ZynMP SoC has a Gigabit Transceiver with four lanes.
All the high speed peripherals USB, SATA, PCIE, Display
Port and Ethernet SGMII rely on GT for PHY layer.
This patch adds driver for ZynqMP GT.
Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xxxxxxxxxx>
---
v2:
modified logic to use phy cells as 2
drivers/phy/phy-zynqmp.c | 843 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 843 insertions(+)
create mode 100644 drivers/phy/phy-zynqmp.c
diff --git a/drivers/phy/phy-zynqmp.c b/drivers/phy/phy-zynqmp.c
new file mode 100644
index 0000000..0b36bf4
--- /dev/null
+++ b/drivers/phy/phy-zynqmp.c
@@ -0,0 +1,843 @@
+/*
+ * phy-zynqmp.c - PHY driver for Xilinx ZynqMP GT.
+ *
+ * Copyright (C) 2015 - 2016 Xilinx Inc.
+ *
+ * Author: Subbaraya Sundeep <sbhatta@xxxxxxxxxx>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This driver is tested for USB and SATA currently.
+ * Other controllers PCIe, Display Port and SGMII should also
+ * work but that is experimental as of now.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/phy/phy.h>
+
+#define MAX_LANES 4
+
+#define RST_LPD 0x023C
+#define RST_FPD 0x0100
+
+#define SATA_RESET BIT(1)
+#define DP_RESET BIT(16)
+#define USB0_RESET (BIT(6) | BIT(8) | BIT(10))
+#define USB1_RESET (BIT(7) | BIT(9) | BIT(11))
+
+#define ICM_CFG0 0x10010
+#define ICM_CFG1 0x10014
+#define ICM_CFG0_L0_MASK 0x07
+#define ICM_CFG0_L1_MASK 0x70
+#define ICM_CFG1_L2_MASK 0x07
+#define ICM_CFG2_L3_MASK 0x70
+
+#define ICM_PROTOCOL_PD 0x0
+#define ICM_PROTOCOL_PCIE 0x1
+#define ICM_PROTOCOL_SATA 0x2
+#define ICM_PROTOCOL_USB 0x3
+#define ICM_PROTOCOL_DP 0x4
+#define ICM_PROTOCOL_SGMII 0x5
+
+#define PLL_REF_SEL0 0x10000
+#define PLL_REF_OFFSET 0x4
+#define PLL_FREQ_MASK 0x1F
+
+#define L0_PLL_STATUS_READ_1 0x23E4
+#define PLL_STATUS_READ_OFFSET 0x4000
+#define PLL_STATUS_LOCKED 0x10
+
+#define L0_PLL_SS_STEP_SIZE_0_LSB 0x2370
+#define L0_PLL_SS_STEP_SIZE_1 0x2374
+#define L0_PLL_SS_STEP_SIZE_2 0x2378
+#define L0_PLL_SS_STEP_SIZE_3_MSB 0x237C
+#define STEP_SIZE_OFFSET 0x4000
+#define STEP_SIZE_0_MASK 0xFF
+#define STEP_SIZE_1_MASK 0xFF
+#define STEP_SIZE_2_MASK 0xFF
+#define STEP_SIZE_3_MASK 0x3
+#define FORCE_STEP_SIZE 0x10
+#define FORCE_STEPS 0x20
+
+#define L0_PLL_SS_STEPS_0_LSB 0x2368
+#define L0_PLL_SS_STEPS_1_MSB 0x236C
+#define STEPS_OFFSET 0x4000
+#define STEPS_0_MASK 0xFF
+#define STEPS_1_MASK 0x07
+
+#define BGCAL_REF_SEL 0x10028
+#define BGCAL_REF_VALUE 0x0C
+
+#define L3_TM_CALIB_DIG19 0xEC4C
+#define L3_TM_CALIB_DIG19_NSW 0x07
+#define TM_OVERRIDE_NSW_CODE 0x02
+
+#define L3_CALIB_DONE_STATUS 0xEF14
+#define CALIB_DONE 0x02
+
+#define L0_TXPMA_ST_3 0x0B0C
+#define DN_CALIB_CODE 0x3F
+
+#define L3_TM_CALIB_DIG18 0xEC48
+#define L3_TM_CALIB_DIG18_NSW 0xE0
+#define NSW_SHIFT 5
+
+#define L0_TM_PLL_DIG_37 0x2094
+#define TM_PLL_DIG_37_OFFSET 0x4000
+#define TM_COARSE_CODE_LIMIT 0x10
+
+#define L0_TM_DIG_6 0x106C
+#define TM_DIG_6_OFFSET 0x4000
+#define TM_DISABLE_DESCRAMBLE_DECODER 0x0F
+
+#define L0_TX_DIG_61 0x00F4
+#define TX_DIG_61_OFFSET 0x4000
+#define TM_DISABLE_SCRAMBLE_ENCODER 0x0F
+
+#define SATA_CONTROL_OFFSET 0x0100
+
+#define CONTROLLERS_PER_LANE 5
+
+#define XPSGTR_TYPE_USB0 0 /* USB controller 0 */
+#define XPSGTR_TYPE_USB1 1 /* USB controller 1 */
+#define XPSGTR_TYPE_SATA_0 2 /* SATA controller lane 0 */
+#define XPSGTR_TYPE_SATA_1 3 /* SATA controller lane 1 */
+#define XPSGTR_TYPE_PCIE_0 4 /* PCIe controller lane 0 */
+#define XPSGTR_TYPE_PCIE_1 5 /* PCIe controller lane 1 */
+#define XPSGTR_TYPE_PCIE_2 6 /* PCIe controller lane 2 */
+#define XPSGTR_TYPE_PCIE_3 7 /* PCIe controller lane 3 */
+#define XPSGTR_TYPE_DP_0 8 /* Display Port controller lane 0 */
+#define XPSGTR_TYPE_DP_1 9 /* Display Port controller lane 1 */
+#define XPSGTR_TYPE_SGMII0 10 /* Ethernet SGMII controller 0 */
+#define XPSGTR_TYPE_SGMII1 11 /* Ethernet SGMII controller 1 */
+#define XPSGTR_TYPE_SGMII2 12 /* Ethernet SGMII controller 2 */
+#define XPSGTR_TYPE_SGMII3 13 /* Ethernet SGMII controller 3 */
+
+/*
+ * This table holds the valid combinations of controllers and
+ * lanes(Interconnect Matrix).
+ */
+static unsigned int icm_matrix[][CONTROLLERS_PER_LANE] = {
+ { XPSGTR_TYPE_PCIE_0, XPSGTR_TYPE_SATA_0, XPSGTR_TYPE_USB0,
+ XPSGTR_TYPE_DP_1, XPSGTR_TYPE_SGMII0 },
+ { XPSGTR_TYPE_PCIE_1, XPSGTR_TYPE_SATA_1, XPSGTR_TYPE_USB0,
+ XPSGTR_TYPE_DP_0, XPSGTR_TYPE_SGMII1 },
+ { XPSGTR_TYPE_PCIE_2, XPSGTR_TYPE_SATA_0, XPSGTR_TYPE_USB0,
+ XPSGTR_TYPE_DP_1, XPSGTR_TYPE_SGMII2 },
+ { XPSGTR_TYPE_PCIE_3, XPSGTR_TYPE_SATA_1, XPSGTR_TYPE_USB1,
+ XPSGTR_TYPE_DP_0, XPSGTR_TYPE_SGMII3 }
+};
+
+/* Allowed PLL reference clock frequencies */
+enum pll_frequencies {
+ REF_19_2M = 0,
+ REF_20M,
+ REF_24M,
+ REF_26M,
+ REF_27M,
+ REF_38_4M,
+ REF_40M,
+ REF_52M,
+ REF_100M,
+ REF_108M,
+ REF_125M,
+ REF_135M,
+ REF_150M,
+};
+
+/**
+ * struct xpsgtr_phy - representation of a lane
+ * @phy: pointer to the kernel PHY device
+ * @type: controller which uses this lane
+ * @lane: lane number
+ * @protocol: protocol in which the lane operates
+ * @ref_clk: enum of allowed ref clock rates for this lane PLL
+ * @pll_lock: PLL status
+ * @data: pointer to hold private data
+ * @refclk_rate: PLL reference clock frequency
+ */
+struct xpsgtr_phy {
+ struct phy *phy;
+ u8 type;
+ u8 lane;
+ u8 protocol;
+ enum pll_frequencies ref_clk;
+ bool pll_lock;
+ void *data;
+ u32 refclk_rate;
+};
+
+/**
+ * struct xpsgtr_ssc - structure to hold SSC settings for a lane
+ * @refclk_rate: PLL reference clock frequency
+ * @pll_ref_clk: value to be written to register for corresponding ref clk rate
+ * @steps: number of steps of SSC (Spread Spectrum Clock)
+ * @step_size: step size of each step
+ */
+struct xpsgtr_ssc {
+ u32 refclk_rate;
+ u8 pll_ref_clk;
+ u32 steps;
+ u32 step_size;
+};
+
+/* lookup table to hold all settings needed for a ref clock frequency */
+static struct xpsgtr_ssc ssc_lookup[] = {
+ {19200000, 0x05, 608, 264020},
+ {20000000, 0x06, 634, 243454},
+ {24000000, 0x07, 760, 168973},
+ {26000000, 0x08, 824, 143860},
+ {27000000, 0x09, 856, 86551},
+ {38400000, 0x0A, 1218, 65896},
+ {40000000, 0x0B, 634, 243454},
+ {52000000, 0x0C, 824, 143860},
+ {10000000, 0x0D, 1058, 87533},
+ {10800000, 0x0E, 856, 86551},
+ {12500000, 0x0F, 992, 119497},
+ {13500000, 0x10, 1070, 55393},
+ {15000000, 0x11, 792, 187091}
+};
+
+/**
+ * struct xpsgtr_dev - representation of a ZynMP GT device
+ * @dev: pointer to device
+ * @serdes: serdes base address
+ * @siou: siou base address
+ * @gtr_mutex: mutex for locking
+ * @phys: pointer to all the lanes
+ * @fpd: base address for full power domain devices reset control
+ * @lpd: base address for low power domain devices reset control
+ * @tx_term_fix: fix for GT issue
+ */
+struct xpsgtr_dev {
+ struct device *dev;
+ void __iomem *serdes;
+ void __iomem *siou;
+ struct mutex gtr_mutex;
+ struct xpsgtr_phy **phys;
+ void __iomem *fpd;
+ void __iomem *lpd;
+ bool tx_term_fix;
+};
+
+/**
+ * xpsgtr_configure_pll - configures SSC settings for a lane
+ * @gtr_phy: pointer to lane
+ */
+static void xpsgtr_configure_pll(struct xpsgtr_phy *gtr_phy)
+{
+ struct xpsgtr_dev *gtr_dev = gtr_phy->data;
+ u32 reg;
+ u32 offset;
+ u32 steps;
+ u32 size;
+ u8 pll_ref_clk;
+
+ steps = ssc_lookup[gtr_phy->ref_clk].steps;
+ size = ssc_lookup[gtr_phy->ref_clk].step_size;
+ pll_ref_clk = ssc_lookup[gtr_phy->ref_clk].pll_ref_clk;
+
+ offset = gtr_phy->lane * PLL_REF_OFFSET + PLL_REF_SEL0;
+ reg = readl(gtr_dev->serdes + offset);
+ reg = (reg & ~PLL_FREQ_MASK) | pll_ref_clk;
+ writel(reg, gtr_dev->serdes + offset);
+
+ /* SSC step size [7:0] */
+ offset = gtr_phy->lane * STEP_SIZE_OFFSET + L0_PLL_SS_STEP_SIZE_0_LSB;
+ reg = readl(gtr_dev->serdes + offset);
+ reg = (reg & ~STEP_SIZE_0_MASK) |
+ (size & STEP_SIZE_0_MASK);
+ writel(reg, gtr_dev->serdes + offset);
+
+ /* SSC step size [15:8] */
+ offset = gtr_phy->lane * STEP_SIZE_OFFSET + L0_PLL_SS_STEP_SIZE_1;
+ reg = readl(gtr_dev->serdes + offset);
+ reg = (reg & ~STEP_SIZE_1_MASK) |
+ (size & STEP_SIZE_1_MASK);
+ writel(reg, gtr_dev->serdes + offset);
+
+ /* SSC step size [23:16] */
+ offset = gtr_phy->lane * STEP_SIZE_OFFSET + L0_PLL_SS_STEP_SIZE_2;
+ reg = readl(gtr_dev->serdes + offset);
+ reg = (reg & ~STEP_SIZE_2_MASK) |
+ (size & STEP_SIZE_2_MASK);
+ writel(reg, gtr_dev->serdes + offset);
+
+ /* SSC steps [7:0] */
+ offset = gtr_phy->lane * STEPS_OFFSET + L0_PLL_SS_STEPS_0_LSB;
+ reg = readl(gtr_dev->serdes + offset);
+ reg = (reg & ~STEPS_0_MASK) |
+ (steps & STEPS_0_MASK);
+ writel(reg, gtr_dev->serdes + offset);
+
+ /* SSC steps [10:8] */
+ offset = gtr_phy->lane * STEPS_OFFSET + L0_PLL_SS_STEPS_1_MSB;
+ reg = readl(gtr_dev->serdes + offset);
+ reg = (reg & ~STEPS_1_MASK) |
+ (steps & STEPS_1_MASK);
+ writel(reg, gtr_dev->serdes + offset);
+
+ /* SSC step size [24:25] */
+ offset = gtr_phy->lane * STEP_SIZE_OFFSET + L0_PLL_SS_STEP_SIZE_3_MSB;
+ reg = readl(gtr_dev->serdes + offset);
+ reg = (reg & ~STEP_SIZE_3_MASK) |
+ (size & STEP_SIZE_3_MASK);
+ reg |= FORCE_STEP_SIZE | FORCE_STEPS;
+ writel(reg, gtr_dev->serdes + offset);
+}
+
+/**
+ * xpsgtr_lane_setprotocol - sets required protocol in ICM registers
+ * @gtr_phy: pointer to lane
+ */
+static void xpsgtr_lane_setprotocol(struct xpsgtr_phy *gtr_phy)
+{
+ struct xpsgtr_dev *gtr_dev = gtr_phy->data;
+ u32 reg;
+ u8 protocol = gtr_phy->protocol;
+
+ switch (gtr_phy->lane) {
+ case 0:
+ reg = readl(gtr_dev->serdes + ICM_CFG0);
+ reg = (reg & ~ICM_CFG0_L0_MASK) | protocol;
+ writel(reg, gtr_dev->serdes + ICM_CFG0);
+ break;
+ case 1:
+ reg = readl(gtr_dev->serdes + ICM_CFG0);
+ reg = (reg & ~ICM_CFG0_L1_MASK) | (protocol << 4);
+ writel(reg, gtr_dev->serdes + ICM_CFG0);
+ break;
+ case 2:
+ reg = readl(gtr_dev->serdes + ICM_CFG1);
+ reg = (reg & ~ICM_CFG0_L0_MASK) | protocol;
+ writel(reg, gtr_dev->serdes + ICM_CFG1);
+ break;
+ case 3:
+ reg = readl(gtr_dev->serdes + ICM_CFG1);
+ reg = (reg & ~ICM_CFG0_L1_MASK) | (protocol << 4);
+ writel(reg, gtr_dev->serdes + ICM_CFG1);
+ break;
+ default:
+ /* We already checked 0 <= lane <= 3 */
+ break;
+ }
+}
+
+/**
+ * xpsgtr_lane_setprotocol - configures SSC settings for a lane
+ * @gtr_phy: pointer to lane
+ */
+static void xpsgtr_configure_lane(struct xpsgtr_phy *gtr_phy)
+{
+ int i;
+
+ switch (gtr_phy->type) {
+ case XPSGTR_TYPE_USB0:
+ case XPSGTR_TYPE_USB1:
+ gtr_phy->protocol = ICM_PROTOCOL_USB;
+ gtr_phy->ref_clk = REF_26M;
+ break;
+ case XPSGTR_TYPE_SATA_0:
+ case XPSGTR_TYPE_SATA_1:
+ gtr_phy->protocol = ICM_PROTOCOL_SATA;
+ gtr_phy->ref_clk = REF_150M;
+ break;
+ case XPSGTR_TYPE_DP_0:
+ case XPSGTR_TYPE_DP_1:
+ gtr_phy->protocol = ICM_PROTOCOL_DP;
+ gtr_phy->ref_clk = REF_26M;
+ break;
+ case XPSGTR_TYPE_PCIE_0:
+ case XPSGTR_TYPE_PCIE_1:
+ case XPSGTR_TYPE_PCIE_2:
+ case XPSGTR_TYPE_PCIE_3:
+ gtr_phy->protocol = ICM_PROTOCOL_PCIE;
+ gtr_phy->ref_clk = REF_26M;
+ break;
+ case XPSGTR_TYPE_SGMII0:
+ case XPSGTR_TYPE_SGMII1:
+ case XPSGTR_TYPE_SGMII2:
+ case XPSGTR_TYPE_SGMII3:
+ gtr_phy->protocol = ICM_PROTOCOL_SGMII;
+ gtr_phy->ref_clk = REF_26M;
+ break;
+ default:
+ gtr_phy->protocol = ICM_PROTOCOL_PD;
+ gtr_phy->ref_clk = REF_26M;
+ break;
+ }
+
+ for (i = 0 ; i < ARRAY_SIZE(ssc_lookup); i++) {
+ if (gtr_phy->refclk_rate == ssc_lookup[i].refclk_rate)
+ gtr_phy->ref_clk = i;
+ }
+}
+
+/**
+ * xpsgtr_controller_reset - puts controller in reset
+ * @gtr_phy: pointer to lane
+ */
+static void xpsgtr_controller_reset(struct xpsgtr_phy *gtr_phy)
+{
+ struct xpsgtr_dev *gtr_dev = gtr_phy->data;
+ u32 reg;
+
+ switch (gtr_phy->type) {
+ case XPSGTR_TYPE_USB0:
+ reg = readl(gtr_dev->lpd + RST_LPD);
+ reg |= USB0_RESET;
+ writel(reg, gtr_dev->lpd + RST_LPD);
+ break;
+ case XPSGTR_TYPE_USB1:
+ reg = readl(gtr_dev->lpd + RST_LPD);
+ reg |= USB1_RESET;
+ writel(reg, gtr_dev->lpd + RST_LPD);
+ break;
+ case XPSGTR_TYPE_SATA_0:
+ case XPSGTR_TYPE_SATA_1:
+ reg = readl(gtr_dev->fpd + RST_FPD);
+ reg |= SATA_RESET;
+ writel(reg, gtr_dev->fpd + RST_FPD);
+ break;
+ case XPSGTR_TYPE_DP_0:
+ case XPSGTR_TYPE_DP_1:
+ reg = readl(gtr_dev->fpd + RST_FPD);
+ reg |= DP_RESET;
+ writel(reg, gtr_dev->fpd + RST_FPD);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * xpsgtr_controller_release_reset - releases controller from reset
+ * @gtr_phy: pointer to lane
+ */
+static void xpsgtr_controller_release_reset(struct xpsgtr_phy *gtr_phy)
+{
+ struct xpsgtr_dev *gtr_dev = gtr_phy->data;
+ u32 reg;
+
+ switch (gtr_phy->type) {
+ case XPSGTR_TYPE_USB0:
+ reg = readl(gtr_dev->lpd + RST_LPD);
+ reg &= ~USB0_RESET;
+ writel(reg, gtr_dev->lpd + RST_LPD);
+ break;
+ case XPSGTR_TYPE_USB1:
+ reg = readl(gtr_dev->lpd + RST_LPD);
+ reg &= ~USB1_RESET;
+ writel(reg, gtr_dev->lpd + RST_LPD);
+ break;
+ case XPSGTR_TYPE_SATA_0:
+ case XPSGTR_TYPE_SATA_1:
+ reg = readl(gtr_dev->fpd + RST_FPD);
+ reg &= ~SATA_RESET;
+ writel(reg, gtr_dev->fpd + RST_FPD);
+ break;
+ case XPSGTR_TYPE_DP_0:
+ case XPSGTR_TYPE_DP_1:
+ reg = readl(gtr_dev->fpd + RST_FPD);
+ reg &= ~DP_RESET;
+ writel(reg, gtr_dev->fpd + RST_FPD);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * xpsgtr_misc_sata - miscellaneous settings for SATA
+ * @gtr_phy: pointer to lane
+ */
+static void xpsgtr_misc_sata(struct xpsgtr_phy *gtr_phy)
+{
+ u32 offset;
+ struct xpsgtr_dev *gtr_dev = gtr_phy->data;
+
+ /* bypass Descrambler and 8b/10b decoder */
+ offset = gtr_phy->lane * TM_DIG_6_OFFSET + L0_TM_DIG_6;
+ writel(TM_DISABLE_DESCRAMBLE_DECODER, gtr_dev->serdes + offset);
+
+ /* bypass Scrambler and 8b/10b Encoder */
+ offset = gtr_phy->lane * TX_DIG_61_OFFSET + L0_TX_DIG_61;
+ writel(TM_DISABLE_SCRAMBLE_ENCODER, gtr_dev->serdes + offset);
+
+ writel(gtr_phy->lane, gtr_dev->siou + SATA_CONTROL_OFFSET);
+}
+
+/**
+ * xpsgtr_phy_init - initializes a lane
+ * @gtr_phy: pointer to kernel PHY device
+ * Return: 0 on success or error on failure
+ */
+static int xpsgtr_phy_init(struct phy *phy)
+{
+ struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
+ struct xpsgtr_dev *gtr_dev = gtr_phy->data;
+ int ret = 0;
+ u32 offset;
+ u32 reg;
+ u32 nsw;
+ u32 timeout = 500;
+
+ mutex_lock(>r_dev->gtr_mutex);
+
+ xpsgtr_configure_lane(gtr_phy);
+
+ /* Put controller in reset */
+ xpsgtr_controller_reset(gtr_phy);
+
+ /* Enable coarse code saturation limiting logic */
+ offset = gtr_phy->lane * TM_PLL_DIG_37_OFFSET + L0_TM_PLL_DIG_37;
+ writel(TM_COARSE_CODE_LIMIT, gtr_dev->serdes + offset);
+
+ /*
+ * There is a functional issue in the GT. The TX termination resistance
+ * can be out of spec due to a bug in the calibration logic. Below is
+ * the workaround to fix it.
+ */
+ if (!gtr_dev->tx_term_fix) {
+ writel(0x0, gtr_dev->serdes + ICM_CFG0);
+ writel(0x0, gtr_dev->serdes + ICM_CFG1);
+
+ writel(BGCAL_REF_VALUE, gtr_dev->serdes + BGCAL_REF_SEL);
+
+ writel(TM_OVERRIDE_NSW_CODE, gtr_dev->serdes +
+ L3_TM_CALIB_DIG19);
+
+ writel(gtr_phy->lane, gtr_dev->serdes + ICM_CFG0);
+
+ dev_dbg(gtr_dev->dev, "calibrating...\n");
+
+ do {
+ reg = readl(gtr_dev->serdes + L3_CALIB_DONE_STATUS);
+ if ((reg & CALIB_DONE) == CALIB_DONE)
+ break;
+
+ if (!--timeout) {
+ dev_err(gtr_dev->dev, "calibration time out\n");
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+ udelay(1);
+ } while (1);
+
+ dev_dbg(gtr_dev->dev, "calibration done\n");
+
+ nsw = readl(gtr_dev->serdes + L0_TXPMA_ST_3);
+
+ writel(0x0, gtr_dev->serdes + ICM_CFG0);
+ writel(0x0, gtr_dev->serdes + ICM_CFG1);
+
+ reg = readl(gtr_dev->serdes + L3_TM_CALIB_DIG18);
+ reg = (reg & ~L3_TM_CALIB_DIG18_NSW) |
+ ((nsw << NSW_SHIFT) & L3_TM_CALIB_DIG18_NSW);
+ writel(reg, gtr_dev->serdes + L3_TM_CALIB_DIG18);
+
+ reg = readl(gtr_dev->serdes + L3_TM_CALIB_DIG19);
+ reg = (reg & ~L3_TM_CALIB_DIG19_NSW) |
+ (nsw & L3_TM_CALIB_DIG19_NSW);
+
+ writel(reg, gtr_dev->serdes + L3_TM_CALIB_DIG19);
+
+ gtr_dev->tx_term_fix = true;
+ }
+
+ xpsgtr_configure_pll(gtr_phy);
+ xpsgtr_lane_setprotocol(gtr_phy);
+
+ if (gtr_phy->protocol == ICM_PROTOCOL_SATA)
+ xpsgtr_misc_sata(gtr_phy);
+
+ /* Bring controller out of reset */
+ xpsgtr_controller_release_reset(gtr_phy);
+
+ /* Check pll is locked */
+ offset = gtr_phy->lane * PLL_STATUS_READ_OFFSET + L0_PLL_STATUS_READ_1;
+ dev_dbg(gtr_dev->dev, "Waiting for PLL lock...\n");
+
+ timeout = 1000;
+ do {
+ reg = readl(gtr_dev->serdes + offset);
+ if ((reg & PLL_STATUS_LOCKED) == PLL_STATUS_LOCKED)
+ break;
+
+ if (!--timeout) {
+ dev_err(gtr_dev->dev, "PLL lock time out\n");
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+ udelay(1);
+ } while (1);
+
+ gtr_phy->pll_lock = true;
+
+out:
+ dev_info(gtr_dev->dev, "Lane:%d type:%d protocol:%d pll_locked:%s\n",
+ gtr_phy->lane, gtr_phy->type, gtr_phy->protocol,
+ gtr_phy->pll_lock ? "yes" : "no");
+
+ mutex_unlock(>r_dev->gtr_mutex);
+
+ return ret;
+}
+
+/**
+ * xpsgtr_set_lanetype - derives lane type from dts arguments
