On Wed, Jan 13, 2016 at 05:34:14PM +0100, Romain Izard wrote: > The NFC controller used to accelerate the NAND transfers on SAMA5 chips > can use either RB_EDGE0 or RB_EDGE3 as its ready/busy interrupt bit. > > Use the controller's compatible string to select the correct bit. > > Signed-off-by: Romain Izard <romain.izard.pro@xxxxxxxxx> > Reviewed-by: Wenyou Yang <Wenyou.yang@xxxxxxxxx> > --- > .../devicetree/bindings/mtd/atmel-nand.txt | 2 +- > drivers/mtd/nand/atmel_nand.c | 39 +++++++++++++++++----- > drivers/mtd/nand/atmel_nand_nfc.h | 5 ++- > 3 files changed, 36 insertions(+), 10 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt > index 7d4c8eb775a5..89b0db9801b0 100644 > --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt > +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt > @@ -34,7 +34,7 @@ Optional properties: > - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false > - Nand Flash Controller(NFC) is a slave driver under Atmel nand flash > - Required properties: > - - compatible : "atmel,sama5d3-nfc". > + - compatible : "atmel,sama5d3-nfc" or "atmel,sama5d4-nfc". > - reg : should specify the address and size used for NFC command registers, > NFC registers and NFC Sram. NFC Sram address and size can be absent > if don't want to use it. For the binding: Acked-by: Rob Herring <robh@xxxxxxxxxx> [...] > @@ -2352,6 +2360,12 @@ static int atmel_nand_nfc_probe(struct platform_device *pdev) > } > } > > + priv = of_match_device(atmel_nand_nfc_match, &pdev->dev)->data; Use of_device_get_match_data > + if (NULL == priv) > + return -ENODEV; > + > + nfc->rb_edge = priv->rb_edge; > + > nfc_writel(nfc->hsmc_regs, IDR, 0xffffffff); > nfc_readl(nfc->hsmc_regs, SR); /* clear the NFC_SR */ > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html