Hi Krzysztof, > -----Original Message----- > From: Krzysztof Kozlowski [mailto:k.kozlowski@xxxxxxxxxxx] > Sent: 2016年1月13日 9:46 > To: Yang, Wenyou <Wenyou.Yang@xxxxxxxxx>; Lee Jones > <lee.jones@xxxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Pawel Moll > <pawel.moll@xxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>; Ian Campbell > <ijc+devicetree@xxxxxxxxxxxxxx>; Kumar Gala <galak@xxxxxxxxxxxxxx> > Cc: Javier Martinez Canillas <javier@xxxxxxxxxxxx>; Ferre, Nicolas > <Nicolas.FERRE@xxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx > Subject: Re: [PATCH v3 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC > MFD driver > > On 12.01.2016 18:46, Wenyou Yang wrote: > > This patch adds support for the Active-semi ACT8945A PMIC. > > It is a Multi Function Device with the following subdevices: > > - Regulator > > - Charger > > > > It is interfaced to the host controller using I2C interface, ACT8945A > > is a child device of the I2C. > > > > Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx> > > --- > > > > Changes in v3: None > > Changes in v2: > > - add more help information in Kconfig. > > - update the file header with short version license and author line. > > - remove unused structure members (dev, i2c_client) of stuct act8945a_dev. > > - use define "PLATFORM_DEVID_NONE" for mfd_add_devices(), instead of '-1'. > > - use more explicit info to indicate the failure to add sub devices. > > - remove the unnecessary print out. > > - substitute MODULE_LICENSE("GPL") for MODULE_LICENSE("GPL v2"). > > > > drivers/mfd/Kconfig | 11 +++++ > > drivers/mfd/Makefile | 1 + > > drivers/mfd/act8945a.c | 109 > ++++++++++++++++++++++++++++++++++++++++++ > > include/linux/mfd/act8945a.h | 21 ++++++++ > > 4 files changed, 142 insertions(+) > > create mode 100644 drivers/mfd/act8945a.c create mode 100644 > > include/linux/mfd/act8945a.h > > > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index > > 9ca66de..34375a9 100644 > > --- a/drivers/mfd/Kconfig > > +++ b/drivers/mfd/Kconfig > > @@ -18,6 +18,17 @@ config MFD_CS5535 > > This is the core driver for CS5535/CS5536 MFD functions. This is > > necessary for using the board's GPIO and MFGPT functionality. > > > > +config MFD_ACT8945A > > + bool "Active-semi ACT8945A" > > + select MFD_CORE > > + select REGMAP_I2C > > + depends on I2C && OF > > + help > > + Support for the ACT8945A PMIC from Active-semi. This device > > + features three step-down DC/DC converters and four low-dropout > > + linear regulators, along with a complete ActivePath battery > > + charger. > > + > > config MFD_AS3711 > > bool "AMS AS3711" > > select MFD_CORE > > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index > > 0f230a6..2f1ca82 100644 > > --- a/drivers/mfd/Makefile > > +++ b/drivers/mfd/Makefile > > @@ -6,6 +6,7 @@ > > obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o > > obj-$(CONFIG_MFD_88PM800) += 88pm800.o 88pm80x.o > > obj-$(CONFIG_MFD_88PM805) += 88pm805.o 88pm80x.o > > +obj-$(CONFIG_MFD_ACT8945A) += act8945a.o > > obj-$(CONFIG_MFD_SM501) += sm501.o > > obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o > > obj-$(CONFIG_MFD_BCM590XX) += bcm590xx.o > > diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c new file > > mode 100644 index 0000000..7f8c50a > > --- /dev/null > > +++ b/drivers/mfd/act8945a.c > > @@ -0,0 +1,109 @@ > > +/* > > + * MFD driver for Active-semi ACT8945a PMIC > > + * > > + * Copyright (C) 2015 Atmel Corporation. > > + * > > + * Author: Wenyou Yang <wenyou.yang@xxxxxxxxx> > > + * > > + * This program is free software; you can redistribute it and/or > > +modify it > > + * under the terms of the GNU General Public License as published > > +by the > > + * Free Software Foundation; either version 2 of the License, or (at > > +your > > + * option) any later version. > > + */ > > + > > +#include <linux/i2c.h> > > +#include <linux/mfd/act8945a.h> > > +#include <linux/mfd/core.h> > > +#include <linux/module.h> > > +#include <linux/of_device.h> > > +#include <linux/regmap.h> > > + > > +static const struct mfd_cell act8945a_devs[] = { > > + { > > + .name = "act8945a-pmic", > > + .of_compatible = "active-semi,act8945a-regulator", > > + }, > > + { > > + .name = "act8945a-charger", > > + .of_compatible = "active-semi,act8945a-charger", > > + }, > > +}; > > + > > +static const struct regmap_config act8945a_regmap_config = { > > + .reg_bits = 8, > > + .val_bits = 8, > > +}; > > + > > +static int act8945a_i2c_probe(struct i2c_client *i2c, > > + const struct i2c_device_id *id) { > > + struct act8945a_dev *act8945a; > > + int ret; > > + > > + act8945a = devm_kzalloc(&i2c->dev, sizeof(*act8945a), GFP_KERNEL); > > + if (!act8945a) > > + return -ENOMEM; > > + > > + i2c_set_clientdata(i2c, act8945a); > > + > > + act8945a->regmap = devm_regmap_init_i2c(i2c, > &act8945a_regmap_config); > > + if (IS_ERR(act8945a->regmap)) { > > + ret = PTR_ERR(act8945a->regmap); > > + dev_err(&i2c->dev, "regmap init failed: %d\n", ret); > > + return ret; > > + } > > + > > + ret = mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE, > act8945a_devs, > > + ARRAY_SIZE(act8945a_devs), NULL, 0, NULL); > > + if (ret) { > > + dev_err(&i2c->dev, "Failed to add sub devices\n"); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static int act8945a_i2c_remove(struct i2c_client *i2c) { > > + mfd_remove_devices(&i2c->dev); > > + > > + return 0; > > +} > > + > > +static const struct i2c_device_id act8945a_i2c_id[] = { > > + { "act8945a", 0 }, > > + {} > > +}; > > +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id); > > + > > +static const struct of_device_id act8945a_of_match[] = { > > + {.compatible = "active-semi,act8945a", }, > > Nit: a space before .compatible > > Overall it looks good: > > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> Thank you for your Reviewed-by. > > Best regards, > Krzysztof Best Regards, Wenyou Yang ?韬{.n?????%??檩??w?{.n????z谵{???塄}?财??j:+v?? ? ???2??璀??摺?囤??z夸z罐?+?????w棹f
