Re: [PATCH] mtd: spi-nor: add hisilicon spi-nor flash controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Rob,
   Happy new year to you! Thank you for your patience.

On 2016/1/1 6:26, Rob Herring wrote:
> On Wed, Dec 30, 2015 at 10:26:11AM +0800, Jiancheng Xue wrote:
>> add hisilicon spi-nor flash controller driver
>>
>> Signed-off-by: Binquan Peng <pengbinquan@xxxxxxxxxx>
>> Signed-off-by: Jiancheng Xue <xuejiancheng@xxxxxxxxxx>
>> ---
>>  .../devicetree/bindings/spi/spi-hisi-sfc.txt       |  24 +
>>  drivers/mtd/spi-nor/Kconfig                        |   7 +
>>  drivers/mtd/spi-nor/Makefile                       |   1 +
>>  drivers/mtd/spi-nor/hisi-sfc.c                     | 505 +++++++++++++++++++++
>>  4 files changed, 537 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/spi/spi-hisi-sfc.txt
>>  create mode 100644 drivers/mtd/spi-nor/hisi-sfc.c
>>
>> diff --git a/Documentation/devicetree/bindings/spi/spi-hisi-sfc.txt b/Documentation/devicetree/bindings/spi/spi-hisi-sfc.txt
>> new file mode 100644
>> index 0000000..170885a
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/spi-hisi-sfc.txt
>> @@ -0,0 +1,24 @@
>> +HiSilicon SPI-NOR Flash Controller
>> +
>> +Required properties:
>> +- compatible : Should be "hisilicon,hisi-sfc".
>> +- address-cells: number of cells required to define a chip select
>> +        address on the SPI bus. Should be set to 1. See spi-bus.txt.
>> +- size-cells:Should be 0.
> 
> How about some consistency in the spacing around the ':'.

OK. I'll correct it in next version. Thank you.

> 
>> +- reg : Offset and length of the register set for the controller device.
>> +- reg-names: Must include the following two entries:"control","memory".
>                                                        ^         ^
> Spaces needed.

OK

> 
>> +- clocks: handle to spi-nor flash controller clock.
>> +
>> +Example:
>> +spi-nor-controller@14000000 {
>> +	compatible = "hisilicon,hisi-sfc";
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>> +	reg = <0x10000000 0x1000>, <0x14000000 0x1000000>;
>> +	reg-names = "control", "memory";
>> +	clocks = <&clock HI3519_FMC_CLK>;
>> +	spi-nor@0 {
>> +		compatible = "jedec,spi-nor";
>> +		reg = <0>;
>> +	};
>> +};
>> diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
>> index 2fe2a7e..7fe1564 100644
>> --- a/drivers/mtd/spi-nor/Kconfig
>> +++ b/drivers/mtd/spi-nor/Kconfig
>> @@ -30,6 +30,12 @@ config SPI_FSL_QUADSPI
>>  	  This controller does not support generic SPI. It only supports
>>  	  SPI NOR.
>>  
>> +config SPI_HISI_SFC
>> +	tristate "Hisilicon SPI-NOR Flash Controller(SFC)"
>> +	depends on ARCH_HISI
>> +	help
>> +	  This enables support for hisilicon SPI-NOR flash controller.
>> +
>>  config SPI_NXP_SPIFI
>>  	tristate "NXP SPI Flash Interface (SPIFI)"
>>  	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
>> @@ -41,4 +47,5 @@ config SPI_NXP_SPIFI
>>  	  Flash. Enable this option if you have a device with a SPIFI
>>  	  controller and want to access the Flash as a mtd device.
>>  
>> +
> 
> Drop this spurious change.

OK. Thank you. I'll pay more attention to this later.

> 
>>  endif # MTD_SPI_NOR
>> diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
>> index e53333e..8cea3c5 100644
>> --- a/drivers/mtd/spi-nor/Makefile
>> +++ b/drivers/mtd/spi-nor/Makefile
>> @@ -1,3 +1,4 @@
>>  obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
>>  obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-quadspi.o
>> +obj-$(CONFIG_SPI_HISI_SFC)	+= hisi-sfc.o
>>  obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
>> diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/hisi-sfc.c
>> new file mode 100644
>> index 0000000..fd9649a
>> --- /dev/null
>> +++ b/drivers/mtd/spi-nor/hisi-sfc.c
>> @@ -0,0 +1,505 @@
>> +/* HiSilicon SPI Nor Flash Controller Driver
>> + *
>> + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +#include <linux/slab.h>
>> +#include <linux/module.h>
>> +#include <linux/clk.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/mtd/mtd.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/mtd/spi-nor.h>
> 
> Some say to alphabetize includes. I don't care so much, but at least 
> group subdirectories.

Sorry about that. I'll reorder them.

> 
> Rob
> 
> .
> 

Jiancheng

.

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux