Now that mvneta driver allows to have more than one clock defined, update the clocks property and document the clock-names property. Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxxx> --- Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index aeea50c..f85b93b 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -6,12 +6,16 @@ Required properties: - interrupts: interrupt for the device - phy: See ethernet.txt file in the same directory. - phy-mode: See ethernet.txt file in the same directory -- clocks: a pointer to the reference clock for this device. +- clocks: Array of clocks required for this device; requires at least one + for CORE clock. Optional properties: - tx-csum-limit: maximum mtu supported by port that allow TX checksum. Value is presented in bytes. If not used, by default 1600B is set for "marvell,armada-370-neta" and 9800B for others. +- clock-names: Array of names corresponding to clocks property; shall be + "core" for CORE clock and "axi" for optional AXI clock. + Example: -- 2.7.0.rc3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
