Since PWMs are only useful if they are actually connected to an output pin, let users enable them explicitly in their device trees where they should also set up the pin configuration. Signed-off-by: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/imx6ul.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 3aba0bb..863777e 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -512,6 +512,7 @@ <&clks IMX6UL_CLK_PWM5>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; pwm6: pwm@020f4000 { @@ -522,6 +523,7 @@ <&clks IMX6UL_CLK_PWM6>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; pwm7: pwm@020f8000 { @@ -532,6 +534,7 @@ <&clks IMX6UL_CLK_PWM7>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; pwm8: pwm@020fc000 { @@ -542,6 +545,7 @@ <&clks IMX6UL_CLK_PWM8>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; }; -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html