[PATCH v3 01/14] dt/bindings: Add bindings for PIC32 interrupt controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




From: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>

Document the devicetree bindings for the interrupt controller on
Microchip PIC32 class devices.

Signed-off-by: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>
Signed-off-by: Joshua Henderson <joshua.henderson@xxxxxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
 .../interrupt-controller/microchip,pic32-evic.txt  |   58 ++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt b/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
new file mode 100644
index 0000000..6f4389a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,pic32-evic.txt
@@ -0,0 +1,58 @@
+Microchip PIC32 Interrupt Controller
+====================================
+
+The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller
+(EVIC). It handles internal and external interrupts and provides support for
+irq type and polarity.
+
+Required properties
+-------------------
+
+- compatible: Should be "microchip,pic32mzda-evic"
+
+- reg: Specifies physical base address and size of register range.
+
+- interrupt-controller: Identifies the node as an interrupt controller.
+
+- #interrupt cells: Specifies the number of cells used to encode an interrupt
+source connected to this controller. The value shall be 2 and interrupt
+descriptor shall have the following format:
+	<hw_irq irq_type>
+
+hw_irq - represents the hardware interrupt number as in the data sheet.
+
+irq_type - is used to describe the type and polarity of an interrupt. For
+internal interrupts use IRQ_TYPE_EDGE_RISING for non persistent interrupts and
+IRQ_TYPE_LEVEL_HIGH for persistent interrupts. For external interrupts use
+IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING to select the desired polarity.
+
+Example
+-------
+
+evic: interrupt-controller@1f810000 {
+        compatible = "microchip,pic32mzda-evic";
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        reg = <0x1f810000 0x1000>;
+};
+
+Each device must request his interrupt line with the associated priority and
+polarity
+
+Internal interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+	...
+	interrupts = <113 IRQ_TYPE_LEVEL_HIGH>;
+	...
+};
+
+External interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+	...
+	interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+	...
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux