The current vdd_arm voltage is too low, increase it will make the system more stable. Signed-off-by: Andy Yan <andy.yan@xxxxxxxxxxxxxx> --- Changes in v2: - move the opp table to rk3066a.dtsi, make it as the default opp table for rk3066a based board. arch/arm/boot/dts/rk3066a.dtsi | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 946f187..ff0530e 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -61,11 +61,13 @@ reg = <0x0>; operating-points = < /* kHz uV */ - 1008000 1075000 - 816000 1025000 - 600000 1025000 - 504000 1000000 - 312000 975000 + 1416000 1300000 + 1200000 1175000 + 1008000 1125000 + 816000 1125000 + 600000 1100000 + 504000 1100000 + 312000 1075000 >; clock-latency = <40000>; clocks = <&cru ARMCLK>; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
