports, and all from the one USB controller,
> port 1 to port 6 are from the HS root hub, port 7 to port 9 are from the SS
> root hub.
>
> For the single port controller platform, the dts will be like below, port_1 is
> under the HS root hub, port_2 is under the SS root hub.
>
> &usb1 {
> port_1: nxp@1 {
> compatible = "usb15a2,007d";
> reg = <0x01>;
>
> hub: genesys@1 {
> compatible = "usb05e3,0608";
> reg = <0x01>;
> };
> };
>
> port_2: nxp@2 {
> compatible = "usb15a2,007d";
> reg = <0x02>;
>
> hub: genesys@1 {
> compatible = "usb05e3,0608";
> reg = <0x01>;
> };
> };
> };
But why are you modeling ports of the root hub as hubs themselves?
I would expect the example above to look like
&usb1 {
hub@1 {
compatible = "usb05e3,0608";
reg = <0x01>;
};
hub@2 {
compatible = "usb05e3,0608";
reg = <0x01>;
};
};
So two hubs at ports 1 and 2 of the USB controller that integrates
the root hub and shares a device node with it.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
