On 14/01/16 15:38, Ludovic Desroches wrote: > Add the ADC device, and remove the adc_op_clk which is useless since the > adc sampling frequency is configured with sysfs. > > Signed-off-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx> I've now applied the driver to the togreg branch of iio.git. Should get a pull request out to Greg in about 2 weeks time and it'll probably be in linux-next a week after that. I'm assuming all the device tree changes will got through the at91 tree and arm-soc etc. Shout if you want me to take them through IIO. Thanks, Jonathan > --- > arch/arm/boot/dts/sama5d2.dtsi | 18 ++++++++++++------ > 1 file changed, 12 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi > index 3f750f6..46dd430 100644 > --- a/arch/arm/boot/dts/sama5d2.dtsi > +++ b/arch/arm/boot/dts/sama5d2.dtsi > @@ -88,12 +88,6 @@ > #clock-cells = <0>; > clock-frequency = <0>; > }; > - > - adc_op_clk: adc_op_clk{ > - compatible = "fixed-clock"; > - #clock-cells = <0>; > - clock-frequency = <1000000>; > - }; > }; > > ns_sram: sram@00200000 { > @@ -1085,6 +1079,18 @@ > status = "disabled"; > }; > > + adc: adc@fc030000 { > + compatible = "atmel,sama5d2-adc"; > + reg = <0xfc030000 0x100>; > + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&adc_clk>; > + clock-names = "adc_clk"; > + atmel,min-sample-rate-hz = <200000>; > + atmel,max-sample-rate-hz = <20000000>; > + atmel,startup-time-ms = <4>; > + status = "disabled"; > + }; > + > pioA: pinctrl@fc038000 { > compatible = "atmel,sama5d2-pinctrl"; > reg = <0xfc038000 0x600>; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html