Add DT details for using the clocks from ams AS3722. Signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx> --- Changes from V1: - This is new patch of series which was part of code change, splitting it on different change. Documentation/devicetree/bindings/mfd/as3722.txt | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt index fc2191e..e782f39 100644 --- a/Documentation/devicetree/bindings/mfd/as3722.txt +++ b/Documentation/devicetree/bindings/mfd/as3722.txt @@ -112,6 +112,15 @@ Following are properties of regulator subnode. ams,enable-tracking: Enable tracking with SD1, only supported by LDO3. +Clock: +====== +AS3722 supports one 32KHz clock to output from device. The clock control is +provided through the clock driver. +This binding uses the common clock binding ./clock-bindings.txt. +The device node should have the optional properties to support the clock: +#clock-cells: from common clock binding; shall be set to 1. The clock id for + single clock output is 0. + Example: -------- #include <dt-bindings/mfd/as3722.h> -- 1.7.1.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html