[PATCHv12][ 4/8] pinctrl: pinctrl-imx: add imx25 pinctrl driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This is mostly cut and paste from the imx35 pinctrl driver.
The data was generated using sed and awk on
  arch/arm/plat-mxc/include/mach/iomux-mx25.h.

Cc: Rob Herring <rob.herring@xxxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Stephen Warren <swarren@xxxxxxxxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Shawn Guo <shawn.guo@xxxxxxxxxx>
Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx>
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Eric Bénard <eric@xxxxxxxxxx>
Signed-off-by: Denis Carikli <denis@xxxxxxxxxx>
Acked-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
ChangeLog v10->v11:
- Added Shawn Guo in the Cc list.
- Splitted the patch to be only pinctrl driver specific.
- Removed the group control registers, and the PAD_CTL_DRIVE_VOLAGAGE_* pad configurations.
  (They were not used).

ChangeLog v9->v10:
- Added a imx25-pingrp.h header.
- Removed backslash-newline at end of imx25-pingrp.h

ChangeLog v8->v9:
- Whitespace cleanup betwen the CC: and Signed-off-by.
- Kconfig: rebased to make it apply on the new HEAD.
---
 .../bindings/pinctrl/fsl,imx25-pinctrl.txt         |   23 ++
 drivers/pinctrl/Kconfig                            |    9 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/pinctrl-imx25.c                    |  351 ++++++++++++++++++++
 4 files changed, 384 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt
 create mode 100644 drivers/pinctrl/pinctrl-imx25.c

diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt
new file mode 100644
index 0000000..fd653bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt
@@ -0,0 +1,23 @@
+* Freescale IMX25 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+CONFIG bits definition:
+PAD_CTL_HYS			(1 << 8)
+PAD_CTL_PKE			(1 << 7)
+PAD_CTL_PUE			(1 << 6)
+PAD_CTL_PUS_100K_DOWN		(0 << 4)
+PAD_CTL_PUS_47K_UP		(1 << 4)
+PAD_CTL_PUS_100K_UP		(2 << 4)
+PAD_CTL_PUS_22K_UP		(3 << 4)
+PAD_CTL_ODE_CMOS		(0 << 3)
+PAD_CTL_ODE_OPENDRAIN		(1 << 3)
+PAD_CTL_DSE_NOMINAL		(0 << 1)
+PAD_CTL_DSE_HIGH		(1 << 1)
+PAD_CTL_DSE_MAX			(2 << 1)
+PAD_CTL_SRE_FAST		(1 << 0)
+PAD_CTL_SRE_SLOW		(0 << 0)
+
+Refer to imx25-pinfunc.h in device tree source folder for all available
+imx25 PIN_FUNC_ID.
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index b6e864e..6716be9 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -80,6 +80,15 @@ config PINCTRL_IMX
 	select PINMUX
 	select PINCONF
 
+
+config PINCTRL_IMX25
+        bool "IMX25 pinctrl driver"
+        depends on OF
+        depends on SOC_IMX25
+        select PINCTRL_IMX
+        help
+          Say Y here to enable the imx25 pinctrl driver
+
 config PINCTRL_IMX35
 	bool "IMX35 pinctrl driver"
 	depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 496d9bf..9bf4b16 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_PINCTRL_IMX6SL)	+= pinctrl-imx6sl.o
 obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
 obj-$(CONFIG_PINCTRL_MXS)	+= pinctrl-mxs.o
 obj-$(CONFIG_PINCTRL_IMX23)	+= pinctrl-imx23.o
+obj-$(CONFIG_PINCTRL_IMX25)	+= pinctrl-imx25.o
 obj-$(CONFIG_PINCTRL_IMX28)	+= pinctrl-imx28.o
 obj-$(CONFIG_PINCTRL_NOMADIK)	+= pinctrl-nomadik.o
 obj-$(CONFIG_PINCTRL_STN8815)	+= pinctrl-nomadik-stn8815.o
diff --git a/drivers/pinctrl/pinctrl-imx25.c b/drivers/pinctrl/pinctrl-imx25.c
new file mode 100644
index 0000000..8994b43
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-imx25.c
@@ -0,0 +1,351 @@
+/*
+ * imx25 pinctrl driver.
+ *
+ * Copyright 2013 Eukréa Electromatique <denis@xxxxxxxxxx>
+ *
+ * This driver was mostly copied from the imx51 pinctrl driver which has:
+ *
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Linaro, Inc.
+ *
+ * Author: Dong Aisheng <dong.aisheng@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-imx.h"
+
+enum imx25_pads {
+	MX25_PAD_RESERVE0 = 1,
+	MX25_PAD_RESERVE1 = 2,
+	MX25_PAD_A10 = 3,
+	MX25_PAD_A13 = 4,
+	MX25_PAD_A14 = 5,
+	MX25_PAD_A15 = 6,
+	MX25_PAD_A16 = 7,
+	MX25_PAD_A17 = 8,
+	MX25_PAD_A18 = 9,
+	MX25_PAD_A19 = 10,
+	MX25_PAD_A20 = 11,
+	MX25_PAD_A21 = 12,
+	MX25_PAD_A22 = 13,
+	MX25_PAD_A23 = 14,
+	MX25_PAD_A24 = 15,
+	MX25_PAD_A25 = 16,
+	MX25_PAD_EB0 = 17,
+	MX25_PAD_EB1 = 18,
+	MX25_PAD_OE = 19,
+	MX25_PAD_CS0 = 20,
+	MX25_PAD_CS1 = 21,
+	MX25_PAD_CS4 = 22,
+	MX25_PAD_CS5 = 23,
+	MX25_PAD_NF_CE0 = 24,
+	MX25_PAD_ECB = 25,
+	MX25_PAD_LBA = 26,
+	MX25_PAD_BCLK = 27,
+	MX25_PAD_RW = 28,
+	MX25_PAD_NFWE_B = 29,
+	MX25_PAD_NFRE_B = 30,
+	MX25_PAD_NFALE = 31,
+	MX25_PAD_NFCLE = 32,
+	MX25_PAD_NFWP_B = 33,
+	MX25_PAD_NFRB = 34,
+	MX25_PAD_D15 = 35,
+	MX25_PAD_D14 = 36,
+	MX25_PAD_D13 = 37,
+	MX25_PAD_D12 = 38,
+	MX25_PAD_D11 = 39,
+	MX25_PAD_D10 = 40,
+	MX25_PAD_D9 = 41,
+	MX25_PAD_D8 = 42,
+	MX25_PAD_D7 = 43,
+	MX25_PAD_D6 = 44,
+	MX25_PAD_D5 = 45,
+	MX25_PAD_D4 = 46,
+	MX25_PAD_D3 = 47,
+	MX25_PAD_D2 = 48,
+	MX25_PAD_D1 = 49,
+	MX25_PAD_D0 = 50,
+	MX25_PAD_LD0 = 51,
+	MX25_PAD_LD1 = 52,
+	MX25_PAD_LD2 = 53,
+	MX25_PAD_LD3 = 54,
+	MX25_PAD_LD4 = 55,
+	MX25_PAD_LD5 = 56,
+	MX25_PAD_LD6 = 57,
+	MX25_PAD_LD7 = 58,
+	MX25_PAD_LD8 = 59,
+	MX25_PAD_LD9 = 60,
+	MX25_PAD_LD10 = 61,
+	MX25_PAD_LD11 = 62,
+	MX25_PAD_LD12 = 63,
+	MX25_PAD_LD13 = 64,
+	MX25_PAD_LD14 = 65,
+	MX25_PAD_LD15 = 66,
+	MX25_PAD_HSYNC = 67,
+	MX25_PAD_VSYNC = 68,
+	MX25_PAD_LSCLK = 69,
+	MX25_PAD_OE_ACD = 70,
+	MX25_PAD_CONTRAST = 71,
+	MX25_PAD_PWM = 72,
+	MX25_PAD_CSI_D2 = 73,
+	MX25_PAD_CSI_D3 = 74,
+	MX25_PAD_CSI_D4 = 75,
+	MX25_PAD_CSI_D5 = 76,
+	MX25_PAD_CSI_D6 = 77,
