Hi Martin,
Am 09.01.2016 um 14:07 schrieb kernel@xxxxxxxxxxxxxxxx:
> From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
>
> The bcm2835 SOC contains an auxiliary uart, which is very close
> to the ns16550 with some differences.
>
> The big difference is that the uart HW is not using an internal divider
> of 16 but 8, which results in an effictive baud-rate being twice
> the requested baud-rate.
>
> This driver handles this device correctly and handles the difference in
> the HW divider by scaling up the clock ba a factor of 2.
>
> The approach to write a separate (wrapper) driver instead of using a
> multiplying clock and "ns16550" as compatibility in the device-tree
> has been recommended by Stephen Warren.
>
> Signed-off-by: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
> ---
> drivers/tty/serial/8250/8250_bcm2835aux.c | 143 +++++++++++++++++++++++++++++
> drivers/tty/serial/8250/Kconfig | 8 ++
> drivers/tty/serial/8250/Makefile | 1 +
> 3 files changed, 152 insertions(+)
> create mode 100644 drivers/tty/serial/8250/8250_bcm2835aux.c
>
> diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
> new file mode 100644
> index 0000000..718c357
> --- /dev/null
> +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
> @@ -0,0 +1,143 @@
> +/*
> + * Serial port driver for BCM2835AUX UART
> + *
> + * Copyright (C) 2016 Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
> + *
> + * Based on 8250_lpc18xx.c:
> + * Copyright (C) 2015 Joachim Eastwood <manabian@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +#include "8250.h"
> +
> +struct bcm2835aux_data {
> + struct uart_8250_port uart;
> + struct clk *clk;
> +};
> +
> +static int bcm2835aux_serial_probe(struct platform_device *pdev)
> +{
> + struct bcm2835aux_data *data;
> + struct resource *res;
> + int ret;
> +
> + /* allocate the custom structure */
> + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + /* initialize data */
> + spin_lock_init(&data->uart.port.lock);
> + data->uart.port.dev = &pdev->dev;
> + data->uart.port.regshift = 2;
> + data->uart.port.type = PORT_16550;
> + data->uart.port.iotype = UPIO_MEM;
> + data->uart.port.fifosize = 8;
data->uart.capabilities = UART_CAP_FIFO; ?
> + data->uart.port.flags = UPF_SHARE_IRQ |
> + UPF_FIXED_PORT |
> + UPF_FIXED_TYPE |
> + UPF_SKIP_TEST;
> +
> + /* get the clock - this also enables the HW */
> + data->clk = devm_clk_get(&pdev->dev, NULL);
> + ret = PTR_ERR_OR_ZERO(data->clk);
> + if (ret) {
> + dev_err(&pdev->dev, "could not get clk: %d\n", ret);
> + return ret;
> + }
> +
> + /* get the interrupt */
> + data->uart.port.irq = platform_get_irq(pdev, 0);
> + if (data->uart.port.irq < 0) {
> + dev_err(&pdev->dev, "irq not found - %i",
> + data->uart.port.irq);
> + return data->uart.port.irq;
> + }
> +
> + /* map the main registers */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(&pdev->dev, "memory resource not found");
> + return -EINVAL;
> + }
> + data->uart.port.membase = devm_ioremap_resource(&pdev->dev, res);
> + ret = PTR_ERR_OR_ZERO(data->uart.port.membase);
> + if (ret)
> + return ret;
> +
> + /* Check for a fixed line number */
> + ret = of_alias_get_id(pdev->dev.of_node, "serial");
> + if (ret >= 0)
> + data->uart.port.line = ret;
> +
> + /* enable the clock as a last step */
> + ret = clk_prepare_enable(data->clk);
> + if (ret) {
> + dev_err(&pdev->dev, "unable to enable uart clock\n");
> + return ret;
> + }
> +
> + /* the HW-clock divider for bcm2835aux is 8,
> + * but 8250 expects a divider of 16,
> + * so we have to multiply the actual clock by 2
> + * to get identical baudrates.
> + */
> + data->uart.port.uartclk = clk_get_rate(data->clk) * 2;
> +
> + /* register the port */
> + ret = serial8250_register_8250_port(&data->uart);
> + if (ret < 0) {
> + dev_err(&pdev->dev,
> + "unable to register 8250 port - %d\n", ret);
This should fit in one line.
> + goto dis_clk;
> + }
> + data->uart.port.line = ret;
This looks wrong because it overwrites the result of of_alias_get_id.
Either
you store it in a new member of bcm2835aux_data or drop the assignment.
> +
> + platform_set_drvdata(pdev, data);
> +
> + return 0;
> +
> +dis_clk:
> + clk_disable_unprepare(data->clk);
> + return ret;
> +}
> +
> +static int bcm2835aux_serial_remove(struct platform_device *pdev)
> +{
> + struct bcm2835aux_data *data = platform_get_drvdata(pdev);
> +
> + serial8250_unregister_port(data->uart.port.line);
> + clk_disable_unprepare(data->clk);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id bcm2835aux_serial_match[] = {
> + { .compatible = "brcm,bcm2835-aux-uart" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, bcm2835aux_serial_match);
> +
> +static struct platform_driver bcm2835aux_serial_driver = {
> + .driver = {
> + .name = "bcm2835-aux-uart",
> + .of_match_table = bcm2835aux_serial_match,
> + },
> + .probe = bcm2835aux_serial_probe,
> + .remove = bcm2835aux_serial_remove,
> +};
> +module_platform_driver(bcm2835aux_serial_driver);
> +
> +MODULE_DESCRIPTION("BCM2835 auxiliar UART driver");
> +MODULE_AUTHOR("Martin Sperl <kernel@xxxxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
> index 6412f14..105aa19 100644
> --- a/drivers/tty/serial/8250/Kconfig
> +++ b/drivers/tty/serial/8250/Kconfig
> @@ -272,6 +272,14 @@ config SERIAL_8250_ACORN
> system, say Y to this option. The driver can handle 1, 2, or 3 port
> cards. If unsure, say N.
>
> +config SERIAL_8250_BCM2835AUX
> + tristate "BCM2835 auxiliar uart support"
BCM2835 auxiliary mini UART support
> + depends on ARCH_BCM2835 || COMPILE_TEST
> + depends on SERIAL_8250 && SERIAL_8250_SHARE_IRQ
> + help
> + support for the BCM2835 auxiliar uart.
auxiliary UART
Since it's a mini UART it would be helpful to write down the
limitiations here.
> + If unsure, say N.
> +
> config SERIAL_8250_FSL
> bool
> depends on SERIAL_8250_CONSOLE
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
