Re: [PATCH v2 2/3] drm/rockchip: vop: add rk3229 vop support

Mark yao <mark.yao@xxxxxxxxxxxxxx> · Wed, 06 Jan 2016 08:56:48 +0800

On 2016年01月05日 11:58, Yakir Yang wrote:
RK3229 registers layout is simalar to RK3288 layout, only the
interruput registers is different to RK3288.

RK3229 support two overlay plane and one hwc plane, max output
resolution is 4K. it support IOMMU, and its IOMMU same as rk3288's.

Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
---
Changes in v2:
- Separate the write-mask changes out, and remove the DUMMY_INTR marcos (Heiko)

  drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 110 ++++++++++++++++++++++++++++
  drivers/gpu/drm/rockchip/rockchip_vop_reg.h |  90 +++++++++++++++++++++++
  2 files changed, 200 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
index 7fbaf76..f1358f9 100644
--- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
+++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c
@@ -191,6 +191,114 @@ static const struct vop_data rk3288_vop = {
  	.win_size = ARRAY_SIZE(rk3288_vop_win_data),
  };
  
+static const struct vop_scl_extension rk3229_win_full_scl_ext = {
+	.cbcr_vsd_mode = VOP_REG(RK3229_WIN0_CTRL1, 0x1, 31),
+	.cbcr_vsu_mode = VOP_REG(RK3229_WIN0_CTRL1, 0x1, 30),
+	.cbcr_hsd_mode = VOP_REG(RK3229_WIN0_CTRL1, 0x3, 28),
+	.cbcr_ver_scl_mode = VOP_REG(RK3229_WIN0_CTRL1, 0x3, 26),
+	.cbcr_hor_scl_mode = VOP_REG(RK3229_WIN0_CTRL1, 0x3, 24),
+	.yrgb_vsd_mode = VOP_REG(RK3229_WIN0_CTRL1, 0x1, 23),
+	.yrgb_vsu_mode = VOP_REG(RK3229_WIN0_CTRL1, 0x1, 22),
+	.yrgb_hsd_mode = VOP_REG(RK3229_WIN0_CTRL1, 0x3, 20),
+	.yrgb_ver_scl_mode = VOP_REG(RK3229_WIN0_CTRL1, 0x3, 18),
+	.yrgb_hor_scl_mode = VOP_REG(RK3229_WIN0_CTRL1, 0x3, 16),
+	.line_load_mode = VOP_REG(RK3229_WIN0_CTRL1, 0x1, 15),
+	.cbcr_axi_gather_num = VOP_REG(RK3229_WIN0_CTRL1, 0x7, 12),
+	.yrgb_axi_gather_num = VOP_REG(RK3229_WIN0_CTRL1, 0xf, 8),
+	.vsd_cbcr_gt2 = VOP_REG(RK3229_WIN0_CTRL1, 0x1, 7),
+	.vsd_cbcr_gt4 = VOP_REG(RK3229_WIN0_CTRL1, 0x1, 6),
+	.vsd_yrgb_gt2 = VOP_REG(RK3229_WIN0_CTRL1, 0x1, 5),
+	.vsd_yrgb_gt4 = VOP_REG(RK3229_WIN0_CTRL1, 0x1, 4),
+	.bic_coe_sel = VOP_REG(RK3229_WIN0_CTRL1, 0x3, 2),
+	.cbcr_axi_gather_en = VOP_REG(RK3229_WIN0_CTRL1, 0x1, 1),
+	.yrgb_axi_gather_en = VOP_REG(RK3229_WIN0_CTRL1, 0x1, 0),
+	.lb_mode = VOP_REG(RK3229_WIN0_CTRL0, 0x7, 5),
+};
+
+static const struct vop_scl_regs rk3229_win_full_scl = {
+	.ext = &rk3229_win_full_scl_ext,
+	.scale_yrgb_x = VOP_REG(RK3229_WIN0_SCL_FACTOR_YRGB, 0xffff, 0x0),
+	.scale_yrgb_y = VOP_REG(RK3229_WIN0_SCL_FACTOR_YRGB, 0xffff, 16),
+	.scale_cbcr_x = VOP_REG(RK3229_WIN0_SCL_FACTOR_CBR, 0xffff, 0x0),
+	.scale_cbcr_y = VOP_REG(RK3229_WIN0_SCL_FACTOR_CBR, 0xffff, 16),
+};
+
+static const struct vop_win_phy rk3229_win01_data = {
+	.scl = &rk3229_win_full_scl,
+	.data_formats = formats_win_full,
+	.nformats = ARRAY_SIZE(formats_win_full),
+	.enable = VOP_REG(RK3229_WIN0_CTRL0, 0x1, 0),
+	.format = VOP_REG(RK3229_WIN0_CTRL0, 0x7, 1),
+	.rb_swap = VOP_REG(RK3229_WIN0_CTRL0, 0x1, 12),
+	.act_info = VOP_REG(RK3229_WIN0_ACT_INFO, 0x1fff1fff, 0),
+	.dsp_info = VOP_REG(RK3229_WIN0_DSP_INFO, 0x0fff0fff, 0),
+	.dsp_st = VOP_REG(RK3229_WIN0_DSP_ST, 0x1fff1fff, 0),
+	.yrgb_mst = VOP_REG(RK3229_WIN0_YRGB_MST, 0xffffffff, 0),
+	.uv_mst = VOP_REG(RK3229_WIN0_CBR_MST, 0xffffffff, 0),
+	.yrgb_vir = VOP_REG(RK3229_WIN0_VIR, 0x3fff, 0),
+	.uv_vir = VOP_REG(RK3229_WIN0_VIR, 0x3fff, 16),
+	.src_alpha_ctl = VOP_REG(RK3229_WIN0_SRC_ALPHA_CTRL, 0xff, 0),
+	.dst_alpha_ctl = VOP_REG(RK3229_WIN0_DST_ALPHA_CTRL, 0xff, 0),
+};
+
+static const struct vop_win_data rk3229_vop_win_data[] = {
+	{ .base = 0x00, .phy = &rk3229_win01_data,
+	  .type = DRM_PLANE_TYPE_PRIMARY },
+	{ .base = 0x40, .phy = &rk3229_win01_data,
+	  .type = DRM_PLANE_TYPE_CURSOR },
+};
+
+static const struct vop_ctrl rk3229_ctrl_data = {
+	.cfg_done = VOP_REG(RK3229_REG_CFG_DONE, 0x1, 0),
+	.standby = VOP_REG(RK3229_SYS_CTRL, 0x1, 22),
+	.gate_en = VOP_REG(RK3229_SYS_CTRL, 0x1, 23),
+	.mmu_en = VOP_REG(RK3229_SYS_CTRL, 0x1, 20),
+	.rgb_en = VOP_REG(RK3229_SYS_CTRL, 0x1, 12),
+	.hdmi_en = VOP_REG(RK3229_SYS_CTRL, 0x1, 13),
+	.edp_en = VOP_REG(RK3229_SYS_CTRL, 0x1, 14),
+	.mipi_en = VOP_REG(RK3229_SYS_CTRL, 0x1, 15),
+	.data_blank = VOP_REG(RK3229_DSP_CTRL0, 0x1, 19),
+	.out_mode = VOP_REG(RK3229_DSP_CTRL0, 0xf, 0),
+	.pin_pol = VOP_REG(RK3229_DSP_CTRL1, 0xf, 20),
+	.dither_up = VOP_REG(RK3229_DSP_CTRL1, 0x1, 6),
+	.htotal_pw = VOP_REG(RK3229_DSP_HTOTAL_HS_END, 0x1fff1fff, 0),
+	.hact_st_end = VOP_REG(RK3229_DSP_HACT_ST_END, 0x1fff1fff, 0),
+	.vtotal_pw = VOP_REG(RK3229_DSP_VTOTAL_VS_END, 0x1fff1fff, 0),
+	.vact_st_end = VOP_REG(RK3229_DSP_VACT_ST_END, 0x1fff1fff, 0),
+	.hpost_st_end = VOP_REG(RK3229_POST_DSP_HACT_INFO, 0x1fff1fff, 0),
+	.vpost_st_end = VOP_REG(RK3229_POST_DSP_VACT_INFO, 0x1fff1fff, 0),
+};

Hi Yakir

RK3229 registers layout is simalar to RK3288 layout, is possible to reuse rk3288 register table?

rk3229_ctrl_data & rk3229_win01_data seems same as rk3288_ctrl_data & rk3288_win01_data.

Thanks.

--
Ｍark Yao


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html