+	MX25_PAD_CSI_D7 = 78,
+	MX25_PAD_CSI_D8 = 79,
+	MX25_PAD_CSI_D9 = 80,
+	MX25_PAD_CSI_MCLK = 81,
+	MX25_PAD_CSI_VSYNC = 82,
+	MX25_PAD_CSI_HSYNC = 83,
+	MX25_PAD_CSI_PIXCLK = 84,
+	MX25_PAD_I2C1_CLK = 85,
+	MX25_PAD_I2C1_DAT = 86,
+	MX25_PAD_CSPI1_MOSI = 87,
+	MX25_PAD_CSPI1_MISO = 88,
+	MX25_PAD_CSPI1_SS0 = 89,
+	MX25_PAD_CSPI1_SS1 = 90,
+	MX25_PAD_CSPI1_SCLK = 91,
+	MX25_PAD_CSPI1_RDY = 92,
+	MX25_PAD_UART1_RXD = 93,
+	MX25_PAD_UART1_TXD = 94,
+	MX25_PAD_UART1_RTS = 95,
+	MX25_PAD_UART1_CTS = 96,
+	MX25_PAD_UART2_RXD = 97,
+	MX25_PAD_UART2_TXD = 98,
+	MX25_PAD_UART2_RTS = 99,
+	MX25_PAD_UART2_CTS = 100,
+	MX25_PAD_SD1_CMD = 101,
+	MX25_PAD_SD1_CLK = 102,
+	MX25_PAD_SD1_DATA0 = 103,
+	MX25_PAD_SD1_DATA1 = 104,
+	MX25_PAD_SD1_DATA2 = 105,
+	MX25_PAD_SD1_DATA3 = 106,
+	MX25_PAD_KPP_ROW0 = 107,
+	MX25_PAD_KPP_ROW1 = 108,
+	MX25_PAD_KPP_ROW2 = 109,
+	MX25_PAD_KPP_ROW3 = 110,
+	MX25_PAD_KPP_COL0 = 111,
+	MX25_PAD_KPP_COL1 = 112,
+	MX25_PAD_KPP_COL2 = 113,
+	MX25_PAD_KPP_COL3 = 114,
+	MX25_PAD_FEC_MDC = 115,
+	MX25_PAD_FEC_MDIO = 116,
+	MX25_PAD_FEC_TDATA0 = 117,
+	MX25_PAD_FEC_TDATA1 = 118,
+	MX25_PAD_FEC_TX_EN = 119,
+	MX25_PAD_FEC_RDATA0 = 120,
+	MX25_PAD_FEC_RDATA1 = 121,
+	MX25_PAD_FEC_RX_DV = 122,
+	MX25_PAD_FEC_TX_CLK = 123,
+	MX25_PAD_RTCK = 124,
+	MX25_PAD_DE_B = 125,
+	MX25_PAD_GPIO_A = 126,
+	MX25_PAD_GPIO_B = 127,
+	MX25_PAD_GPIO_C = 128,
+	MX25_PAD_GPIO_D = 129,
+	MX25_PAD_GPIO_E = 130,
+	MX25_PAD_GPIO_F = 131,
+	MX25_PAD_EXT_ARMCLK = 132,
+	MX25_PAD_UPLL_BYPCLK = 133,
+	MX25_PAD_VSTBY_REQ = 134,
+	MX25_PAD_VSTBY_ACK = 135,
+	MX25_PAD_POWER_FAIL  = 136,
+	MX25_PAD_CLKO = 137,
+	MX25_PAD_BOOT_MODE0 = 138,
+	MX25_PAD_BOOT_MODE1 = 139,
+};
+
+/* Pad names for the pinmux subsystem */
+static const struct pinctrl_pin_desc imx25_pinctrl_pads[] = {
+	IMX_PINCTRL_PIN(MX25_PAD_RESERVE0),
+	IMX_PINCTRL_PIN(MX25_PAD_RESERVE1),
+	IMX_PINCTRL_PIN(MX25_PAD_A10),
+	IMX_PINCTRL_PIN(MX25_PAD_A13),
+	IMX_PINCTRL_PIN(MX25_PAD_A14),
+	IMX_PINCTRL_PIN(MX25_PAD_A15),
+	IMX_PINCTRL_PIN(MX25_PAD_A16),
