[PATCH 10/10] [media] tvp5150: Configure data interface via pdata or DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




The video decoder supports either 8-bit 4:2:2 YUV with discrete syncs
or 8-bit ITU-R BT.656 with embedded syncs output format but currently
BT.656 it's always reported. Allow to configure the format to use via
either platform data or a device tree definition.

Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>

---

 drivers/media/i2c/tvp5150.c | 61 +++++++++++++++++++++++++++++++++++++++++++--
 include/media/i2c/tvp5150.h |  5 ++++
 2 files changed, 64 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index fed89a811ab7..8bce45a6e264 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/of_gpio.h>
+#include <linux/of_graph.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/videodev2.h>
@@ -15,6 +16,7 @@
 #include <media/v4l2-device.h>
 #include <media/i2c/tvp5150.h>
 #include <media/v4l2-ctrls.h>
+#include <media/v4l2-of.h>
 
 #include "tvp5150_reg.h"
 
@@ -39,6 +41,7 @@ struct tvp5150 {
 	struct media_pad pad;
 	struct v4l2_ctrl_handler hdl;
 	struct v4l2_rect rect;
+	struct tvp5150_platform_data *pdata;
 
 	v4l2_std_id norm;	/* Current set standard */
 	u32 input;
@@ -757,6 +760,7 @@ static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
 {
 	struct tvp5150 *decoder = to_tvp5150(sd);
+	struct tvp5150_platform_data *pdata = decoder->pdata;
 
 	/* Initializes TVP5150 to its default values */
 	tvp5150_write_inittab(sd, tvp5150_init_default);
@@ -774,6 +778,10 @@ static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
 	v4l2_ctrl_handler_setup(&decoder->hdl);
 
 	tvp5150_set_std(sd, decoder->norm);
+
+	if (pdata && pdata->bus_type == V4L2_MBUS_PARALLEL)
+		tvp5150_write(sd, TVP5150_DATA_RATE_SEL, 0x40);
+
 	return 0;
 };
 
@@ -940,6 +948,16 @@ static int tvp5150_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 static int tvp5150_g_mbus_config(struct v4l2_subdev *sd,
 				 struct v4l2_mbus_config *cfg)
 {
+	struct tvp5150_platform_data *pdata = to_tvp5150(sd)->pdata;
+
+	if (pdata) {
+		cfg->type = pdata->bus_type;
+		cfg->flags = pdata->parallel_flags;
+
+		return 0;
+	}
+
+	/* Default values if no platform data was provided */
 	cfg->type = V4L2_MBUS_BT656;
 	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING
 		   | V4L2_MBUS_FIELD_EVEN_LOW | V4L2_MBUS_DATA_ACTIVE_HIGH;
@@ -986,13 +1004,20 @@ static int tvp5150_enum_frame_size(struct v4l2_subdev *sd,
 
 static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
 {
+	struct tvp5150_platform_data *pdata = to_tvp5150(sd)->pdata;
+	/* Output format: 8-bit ITU-R BT.656 with embedded syncs */
+	int val = 0x09;
+
+	/* Output format: 8-bit 4:2:2 YUV with discrete sync */
+	if (pdata && pdata->bus_type == V4L2_MBUS_PARALLEL)
+		val = 0x0d;
+
 	/* Initializes TVP5150 to its default values */
 	/* # set PCLK (27MHz) */
 	tvp5150_write(sd, TVP5150_CONF_SHARED_PIN, 0x00);
 
-	/* Output format: 8-bit ITU-R BT.656 with embedded syncs */
 	if (enable)
-		tvp5150_write(sd, TVP5150_MISC_CTL, 0x09);
+		tvp5150_write(sd, TVP5150_MISC_CTL, val);
 	else
 		tvp5150_write(sd, TVP5150_MISC_CTL, 0x00);
 
@@ -1228,11 +1253,42 @@ static inline int tvp5150_init(struct i2c_client *c)
 	return 0;
 }
 
+static struct tvp5150_platform_data *tvp5150_get_pdata(struct device *dev)
+{
+	struct tvp5150_platform_data *pdata = dev_get_platdata(dev);
+	struct v4l2_of_endpoint bus_cfg;
+	struct device_node *ep;
+
+	if (pdata)
+		return pdata;
+
+	if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
+		pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+		if (!pdata)
+			return NULL;
+
+		ep = of_graph_get_next_endpoint(dev->of_node, NULL);
+		if (!ep)
+			return NULL;
+
+		v4l2_of_parse_endpoint(ep, &bus_cfg);
+
+		pdata->bus_type = bus_cfg.bus_type;
+		pdata->parallel_flags = bus_cfg.bus.parallel.flags;
+
+		of_node_put(ep);
+		return pdata;
+	}
+
+	return NULL;
+}
+
 static int tvp5150_probe(struct i2c_client *c,
 			 const struct i2c_device_id *id)
 {
 	struct tvp5150 *core;
 	struct v4l2_subdev *sd;
+	struct tvp5150_platform_data *pdata = tvp5150_get_pdata(&c->dev);
 	int res;
 
 	/* Check if the adapter supports the needed features */
@@ -1262,6 +1318,7 @@ static int tvp5150_probe(struct i2c_client *c,
 	if (res < 0)
 		return res;
 
+	core->pdata = pdata;
 	core->norm = V4L2_STD_ALL;	/* Default is autodetect */
 	core->input = TVP5150_COMPOSITE1;
 	core->enable = 1;
diff --git a/include/media/i2c/tvp5150.h b/include/media/i2c/tvp5150.h
index 649908a25605..e4cda0c843df 100644
--- a/include/media/i2c/tvp5150.h
+++ b/include/media/i2c/tvp5150.h
@@ -30,4 +30,9 @@
 #define TVP5150_NORMAL       0
 #define TVP5150_BLACK_SCREEN 1
 
+struct tvp5150_platform_data {
+	enum v4l2_mbus_type bus_type;
+	unsigned int parallel_flags;
+};
+
 #endif
-- 
2.4.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux