On Mon, Jan 04, 2016 at 12:34:44PM +0000, Harvey Hunt wrote: > diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts > index 9fcb9e7..782258c 100644 > --- a/arch/mips/boot/dts/ingenic/ci20.dts > +++ b/arch/mips/boot/dts/ingenic/ci20.dts As I noted on patch 1, you need to send this to linux-mips + Ralf. > @@ -42,3 +42,66 @@ > &uart4 { > status = "okay"; > }; > + > +&nemc { > + status = "okay"; > + > + nandc: nand-controller@1 { > + compatible = "ingenic,jz4780-nand"; > + reg = <1 0 0x1000000>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + ingenic,bch-controller = <&bch>; > + > + ingenic,nemc-tAS = <10>; > + ingenic,nemc-tAH = <5>; > + ingenic,nemc-tBP = <10>; > + ingenic,nemc-tAW = <15>; > + ingenic,nemc-tSTRV = <100>; > + > + nand@1 { > + reg = <1>; > + > + nand-ecc-step-size = <1024>; > + nand-ecc-strength = <24>; > + nand-ecc-mode = "hw"; > + nand-on-flash-bbt; > + > + partitions { > + #address-cells = <2>; > + #size-cells = <2>; This binding was updated, so you need: compatible = "fixed-partitions"; Brian > + > + partition@0 { > + label = "u-boot-spl"; > + reg = <0x0 0x0 0x0 0x800000>; > + }; > + > + partition@0x800000 { > + label = "u-boot"; > + reg = <0x0 0x800000 0x0 0x200000>; > + }; > + > + partition@0xa00000 { > + label = "u-boot-env"; > + reg = <0x0 0xa00000 0x0 0x200000>; > + }; > + > + partition@0xc00000 { > + label = "boot"; > + reg = <0x0 0xc00000 0x0 0x4000000>; > + }; > + > + partition@0x8c00000 { > + label = "system"; > + reg = <0x0 0x4c00000 0x1 0xfb400000>; > + }; > + }; > + }; > + }; > +}; > + > +&bch { > + status = "okay"; > +}; Brian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html