+ * @gtr_phy: pointer to lane
+ * @controller: type of controller
+ * @lane_num: lane number of the controller in case multilane
+ * controller otherwise controller number
+ * Return: 0 on success or error on failure
+ */
+static int xpsgtr_set_lanetype(struct xpsgtr_phy *gtr_phy, u8 controller,
+ u8 lane_num)
+{
+ switch (controller) {
+ case PHY_TYPE_SATA:
+ if (lane_num == 0)
+ gtr_phy->type = XPSGTR_TYPE_SATA_0;
+ else if (lane_num == 1)
+ gtr_phy->type = XPSGTR_TYPE_SATA_1;
+ else
+ return -EINVAL;
+ break;
+ case PHY_TYPE_USB3:
+ if (lane_num == 0)
+ gtr_phy->type = XPSGTR_TYPE_USB0;
+ else if (lane_num == 1)
+ gtr_phy->type = XPSGTR_TYPE_USB1;
+ else
+ return -EINVAL;
+ break;
+ case PHY_TYPE_DP:
+ if (lane_num == 0)
+ gtr_phy->type = XPSGTR_TYPE_DP_0;
+ else if (lane_num == 1)
+ gtr_phy->type = XPSGTR_TYPE_DP_1;
+ else
+ return -EINVAL;
+ break;
+ case PHY_TYPE_PCIE:
+ if (lane_num == 0)
+ gtr_phy->type = XPSGTR_TYPE_PCIE_0;
+ else if (lane_num == 1)
+ gtr_phy->type = XPSGTR_TYPE_PCIE_1;
+ else if (lane_num == 2)
+ gtr_phy->type = XPSGTR_TYPE_PCIE_2;
+ else if (lane_num == 3)
+ gtr_phy->type = XPSGTR_TYPE_PCIE_3;
+ else
+ return -EINVAL;
+ break;
+ case PHY_TYPE_SGMII:
+ if (lane_num == 0)
+ gtr_phy->type = XPSGTR_TYPE_SGMII0;
+ else if (lane_num == 1)
+ gtr_phy->type = XPSGTR_TYPE_SGMII1;
+ else if (lane_num == 2)
+ gtr_phy->type = XPSGTR_TYPE_SGMII2;
+ else if (lane_num == 3)
+ gtr_phy->type = XPSGTR_TYPE_SGMII3;
+ else
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * xpsgtr_xlate - provides a PHY specific to a controller
+ * @dev: pointer to device
+ * @args: arguments from dts
+ * Return: pointer to kernel PHY device or error on failure
+ */
+static struct phy *xpsgtr_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev);
+ struct xpsgtr_phy *gtr_phy = NULL;
+ struct device_node *phynode = args->np;
+ int index;
+ int i;
+ u8 controller;
+ u8 lane_num;
+
+ if (args->args_count != 2) {
+ dev_err(dev, "Invalid number of cells in 'phy' property\n");
+ return ERR_PTR(-EINVAL);
+ }
+ if (!of_device_is_available(phynode)) {
+ dev_warn(dev, "requested PHY is disabled\n");
+ return ERR_PTR(-ENODEV);
+ }
+ for (index = 0; index < of_get_child_count(dev->of_node); index++) {
+ if (phynode == gtr_dev->phys[index]->phy->dev.of_node) {
+ gtr_phy = gtr_dev->phys[index];
+ break;
+ }
+ }
+ if (!gtr_phy) {
+ dev_err(dev, "failed to find appropriate phy\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ controller = args->args[0];
+ lane_num = args->args[1];
+
+ /* derive lane type */
+ if (xpsgtr_set_lanetype(gtr_phy, controller, lane_num) < 0)
+ return ERR_PTR(-EINVAL);
+
+ gtr_phy->lane = index;
+
+ /*
+ * Check Interconnect Matrix is obeyed i.e, given lane type
+ * is allowed to operate on the lane.
+ */
+ for (i = 0; i < CONTROLLERS_PER_LANE; i++) {
+ if (icm_matrix[gtr_phy->lane][i] == gtr_phy->type)
+ goto valid;
+ }
+ return ERR_PTR(-EINVAL);
+
+valid:
+ return gtr_phy->phy;
+}
+
+static struct phy_ops xpsgtr_phyops = {
+ .init = xpsgtr_phy_init,
+ .owner = THIS_MODULE,
+};
+
+/**
+ * xpsgtr_probe - The device probe function for driver initialization.
+ * @pdev: pointer to the platform device structure.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xpsgtr_probe(struct platform_device *pdev)
+{
+ struct device_node *child, *np = pdev->dev.of_node;
+ struct xpsgtr_dev *gtr_dev;
+ struct phy_provider *provider;
+ struct phy *phy;
+ struct resource *res;
+ int lanecount, port = 0;
+
+ gtr_dev = devm_kzalloc(&pdev->dev, sizeof(*gtr_dev), GFP_KERNEL);
+ if (!gtr_dev)
+ return -ENOMEM;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "serdes");
+ gtr_dev->serdes = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(gtr_dev->serdes))
+ return PTR_ERR(gtr_dev->serdes);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "siou");
+ gtr_dev->siou = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(gtr_dev->siou))
+ return PTR_ERR(gtr_dev->siou);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lpd");
+ gtr_dev->lpd = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(gtr_dev->lpd))
+ return PTR_ERR(gtr_dev->lpd);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fpd");
+ gtr_dev->fpd = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(gtr_dev->fpd))
+ return PTR_ERR(gtr_dev->fpd);
+
+ lanecount = of_get_child_count(np);
+ if (lanecount > MAX_LANES || lanecount == 0)
+ return -EINVAL;
+
+ gtr_dev->phys = devm_kzalloc(&pdev->dev, sizeof(phy) * lanecount,
+ GFP_KERNEL);
+ if (!gtr_dev->phys)
+ return -ENOMEM;
+
+ gtr_dev->dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, gtr_dev);
+
+ mutex_init(>r_dev->gtr_mutex);
+
+ gtr_dev->tx_term_fix = of_property_read_bool(np,
+ "xlnx,tx_termination_fix");
+
+ for_each_child_of_node(np, child) {
+ struct xpsgtr_phy *gtr_phy;
+
+ gtr_phy = devm_kzalloc(&pdev->dev, sizeof(*gtr_phy),
+ GFP_KERNEL);
+ if (!gtr_phy)
+ return -ENOMEM;
+
+ gtr_dev->phys[port] = gtr_phy;
+
+ phy = devm_phy_create(&pdev->dev, child, &xpsgtr_phyops);
+ if (IS_ERR(phy)) {
+ dev_err(&pdev->dev, "failed to create PHY\n");
+ return PTR_ERR(phy);
+ }
+
+ gtr_dev->phys[port]->phy = phy;
+
+ phy_set_drvdata(phy, gtr_dev->phys[port]);
+ gtr_phy->data = gtr_dev;
+ port++;
+ }
+
+ provider = devm_of_phy_provider_register(&pdev->dev, xpsgtr_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(&pdev->dev, "registering provider failed\n");
+ return PTR_ERR(provider);
+ }
+
+ return 0;
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id xpsgtr_of_match[] = {
+ { .compatible = "xlnx,zynqmp-psgtr", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, xpsgtr_of_match);
+
+static struct platform_driver xpsgtr_driver = {
+ .probe = xpsgtr_probe,
+ .driver = {
+ .name = "xilinx-psgtr",
+ .of_match_table = xpsgtr_of_match,
+ },
+};
+
+module_platform_driver(xpsgtr_driver);
+
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Xilinx ZynqMP High speed Gigabit Transceiver");
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
