From: HS Liao <hs.liao@xxxxxxxxxxxx> This adds documentation for the MediaTek Global Command Engine (GCE) unit found in MT8173 SoCs. Signed-off-by: HS Liao <hs.liao@xxxxxxxxxxxx> --- .../devicetree/bindings/soc/mediatek/gce.txt | 33 ++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/mediatek/gce.txt diff --git a/Documentation/devicetree/bindings/soc/mediatek/gce.txt b/Documentation/devicetree/bindings/soc/mediatek/gce.txt new file mode 100644 index 0000000..878b11e --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/gce.txt @@ -0,0 +1,33 @@ +MediaTek GCE +=============== + +The Global Command Engine (GCE) is used to help read/write registers with +critical time limitation, such as updating display configuration during the +vblank. The GCE can be used to implement the Command Queue (CMDQ) driver. +Currently, the GCE only supports display related hardwares, but we expect +it can be extended to other hardwares for future requirements. + +Required properties: +- compatible: Must be "mediatek,mt8173-gce" +- reg: Address range of the GCE unit +- interrupts: The interrupt signal from the GCE block +- clock: Clocks according to the common clock binding +- clock-names: Must be "gce" to stand for GCE clock + +Example: + + gce: gce@10212000 { + compatible = "mediatek,mt8173-gce"; + reg = <0 0x10212000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_GCE>; + clock-names = "gce"; + }; + + mmsys: clock-controller@14000000 { + compatible = "mediatek,mt8173-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + #clock-cells = <1>; + mediatek,gce = <&gce>; + }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html