On 2016/1/13 18:09, liviu.dudau@xxxxxxx wrote:
On Tue, Jan 12, 2016 at 11:54:59PM +0100, Arnd Bergmann wrote:
On Tuesday 12 January 2016 10:14:18 liviu.dudau@xxxxxxx wrote:
OK, looking at of_translate_one() comments it looks like a missing "ranges" property is
only accepted on PowerPC. I suggest you have an empty "ranges" property in your isa
parent node, that will signal to the OF parsing code that the mapping is 1:1. Then have
the IPMI node use the reg = <0x0 0xe4 4>; property values instead of reg = <0x1 0xe4 4>;
A missing ranges property means that there is no translation, while an
empty ranges means a 1:1 translation to the parent bus.
We really want the former here, as I/O port addresses are not mapped into
the MMIO space of the parent bus.
Agree. However of_translate_one()'s behaviour doesn't match our expectations and I have no
useful suggestions on what the right behaviour should be.
I had tried to modify the drivers/of/address.c to address this problem, but it looks
not so general. I'm not sure you have seen this: https://lkml.org/lkml/2016/1/10/89 .
Regards,
Rongrong
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
