Hi Lee, On Thu, Dec 17, 2015 at 12:32 AM, Chen-Yu Tsai <wens@xxxxxxxx> wrote: > Hi everyone, > > This is v6 of the AXP223 PMIC series. v6 fixes the address of the AXP223 > in the DT. Hope this series makes it into 4.5, and we can then support > even more AXP PMICs in 4.6+. > > Lee, can you take the first 7 patches. Once they're in, Maxime can take > the DTS patches. We're at -rc8. Any chance the first 7 patches make the next release? Thanks ChenYu > > Changes since v5: > > - Correct AXP223 address to 0x3a3. > > Changes since v4: > > - Get rid of second parameter of axp20x_match_device() (new patch 2) > > - Match against dev->driver->of_match_table, so the entirety of > axp20x_match_device() can be kept in the core. (new patch 3) > > - Move *_device_id tables to bottom of the driver, right above driver > declaration. (patch 4 & 6) > > - Remove extra whitespaces while moving i2c specific code (patch 4) > > - Remove leftover whitespace and code style issues in axp20x core > (new patch 5) > > - Remove extra whitespaces in rsb specific code (patch 6) > > Changes since v3: > > - Removed settings for axp223 reg_rtc_ldo from board dts files that > are already in axp22x.dtsi. The name is kept. > > - Dropped simplefb label and defconfig patches, as they are merged. > > Changes since v2: > > - s/It's/Its/ for the commit messages of patches 5 and 7 > > - Add Rob's Acked-by for patch 1 > > Changes since v1: > > - Dropped NMI interrupt controller dts patch (Merged) > > - Change MFD_AXP20X to represent the axp20x core, and drop MFD_AXP20X_CORE > > - Keep the axp20x core bits named axp20x.c > > - Add patch 7 to add AXP223 to sun8i-q8-common.dtsi > > - Add patch 8 & 9 to update defconfigs > > - Make axp20x drivers tristate and buildable as modules > > - Drop "_sunxi" substring from identifiers in axp20x-rsb driver > > > This series adds support for the Reduced Serial Bus based AXP223 PMIC. > The AXP223 is functionally identical to the AXP221, which we already > support. Only some default values for the regulators are different. > The defaults fit their recommended application, paired with different > SoCs. > > Patch 1 adds AXP223 to the list of supported chips in the DT binding. > > Patch 2 gets rid of the extra "struct device *" parameter from > axp20x_match_device(). > > Patch 3 makes axp20x_match_device() use dev->driver->of_match_table, > so the function can be library-ized without modification. > > Patch 4 splits the axp20x mfd driver into 2 parts, a core library, and > an I2C driver. > > Patch 5 cleans up some leftover whitespace issues in axp20x core. > > Patch 6 adds an RSB based driver for the AXP223. > > Patch 7 adds support for the AXP223 regulators > > Patch 8 enables the AXP223 PMIC and its regulators for the Sinlinx > SinA33. > > Patch 9 enables the AXP223 PMIC and its regulators for A23/A33 based > Q8 tablet devices. > > > Regards > ChenYu > > > Chen-Yu Tsai (9): > mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindings > mfd: axp20x: Remove second struct device * parameter for > axp20x_match_device() > mfd: axp20x: use dev->driver->of_match_table in axp20x_match_device() > mfd: axp20x: Split the driver into core and i2c bits > mfd: axp20x: Whitespace, open parenthesis alignment code style fixes > mfd: axp20x: Add support for RSB based AXP223 PMIC > regulator: axp20x: Support new AXP223 PMIC > ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator > nodes > ARM: dts: sun8i: q8-common: Add AXP223 PMIC device and regulator nodes > > Documentation/devicetree/bindings/mfd/axp20x.txt | 7 +- > arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 76 ++++++++++++++++- > arch/arm/boot/dts/sun8i-q8-common.dtsi | 83 +++++++++++++++++- > drivers/mfd/Kconfig | 25 ++++-- > drivers/mfd/Makefile | 2 + > drivers/mfd/axp20x-i2c.c | 102 +++++++++++++++++++++++ > drivers/mfd/axp20x-rsb.c | 78 +++++++++++++++++ > drivers/mfd/axp20x.c | 101 +++++----------------- > drivers/regulator/axp20x-regulator.c | 3 + > include/linux/mfd/axp20x.h | 34 +++++++- > 10 files changed, 418 insertions(+), 93 deletions(-) > create mode 100644 drivers/mfd/axp20x-i2c.c > create mode 100644 drivers/mfd/axp20x-rsb.c > > -- > 2.6.4 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
