Add IC, SI and SIRAM document of QE to
Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
Signed-off-by: Zhao Qiang <qiang.zhao@xxxxxxx>
---
.../devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt | 53 ++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
index 4f89302..5e00fc8 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
@@ -69,6 +69,59 @@ Example:
};
};
+* Interrupt Controller (IC)
+
+Required properties:
+- compatible : should be "fsl,qe-ic".
+- reg : Address range of IC register set.
+- interrupts : interrupts generated by the device.
+
+Example:
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78
+ };
+
+* Serial Interface Block (SI)
+
+The SI manages the routing of eight TDM lines to the QE block serial drivers
+, the MCC and the UCCs, for receive and transmit.
+
+Required properties:
+- compatible : should be "fsl,qe-si".
+- reg : Address range of SI register set.
+
+Example:
+
+ si1: si@700 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,qe-si";
+ reg = <0x700 0x80>;
+ };
+
+* Serial Interface Block RAM(SIRAM)
+
+store the routing entries of SI
+
+Required properties:
+- compatible : should be "fsl,qe-siram".
+- reg : Address range of SI RAM.
+
+Example:
+
+ siram1: siram@1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-siram";
+ reg = <0x1000 0x800>;
+ };
+
* QE Firmware Node
This node defines a firmware binary that is embedded in the device tree, for
--
2.1.0.27.g96db324
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
