Hi Russell,
Thanks for your comments :-D
On 01/19/2016 01:15 AM, Russell King - ARM Linux wrote:
Hi,
Some comments below...
On Mon, Jan 18, 2016 at 10:42:20PM +0800, Yakir Yang wrote:
+static int inno_hdmi_config_video_avi(struct inno_hdmi *hdmi)
+{
+ char info[HDMI_SIZE_AVI_INFOFRAME] = {0};
+ int avi_color_mode;
+ int i;
+
+ hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_BUF_INDEX, INFOFRAME_AVI);
+
+ info[0] = 0x82;
+ info[1] = 0x02;
+ info[2] = 0x0D;
+ info[3] = info[0] + info[1] + info[2];
+
+ if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_RGB)
+ avi_color_mode = AVI_COLOR_MODE_RGB;
+ else if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_YUV444)
+ avi_color_mode = AVI_COLOR_MODE_YCBCR444;
+ else if (hdmi->hdmi_data.enc_out_format == HDMI_COLORSPACE_YUV422)
+ avi_color_mode = AVI_COLOR_MODE_YCBCR422;
+ else
+ avi_color_mode = AVI_COLOR_MODE_RGB;
+
+ info[4] = (avi_color_mode << 5);
+ info[5] = (AVI_COLORIMETRY_NO_DATA << 6) |
+ (AVI_CODED_FRAME_ASPECT_NO_DATA << 4) |
+ ACTIVE_ASPECT_RATE_SAME_AS_CODED_FRAME;
+
+ info[6] = 0;
+ info[7] = hdmi->hdmi_data.vic;
+
+ if (hdmi->hdmi_data.vic == 6 || hdmi->hdmi_data.vic == 7 ||
+ hdmi->hdmi_data.vic == 21 || hdmi->hdmi_data.vic == 22)
+ info[8] = 1;
+ else
+ info[8] = 0;
+
+ /* Calculate avi info frame checKsum */
+ for (i = 4; i < HDMI_SIZE_AVI_INFOFRAME; i++)
+ info[3] += info[i];
+ info[3] = 0x100 - info[3];
+
+ for (i = 0; i < HDMI_SIZE_AVI_INFOFRAME; i++)
+ hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_ADDR + i, info[i]);
+
+ return 0;
Is there a reason why the helpers in drivers/video/hdmi.c can't be used
to generate this?
hdmi_avi_infoframe_init / hdmi_avi_infoframe_pack and
drm_hdmi_avi_infoframe_from_display_mode ?
Great, thanks for point out, it would make code much clean with those
helper functions.
+}
+
+static int inno_hdmi_config_video_vsi(struct inno_hdmi *hdmi)
+{
+ char info[HDMI_SIZE_VSI_INFOFRAME] = {0};
+ int i;
+
+ hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, m_PACKET_VSI_EN,
+ v_PACKET_VSI_EN(0));
+
+ hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_BUF_INDEX, INFOFRAME_VSI);
+
+ /* Header Bytes */
+ info[0] = 0x81;
+ info[1] = 0x01;
+
+ /* PB1 - PB3 contain the 24bit IEEE Registration Identifier */
+ info[4] = 0x03;
+ info[5] = 0x0c;
+ info[6] = 0x00;
+
+ /* PB4 - HDMI_Video_Format into bits 7:5 */
+ info[7] = 0;
+
+ /*
+ * PB5 - Depending on the video format, this byte will contain
+ * either the HDMI_VIC code in buts 7:0, OR the 3D_Structure in
+ * bits 7:4.
+ */
+ info[2] = 0x06 - 2;
+ info[8] = 0;
+ info[9] = 0;
+
+ info[3] = info[0] + info[1] + info[2];
+
+ /* Calculate info frame checKsum */
+ for (i = 4; i < HDMI_SIZE_VSI_INFOFRAME; i++)
+ info[3] += info[i];
+ info[3] = 0x100 - info[3];
+
+ for (i = 0; i < HDMI_SIZE_VSI_INFOFRAME; i++)
+ hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_ADDR + i, info[i]);
+
+ hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, m_PACKET_VSI_EN,
+ v_PACKET_VSI_EN(1));
+
+ return 0;
hdmi_vendor_infoframe_init / hdmi_vendor_infoframe_pack?
You can probably use the same function to upload the control packet
too - something like:
static int inno_hdmi_upload_frame(struct inno_hdmi *hdmi, int setup_rc,
union hdmi_infoframe *frame, u32 mask, u32 disable, u32 enable)
{
if (mask)
hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, mask, disable);
if (setup_rc >= 0) {
u8 packed_frame[YOUR_MAXIMUM_INFO_FRAME_SIZE];
ssize_t rc, i;
rc = hdmi_infoframe_pack(frame, packed_frame,
sizeof(packed_frame));
if (rc < 0)
return rc;
for (i = 0; i < rc; i++)
hdmi_writeb(hdmi, HDMI_CONTROL_PACKET_ADDR + i, buf[i]);
if (mask)
hdmi_modb(hdmi, HDMI_PACKET_SEND_AUTO, mask, enable);
}
return setup_rc;
}
static int inno_hdmi_config_video_vsi(struct inno_hdmi *hdmi)
{
union hdmi_infoframe frame;
rc = drm_hdmi_vendor_infoframe_from_display_mode(&frame.vendor.hdmi,
the_drm_display_mode);
return inno_hdmi_upload_frame(hdmi, rc, &frame, m_PACKET_VSI_EN,
v_PACKET_VSI_EN(0), v_PACKET_VSI_EN(1));
}
Ah.... appreciate for the code, it's great suggest, thanks.
Also I found a mistaken with previous "inno_hdmi_config_video_vsi"
function that we don't need to send the HDMI vendor infoframes if
we are not using a 4K or stereoscopic 3D mode. :)
+static int inno_hdmi_i2c_wait(struct inno_hdmi *hdmi)
+{
+ struct inno_hdmi_i2c *i2c = hdmi->i2c;
+ int stat;
+
+ stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10);
+ if (!stat) {
+ stat = wait_for_completion_timeout(&i2c->cmp, HZ / 10);
+ if (!stat)
+ return -EAGAIN;
What's the reason for this double wait_for_completion? This probably
needs a comment, otherwise it looks like some weird cut-n-paste error.
Yep, you 're right, don't need double wait here.
+static int inno_hdmi_i2c_write(struct inno_hdmi *hdmi, struct i2c_msg *msgs)
+{
+ struct inno_hdmi_i2c *i2c = hdmi->i2c;
You seem to have a local i2c pointer...
Ah, got it ;)
+
+ /*
+ * The DDC module only support read EDID message, so
+ * we assume that each word write to this i2c adapter
+ * should be the offset of EDID word address.
+ */
+ if ((msgs->len != 1) ||
+ ((msgs->addr != DDC_ADDR) && (msgs->addr != DDC_SEGMENT_ADDR)))
+ return -EINVAL;
+
+ reinit_completion(&i2c->cmp);
+
+ if (msgs->addr == DDC_SEGMENT_ADDR)
+ hdmi->i2c->segment_addr = msgs->buf[0];
+ if (msgs->addr == DDC_ADDR)
+ hdmi->i2c->ddc_addr = msgs->buf[0];
+
+ /* Set edid fifo first addr */
+ hdmi_writeb(hdmi, HDMI_EDID_FIFO_OFFSET, 0x00);
+
+ /* Set edid word address 0x00/0x80 */
+ hdmi_writeb(hdmi, HDMI_EDID_WORD_ADDR, hdmi->i2c->ddc_addr);
+
+ /* Set edid segment pointer */
+ hdmi_writeb(hdmi, HDMI_EDID_SEGMENT_POINTER, hdmi->i2c->segment_addr);
but then you don't use it in the four locations above.
Thanks,
- Yakir
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