+	IMX_PINCTRL_PIN(MX25_PAD_A17),
+	IMX_PINCTRL_PIN(MX25_PAD_A18),
+	IMX_PINCTRL_PIN(MX25_PAD_A19),
+	IMX_PINCTRL_PIN(MX25_PAD_A20),
+	IMX_PINCTRL_PIN(MX25_PAD_A21),
+	IMX_PINCTRL_PIN(MX25_PAD_A22),
+	IMX_PINCTRL_PIN(MX25_PAD_A23),
+	IMX_PINCTRL_PIN(MX25_PAD_A24),
+	IMX_PINCTRL_PIN(MX25_PAD_A25),
+	IMX_PINCTRL_PIN(MX25_PAD_EB0),
+	IMX_PINCTRL_PIN(MX25_PAD_EB1),
+	IMX_PINCTRL_PIN(MX25_PAD_OE),
+	IMX_PINCTRL_PIN(MX25_PAD_CS0),
+	IMX_PINCTRL_PIN(MX25_PAD_CS1),
+	IMX_PINCTRL_PIN(MX25_PAD_CS4),
+	IMX_PINCTRL_PIN(MX25_PAD_CS5),
+	IMX_PINCTRL_PIN(MX25_PAD_NF_CE0),
+	IMX_PINCTRL_PIN(MX25_PAD_ECB),
+	IMX_PINCTRL_PIN(MX25_PAD_LBA),
+	IMX_PINCTRL_PIN(MX25_PAD_BCLK),
+	IMX_PINCTRL_PIN(MX25_PAD_RW),
+	IMX_PINCTRL_PIN(MX25_PAD_NFWE_B),
+	IMX_PINCTRL_PIN(MX25_PAD_NFRE_B),
+	IMX_PINCTRL_PIN(MX25_PAD_NFALE),
+	IMX_PINCTRL_PIN(MX25_PAD_NFCLE),
+	IMX_PINCTRL_PIN(MX25_PAD_NFWP_B),
+	IMX_PINCTRL_PIN(MX25_PAD_NFRB),
+	IMX_PINCTRL_PIN(MX25_PAD_D15),
+	IMX_PINCTRL_PIN(MX25_PAD_D14),
+	IMX_PINCTRL_PIN(MX25_PAD_D13),
+	IMX_PINCTRL_PIN(MX25_PAD_D12),
+	IMX_PINCTRL_PIN(MX25_PAD_D11),
+	IMX_PINCTRL_PIN(MX25_PAD_D10),
+	IMX_PINCTRL_PIN(MX25_PAD_D9),
+	IMX_PINCTRL_PIN(MX25_PAD_D8),
+	IMX_PINCTRL_PIN(MX25_PAD_D7),
+	IMX_PINCTRL_PIN(MX25_PAD_D6),
+	IMX_PINCTRL_PIN(MX25_PAD_D5),
+	IMX_PINCTRL_PIN(MX25_PAD_D4),
+	IMX_PINCTRL_PIN(MX25_PAD_D3),
+	IMX_PINCTRL_PIN(MX25_PAD_D2),
+	IMX_PINCTRL_PIN(MX25_PAD_D1),
+	IMX_PINCTRL_PIN(MX25_PAD_D0),
+	IMX_PINCTRL_PIN(MX25_PAD_LD0),
+	IMX_PINCTRL_PIN(MX25_PAD_LD1),
+	IMX_PINCTRL_PIN(MX25_PAD_LD2),
+	IMX_PINCTRL_PIN(MX25_PAD_LD3),
+	IMX_PINCTRL_PIN(MX25_PAD_LD4),
+	IMX_PINCTRL_PIN(MX25_PAD_LD5),
+	IMX_PINCTRL_PIN(MX25_PAD_LD6),
+	IMX_PINCTRL_PIN(MX25_PAD_LD7),
+	IMX_PINCTRL_PIN(MX25_PAD_LD8),
+	IMX_PINCTRL_PIN(MX25_PAD_LD9),
+	IMX_PINCTRL_PIN(MX25_PAD_LD10),
+	IMX_PINCTRL_PIN(MX25_PAD_LD11),
+	IMX_PINCTRL_PIN(MX25_PAD_LD12),
+	IMX_PINCTRL_PIN(MX25_PAD_LD13),
+	IMX_PINCTRL_PIN(MX25_PAD_LD14),
+	IMX_PINCTRL_PIN(MX25_PAD_LD15),
+	IMX_PINCTRL_PIN(MX25_PAD_HSYNC),
+	IMX_PINCTRL_PIN(MX25_PAD_VSYNC),
+	IMX_PINCTRL_PIN(MX25_PAD_LSCLK),
+	IMX_PINCTRL_PIN(MX25_PAD_OE_ACD),
+	IMX_PINCTRL_PIN(MX25_PAD_CONTRAST),
+	IMX_PINCTRL_PIN(MX25_PAD_PWM),
+	IMX_PINCTRL_PIN(MX25_PAD_CSI_D2),
+	IMX_PINCTRL_PIN(MX25_PAD_CSI_D3),
+	IMX_PINCTRL_PIN(MX25_PAD_CSI_D4),
+	IMX_PINCTRL_PIN(MX25_PAD_CSI_D5),
+	IMX_PINCTRL_PIN(MX25_PAD_CSI_D6),
+	IMX_PINCTRL_PIN(MX25_PAD_CSI_D7),
+	IMX_PINCTRL_PIN(MX25_PAD_CSI_D8),
+	IMX_PINCTRL_PIN(MX25_PAD_CSI_D9),
+	IMX_PINCTRL_PIN(MX25_PAD_CSI_MCLK),
+	IMX_PINCTRL_PIN(MX25_PAD_CSI_VSYNC),
+	IMX_PINCTRL_PIN(MX25_PAD_CSI_HSYNC),
+	IMX_PINCTRL_PIN(MX25_PAD_CSI_PIXCLK),
+	IMX_PINCTRL_PIN(MX25_PAD_I2C1_CLK),
+	IMX_PINCTRL_PIN(MX25_PAD_I2C1_DAT),
+	IMX_PINCTRL_PIN(MX25_PAD_CSPI1_MOSI),
+	IMX_PINCTRL_PIN(MX25_PAD_CSPI1_MISO),
+	IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SS0),
+	IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SS1),
+	IMX_PINCTRL_PIN(MX25_PAD_CSPI1_SCLK),
+	IMX_PINCTRL_PIN(MX25_PAD_CSPI1_RDY),
+	IMX_PINCTRL_PIN(MX25_PAD_UART1_RXD),
+	IMX_PINCTRL_PIN(MX25_PAD_UART1_TXD),
+	IMX_PINCTRL_PIN(MX25_PAD_UART1_RTS),
+	IMX_PINCTRL_PIN(MX25_PAD_UART1_CTS),
+	IMX_PINCTRL_PIN(MX25_PAD_UART2_RXD),
+	IMX_PINCTRL_PIN(MX25_PAD_UART2_TXD),
+	IMX_PINCTRL_PIN(MX25_PAD_UART2_RTS),
+	IMX_PINCTRL_PIN(MX25_PAD_UART2_CTS),
+	IMX_PINCTRL_PIN(MX25_PAD_SD1_CMD),
+	IMX_PINCTRL_PIN(MX25_PAD_SD1_CLK),
+	IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA0),
+	IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA1),
+	IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA2),
+	IMX_PINCTRL_PIN(MX25_PAD_SD1_DATA3),
+	IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW0),
+	IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW1),
+	IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW2),
+	IMX_PINCTRL_PIN(MX25_PAD_KPP_ROW3),
+	IMX_PINCTRL_PIN(MX25_PAD_KPP_COL0),
+	IMX_PINCTRL_PIN(MX25_PAD_KPP_COL1),
+	IMX_PINCTRL_PIN(MX25_PAD_KPP_COL2),
+	IMX_PINCTRL_PIN(MX25_PAD_KPP_COL3),
+	IMX_PINCTRL_PIN(MX25_PAD_FEC_MDC),
+	IMX_PINCTRL_PIN(MX25_PAD_FEC_MDIO),
+	IMX_PINCTRL_PIN(MX25_PAD_FEC_TDATA0),
+	IMX_PINCTRL_PIN(MX25_PAD_FEC_TDATA1),
+	IMX_PINCTRL_PIN(MX25_PAD_FEC_TX_EN),
+	IMX_PINCTRL_PIN(MX25_PAD_FEC_RDATA0),
+	IMX_PINCTRL_PIN(MX25_PAD_FEC_RDATA1),
+	IMX_PINCTRL_PIN(MX25_PAD_FEC_RX_DV),
+	IMX_PINCTRL_PIN(MX25_PAD_FEC_TX_CLK),
+	IMX_PINCTRL_PIN(MX25_PAD_RTCK),
+	IMX_PINCTRL_PIN(MX25_PAD_DE_B),
+	IMX_PINCTRL_PIN(MX25_PAD_GPIO_A),
+	IMX_PINCTRL_PIN(MX25_PAD_GPIO_B),
+	IMX_PINCTRL_PIN(MX25_PAD_GPIO_C),
+	IMX_PINCTRL_PIN(MX25_PAD_GPIO_D),
+	IMX_PINCTRL_PIN(MX25_PAD_GPIO_E),
+	IMX_PINCTRL_PIN(MX25_PAD_GPIO_F),
+	IMX_PINCTRL_PIN(MX25_PAD_EXT_ARMCLK),
+	IMX_PINCTRL_PIN(MX25_PAD_UPLL_BYPCLK),
+	IMX_PINCTRL_PIN(MX25_PAD_VSTBY_REQ),
+	IMX_PINCTRL_PIN(MX25_PAD_VSTBY_ACK),
+	IMX_PINCTRL_PIN(MX25_PAD_POWER_FAIL),
+	IMX_PINCTRL_PIN(MX25_PAD_CLKO),
+	IMX_PINCTRL_PIN(MX25_PAD_BOOT_MODE0),
+	IMX_PINCTRL_PIN(MX25_PAD_BOOT_MODE1),
+};
+
+static struct imx_pinctrl_soc_info imx25_pinctrl_info = {
+	.pins = imx25_pinctrl_pads,
+	.npins = ARRAY_SIZE(imx25_pinctrl_pads),
+};
+
+static struct of_device_id imx25_pinctrl_of_match[] = {
+	{ .compatible = "fsl,imx25-iomuxc", },
+	{ /* sentinel */ }
+};
+
+static int imx25_pinctrl_probe(struct platform_device *pdev)
+{
+	return imx_pinctrl_probe(pdev, &imx25_pinctrl_info);
+}
+
+static struct platform_driver imx25_pinctrl_driver = {
+	.driver = {
+		.name = "imx25-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(imx25_pinctrl_of_match),
+	},
+	.probe = imx25_pinctrl_probe,
+	.remove = imx_pinctrl_remove,
+};
+
+static int __init imx25_pinctrl_init(void)
+{
+	return platform_driver_register(&imx25_pinctrl_driver);
+}
+arch_initcall(imx25_pinctrl_init);
+
+static void __exit imx25_pinctrl_exit(void)
+{
+	platform_driver_unregister(&imx25_pinctrl_driver);
+}
+module_exit(imx25_pinctrl_exit);
+MODULE_AUTHOR("Denis Carikli <denis@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Freescale IMX25 pinctrl driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux