On 01/11/2016 09:39 PM, Dinh Nguyen wrote: > On 01/10/2016 10:34 PM, Marek Vasut wrote: >> From: Graham Moore <grmoore@xxxxxxxxxxxxxxxxxxxxx> >> >> Add support for the Cadence QSPI controller. This controller is >> present in the Altera SoCFPGA SoCs and this driver has been tested >> on the Cyclone V SoC. >> [...] >> diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig >> index 43bafde..7e29050 100644 >> --- a/drivers/mtd/spi-nor/Kconfig >> +++ b/drivers/mtd/spi-nor/Kconfig >> @@ -50,4 +50,15 @@ config SPI_NXP_SPIFI >> Flash. Enable this option if you have a device with a SPIFI >> controller and want to access the Flash as a mtd device. >> >> +config SPI_CADENCE_QUADSPI >> + tristate "Cadence Quad SPI controller" >> + depends on OF && (ARCH_SOCFPGA || COMPILE_TEST) > > I think you can remove the ARCH_SOCFPGA dependency as this driver is > used on a TI EVM as well. I think above usage is correct. This will enable SPI_CADENCE_QUADSPI to be selected when ARCH_SOCFPGA=y without having to enable COMPILE_TEST. AFAIK, COMPILE_TEST is used usually to build test the driver w/o having to enable ARCH specific configs (usually by maintainers). For TI EVM, I would patch this file to add my architecture later(i.e along with DT patch to my board). -- Regards Vignesh -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
