As the SAMA5D2 controller supports the 32-bit ECC strength, accept it
as a valid setting when required by the device tree or the NAND
parameter page.
Then configure the controller to use this new setting.
Signed-off-by: Romain Izard <romain.izard.pro@xxxxxxxxx>
For the binding:
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
v2: Split message rewording and binding rewording into their own patches
Documentation/devicetree/bindings/mtd/atmel-nand.txt | 3 ++-
drivers/mtd/nand/atmel_nand.c | 19 +++++++++++++++++--
drivers/mtd/nand/atmel_nand_ecc.h | 1 +
3 files changed, 20 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index e1887b7d7e53..d53aba98fbc9 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -27,7 +27,8 @@ Optional properties:
- atmel,has-pmecc : boolean to enable Programmable Multibit ECC hardware,
capable of BCH encoding and decoding, on devices where it is present.
- atmel,pmecc-cap : error correct capability for Programmable Multibit ECC
- Controller. Supported values are: 2, 4, 8, 12, 24.
+ Controller. Supported values are: 2, 4, 8, 12, 24. If the compatible string
+ is "atmel,sama5d2-nand", 32 is also valid.
- atmel,pmecc-sector-size : sector size for ECC computation. Supported values
are: 512, 1024.
- atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index f73037a3b51d..3e580eea29a1 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -474,6 +474,7 @@ static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
* 8-bits 13-bytes 14-bytes
* 12-bits 20-bytes 21-bytes
* 24-bits 39-bytes 42-bytes
+ * 32-bits 52-bytes 56-bytes
*/
static int pmecc_get_ecc_bytes(int cap, int sector_size)
{
@@ -1023,6 +1024,9 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
case 24:
val = PMECC_CFG_BCH_ERR24;
break;
+ case 32:
+ val = PMECC_CFG_BCH_ERR32;
+ break;
}
if (host->pmecc_sector_size == 512)
@@ -1084,6 +1088,9 @@ static int pmecc_choose_ecc(struct atmel_nand_host *host,
/* If device tree doesn't specify, use NAND's minimum ECC parameters */
if (host->pmecc_corr_cap == 0) {
+ if (*cap > host->caps->pmecc_max_correction)
+ return -EINVAL;
+
/* use the most fitable ecc bits (the near bigger one ) */
if (*cap <= 2)
host->pmecc_corr_cap = 2;
@@ -1095,6 +1102,8 @@ static int pmecc_choose_ecc(struct atmel_nand_host *host,
host->pmecc_corr_cap = 12;
else if (*cap <= 24)
host->pmecc_corr_cap = 24;
+ else if (*cap <= 32)
+ host->pmecc_corr_cap = 32;
else
return -EINVAL;
}
@@ -1553,8 +1562,14 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
* them from NAND ONFI parameters.
*/
if (of_property_read_u32(np, "atmel,pmecc-cap", &val) == 0) {
- if ((val != 2) && (val != 4) && (val != 8) && (val != 12) &&
- (val != 24)) {
+ if (val > host->caps->pmecc_max_correction) {
+ dev_err(host->dev,
+ "Required ECC strength too high: %u max %u\n",
+ val, host->caps->pmecc_max_correction);
+ return -EINVAL;
+ }
+ if ((val != 2) && (val != 4) && (val != 8) &&
+ (val != 12) && (val != 24) && (val != 32)) {
dev_err(host->dev,
"Required ECC strength not supported: %u\n",
val);
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
index ec964c43c932..834d694487bd 100644
--- a/drivers/mtd/nand/atmel_nand_ecc.h
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -43,6 +43,7 @@
#define PMECC_CFG_BCH_ERR8 (2 << 0)
#define PMECC_CFG_BCH_ERR12 (3 << 0)
#define PMECC_CFG_BCH_ERR24 (4 << 0)
+#define PMECC_CFG_BCH_ERR32 (5 << 0)
#define PMECC_CFG_SECTOR512 (0 << 4)
#define PMECC_CFG_SECTOR1024 (1 << 4)
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
