Add DT bindings document for the Qualcomm NAND controller driver. Cc: devicetree@xxxxxxxxxxxxxxx Cc: Rob Herring <robh@xxxxxxxxxx> Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx> --- v6: - Update compatible tring to something more specific - Refer to nand.txt for standard properties - In the example, use 'partitions' node to hold the partition subnodes v5: - Make changes to incorporate chip select sub nodes (brcmnand taken as reference) v3: - Don't use '0x' when specifying nand controller address space - Add optional property for on-flash bbt usage .../devicetree/bindings/mtd/qcom_nandc.txt | 86 ++++++++++++++++++++++ 1 file changed, 86 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt new file mode 100644 index 0000000..70dd511 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt @@ -0,0 +1,86 @@ +* Qualcomm NAND controller + +Required properties: +- compatible: should be "qcom,ipq806x-nand" +- reg: MMIO address range +- clocks: must contain core clock and always on clock +- clock-names: must contain "core" for the core clock and "aon" for the + always on clock +- dmas: DMA specifier, consisting of a phandle to the ADM DMA + controller node and the channel number to be used for + NAND. Refer to dma.txt and qcom_adm.txt for more details +- dma-names: must be "rxtx" +- qcom,cmd-crci: must contain the ADM command type CRCI block instance + number specified for the NAND controller on the given + platform +- qcom,data-crci: must contain the ADM data type CRCI block instance + number specified for the NAND controller on the given + platform +- #address-cells: <1> - subnodes give the chip-select number +- #size-cells: <0> + +* NAND chip-select + +Each controller may contain one or more subnodes to represent enabled +chip-selects which (may) contain NAND flash chips. Their properties are as +follows. + +Required properties: +- compatible: should contain "qcom,nandcs" +- reg: a single integer representing the chip-select + number (e.g., 0, 1, 2, etc.) +- #address-cells: see partition.txt +- #size-cells: see partition.txt +- nand-ecc-strength: see nand.txt +- nand-ecc-step-size: must be 512. see nand.txt for more details. + +Optional properties: +- nand-bus-width: see nand.txt + +Each nandcs device node may optionally contain a 'partitions' sub-node, which +further contains sub-nodes describing the flash partition mapping. See +partition.txt for more detail. + +Example: + +nand@1ac00000 { + compatible = "qcom,ebi2-nandc"; + reg = <0x1ac00000 0x800>; + + clocks = <&gcc EBI2_CLK>, + <&gcc EBI2_AON_CLK>; + clock-names = "core", "aon"; + + dmas = <&adm_dma 3>; + dma-names = "rxtx"; + qcom,cmd-crci = <15>; + qcom,data-crci = <3>; + + #address-cells = <1>; + #size-cells = <0>; + + nandcs@0 { + compatible = "qcom,nandcs"; + reg = <0>; + + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot-nand"; + reg = <0 0x58a0000>; + }; + + partition@58a0000 { + label = "fs-nand"; + reg = <0x58a0000 0x4000000>; + }; + }; + }; +}; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html