Re: [PATCH 1/2] mfd: act8945a: add Active-semi ACT8945A PMIC MFD driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, 08 Jan 2016, Wenyou Yang wrote:

> This patch adds support for the Active-semi ACT8945A PMIC.
> It is a Multi Function Device with the following subdevices:
>  - Regulator
>  - Charger
> 
> It is interfaced to the host controller using I2C interface,
> ACT8945A is a child device of the I2C.
> 
> Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx>
> ---
> 
>  drivers/mfd/Kconfig          |    8 +++
>  drivers/mfd/Makefile         |    1 +
>  drivers/mfd/act8945a.c       |  122 ++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/act8945a.h |   25 +++++++++
>  4 files changed, 156 insertions(+)
>  create mode 100644 drivers/mfd/act8945a.c
>  create mode 100644 include/linux/mfd/act8945a.h
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9581ebb..018c72d 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -18,6 +18,14 @@ config MFD_CS5535
>  	  This is the core driver for CS5535/CS5536 MFD functions.  This is
>            necessary for using the board's GPIO and MFGPT functionality.
>  
> +config MFD_ACT8945A
> +	bool "Active-semi ACT8945A"
> +	select MFD_CORE
> +	select REGMAP_I2C
> +	depends on I2C && OF
> +	help
> +	  Support for the ACT8945A PMIC from Active-Semi

Checkpatch usually complains about single line helps.

>  config MFD_AS3711
>  	bool "AMS AS3711"
>  	select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 0f230a6..2f1ca82 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -6,6 +6,7 @@
>  obj-$(CONFIG_MFD_88PM860X)	+= 88pm860x.o
>  obj-$(CONFIG_MFD_88PM800)	+= 88pm800.o 88pm80x.o
>  obj-$(CONFIG_MFD_88PM805)	+= 88pm805.o 88pm80x.o
> +obj-$(CONFIG_MFD_ACT8945A)	+= act8945a.o
>  obj-$(CONFIG_MFD_SM501)		+= sm501.o
>  obj-$(CONFIG_MFD_ASIC3)		+= asic3.o tmio_core.o
>  obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
> diff --git a/drivers/mfd/act8945a.c b/drivers/mfd/act8945a.c
> new file mode 100644
> index 0000000..b9b8685
> --- /dev/null
> +++ b/drivers/mfd/act8945a.c
> @@ -0,0 +1,122 @@
> +/*
> + * MFD driver for Active-semi ACT8945a PMIC
> + *
> + * Copyright (C) 2015 Atmel Corporation.

Please update this.

> + *                    Wenyou Yang <wenyou.yang@xxxxxxxxx>

* Author: Wenyou Yang <wenyou.yang@xxxxxxxxx>

> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.

This is the long version.  Any chance it can be shortened?

> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/mfd/act8945a.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +static const struct mfd_cell act8945a_devs[] = {
> +	{
> +		.name = "act8945a-pmic",
> +		.of_compatible = "active-semi,act8945a-regulator",
> +	},
> +	{
> +		.name = "act8945a-charger",
> +		.of_compatible = "active-semi,act8945a-charger",
> +	},
> +};
> +
> +static const struct regmap_config act8945a_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +};
> +
> +static int act8945a_i2c_probe(struct i2c_client *client,
> +			     const struct i2c_device_id *id)
> +{
> +	struct act8945a_dev *act8945a;
> +	int ret;
> +
> +	act8945a = devm_kzalloc(&client->dev, sizeof(*act8945a), GFP_KERNEL);
> +	if (act8945a == NULL)

if (!act8945a)

> +		return -ENOMEM;
> +
> +	i2c_set_clientdata(client, act8945a);
> +
> +	act8945a->dev = &client->dev;
> +	act8945a->i2c_client = client;

If you're saving 'client' already, you don't need to save 'dev' too,
as one can be retrieved from the other.

> +	act8945a->regmap = devm_regmap_init_i2c(client,
> +						&act8945a_regmap_config);

Don't we have a generic call to obtain a single 8bit register yet?

> +	if (IS_ERR(act8945a->regmap)) {
> +		ret = PTR_ERR(act8945a->regmap);
> +		dev_err(&client->dev, "regmap init failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = mfd_add_devices(act8945a->dev, -1, act8945a_devs,

Please use the correct defines, instead of '-1'.

> +			      ARRAY_SIZE(act8945a_devs), NULL, 0, NULL);
> +	if (ret < 0) {

if (ret)

> +		dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret);

Be more explicit.

"Failed to add sub devices".

> +		return ret;
> +	}
> +
> +	dev_info(&client->dev, "added %zu mfd sub-devices\n",
> +		 ARRAY_SIZE(act8945a_devs));

This serves no one, please remove.

> +	return 0;
> +
> +}
> +
> +static int act8945a_i2c_remove(struct i2c_client *i2c)
> +{
> +	struct act8945a_dev *act8945a = i2c_get_clientdata(i2c);
> +
> +	mfd_remove_devices(act8945a->dev);

mfd_remove_devices(i2c->dev);

> +	return 0;
> +}
> +
> +static const struct i2c_device_id act8945a_i2c_id[] = {
> +	{ "act8945a", 0 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, act8945a_i2c_id);
> +
> +static const struct of_device_id act8945a_of_match[] = {
> +	{.compatible = "active-semi,act8945a", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, act8945a_of_match);
> +
> +static struct i2c_driver act8945a_i2c_driver = {
> +	.driver = {
> +		   .name = "act8945a",
> +		   .owner = THIS_MODULE,

Remove this line, it's taken care of elsewhere.

> +		   .of_match_table = of_match_ptr(act8945a_of_match),
> +	},
> +	.probe = act8945a_i2c_probe,
> +	.remove = act8945a_i2c_remove,
> +	.id_table = act8945a_i2c_id,
> +};
> +
> +static int __init act8945a_i2c_init(void)
> +{
> +	return i2c_add_driver(&act8945a_i2c_driver);
> +}
> +subsys_initcall(act8945a_i2c_init);
> +
> +static void __exit act8945a_i2c_exit(void)
> +{
> +	i2c_del_driver(&act8945a_i2c_driver);
> +}
> +module_exit(act8945a_i2c_exit);
> +
> +MODULE_DESCRIPTION("ACT8945A PMIC multi-function driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Wenyou Yang <wenyou.yang@xxxxxxxxx>");
> diff --git a/include/linux/mfd/act8945a.h b/include/linux/mfd/act8945a.h
> new file mode 100644
> index 0000000..5b18d16
> --- /dev/null
> +++ b/include/linux/mfd/act8945a.h
> @@ -0,0 +1,25 @@
> +/*
> + * MFD for Active-semi ACT8945A PMIC
> + *
> + * Copyright (C) 2015 Atmel Corporation.

Please update this.

> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _LINUX_MFD_ACT8945A_H
> +#define _LINUX_MFD_ACT8945A_H
> +
> +struct act8945a_dev {
> +	struct device *dev;

I don't think you need this.

> +	struct i2c_client *i2c_client;

Where is this used?

> +	struct regmap *regmap;

Where is this used?

> +};
> +
> +#endif

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux