[PATCHv7 5/5] drm: bridge: anx78xx: Add anx78xx driver support by analogix.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




At the moment it only supports ANX7814.

The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
designed for portable devices. The ANX7814 transforms the HDMI output of
an application processor to MyDP or DisplayPort.

The driver supports HDMI to DP pass-through mode and works using external
adapters that converts MyDP or DisplayPort to HDMI or DVI.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
---

Changes since last version (requested by Dan Carpenter)
- Fix off by one loops
- Change "errcnt" to retry_cnt
- Replace -1 returns as -1 is never a correct error code.
- Add define AUX_CH_BUFFER_SIZE
- Left out the default case in sp_tx_edid_read as is not reachable.
- Change loop to compare memory, use memcmp instead (sp_check_with_pre_edid)
- Remove unneeded else statement and pull the code in one indent level (sp_config_video_output)
- Fix sp_hdmi_audio_samplechg_int function as is off by one.
- Fix precendence error in sp_config_audio_output.

Changes since v5:
- Fix auto build test ERROR (anx78xx->bridge.of_node = client->dev.of_node)
- Remove more magic numbers and use DP_ defines from hdmi.h
- Use common dp/hdmi defines instead of redefine it.
- Improve a bit the documentation of the driver.
- Improve debug messages.
- Use devm to request the irq.

 drivers/gpu/drm/bridge/Kconfig                   |    2 +
 drivers/gpu/drm/bridge/Makefile                  |    1 +
 drivers/gpu/drm/bridge/anx78xx/Kconfig           |    5 +
 drivers/gpu/drm/bridge/anx78xx/Makefile          |    4 +
 drivers/gpu/drm/bridge/anx78xx/anx78xx.h         |   44 +
 drivers/gpu/drm/bridge/anx78xx/anx78xx_main.c    |  334 +++
 drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.c | 3194 ++++++++++++++++++++++
 drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.h |  110 +
 drivers/gpu/drm/bridge/anx78xx/slimport_tx_reg.h |  737 +++++
 9 files changed, 4431 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/anx78xx/Kconfig
 create mode 100644 drivers/gpu/drm/bridge/anx78xx/Makefile
 create mode 100644 drivers/gpu/drm/bridge/anx78xx/anx78xx.h
 create mode 100644 drivers/gpu/drm/bridge/anx78xx/anx78xx_main.c
 create mode 100644 drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.c
 create mode 100644 drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.h
 create mode 100644 drivers/gpu/drm/bridge/anx78xx/slimport_tx_reg.h

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 6dddd39..1d92bc1 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -41,4 +41,6 @@ config DRM_PARADE_PS8622
 	---help---
 	  Parade eDP-LVDS bridge chip driver.
 
+source "drivers/gpu/drm/bridge/anx78xx/Kconfig"
+
 endmenu
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index d4e28be..0e9fdb4 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o
 obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw_hdmi-ahb-audio.o
 obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
 obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
+obj-$(CONFIG_DRM_ANX78XX) += anx78xx/
diff --git a/drivers/gpu/drm/bridge/anx78xx/Kconfig b/drivers/gpu/drm/bridge/anx78xx/Kconfig
new file mode 100644
index 0000000..5be362d
--- /dev/null
+++ b/drivers/gpu/drm/bridge/anx78xx/Kconfig
@@ -0,0 +1,5 @@
+config DRM_ANX78XX
+	tristate "Analogix ANX78XX bridge"
+	help
+	  ANX78XX is a HD video transmitter chip over micro-USB
+	  connector for smartphone device.
diff --git a/drivers/gpu/drm/bridge/anx78xx/Makefile b/drivers/gpu/drm/bridge/anx78xx/Makefile
new file mode 100644
index 0000000..a843733
--- /dev/null
+++ b/drivers/gpu/drm/bridge/anx78xx/Makefile
@@ -0,0 +1,4 @@
+obj-${CONFIG_DRM_ANX78XX} :=  anx78xx.o
+
+anx78xx-y += anx78xx_main.o
+anx78xx-y += slimport_tx_drv.o
diff --git a/drivers/gpu/drm/bridge/anx78xx/anx78xx.h b/drivers/gpu/drm/bridge/anx78xx/anx78xx.h
new file mode 100644
index 0000000..6548918
--- /dev/null
+++ b/drivers/gpu/drm/bridge/anx78xx/anx78xx.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright(c) 2015, Analogix Semiconductor. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ANX78xx_H
+#define __ANX78xx_H
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/gpio/consumer.h>
+
+#include <drm/drm_crtc.h>
+
+struct anx78xx_platform_data {
+	struct gpio_desc *gpiod_pd;
+	struct gpio_desc *gpiod_reset;
+	struct gpio_desc *gpiod_v10;
+};
+
+struct anx78xx {
+	struct drm_bridge bridge;
+	struct i2c_client *client;
+	struct anx78xx_platform_data *pdata;
+	struct delayed_work work;
+	struct workqueue_struct *workqueue;
+};
+
+void anx78xx_poweron(struct anx78xx *data);
+void anx78xx_poweroff(struct anx78xx *data);
+bool anx78xx_cable_is_detected(struct anx78xx *anx78xx);
+
+#endif
diff --git a/drivers/gpu/drm/bridge/anx78xx/anx78xx_main.c b/drivers/gpu/drm/bridge/anx78xx/anx78xx_main.c
new file mode 100644
index 0000000..0101c23
--- /dev/null
+++ b/drivers/gpu/drm/bridge/anx78xx/anx78xx_main.c
@@ -0,0 +1,334 @@
+/*
+ * Copyright(c) 2015, Analogix Semiconductor. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <drm/drm_dp_helper.h>
+
+#include <linux/async.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/types.h>
+
+#include "anx78xx.h"
+#include "slimport_tx_drv.h"
+
+void anx78xx_poweron(struct anx78xx *anx78xx)
+{
+	struct anx78xx_platform_data *pdata = anx78xx->pdata;
+
+	if (pdata->gpiod_v10) {
+		gpiod_set_value_cansleep(pdata->gpiod_v10, 1);
+		usleep_range(1000, 2000);
+	}
+
+	gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
+	usleep_range(1000, 2000);
+
+	gpiod_set_value_cansleep(pdata->gpiod_pd, 0);
+	usleep_range(1000, 2000);
+
+	gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
+}
+
+void anx78xx_poweroff(struct anx78xx *anx78xx)
+{
+	struct anx78xx_platform_data *pdata = anx78xx->pdata;
+
+	if (pdata->gpiod_v10) {
+		gpiod_set_value_cansleep(pdata->gpiod_v10, 0);
+		usleep_range(1000, 2000);
+	}
+
+	gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
+	usleep_range(1000, 2000);
+
+	gpiod_set_value_cansleep(pdata->gpiod_pd, 1);
+	usleep_range(1000, 2000);
+}
+
+static int anx78xx_init_gpio(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	struct anx78xx_platform_data *pdata = anx78xx->pdata;
+
+	/* gpio for chip power down */
+	pdata->gpiod_pd = devm_gpiod_get(dev, "pd", GPIOD_OUT_HIGH);
+	if (IS_ERR(pdata->gpiod_pd)) {
+		dev_err(dev, "unable to claim pd gpio\n");
+		return PTR_ERR(pdata->gpiod_pd);
+	}
+
+	/* gpio for chip reset */
+	pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(pdata->gpiod_reset)) {
+		dev_err(dev, "unable to claim reset gpio\n");
+		return PTR_ERR(pdata->gpiod_reset);
+	}
+
+	/* gpio for V10 power control */
+	pdata->gpiod_v10 = devm_gpiod_get_optional(dev, "v10", GPIOD_OUT_LOW);
+	if (IS_ERR(pdata->gpiod_v10)) {
+		dev_err(dev, "unable to claim v10 gpio\n");
+		return PTR_ERR(pdata->gpiod_v10);
+	}
+
+	return 0;
+}
+
+/*
+ * HPD IRQ Event: HPD pulse width greater than 0.25ms but narrower than 2ms
+ * Hot Unplug Event: HPD pulse stays low longer than 2ms.
+ *
+ * AP just monitor HPD pulse high in this irq. If HPD is high, the driver
+ * will power on the chip, and then the driver controls when to power down
+ * the chip, if HPD event is HPD IRQ, the driver deals with IRQ event from
+ * downstream, finally, if HPD event is Hot Plug, the driver power down the
+ * chip.
+ */
+static irqreturn_t anx78xx_cable_isr(int irq, void *data)
+{
+	struct anx78xx *anx78xx = data;
+
+	queue_delayed_work(anx78xx->workqueue, &anx78xx->work, 0);
+
+	return IRQ_HANDLED;
+}
+
+static void anx78xx_work_func(struct work_struct *work)
+{
+	struct anx78xx *anx78xx = container_of(work, struct anx78xx,
+					       work.work);
+
+	if (sp_main_process(anx78xx))
+		queue_delayed_work(anx78xx->workqueue, &anx78xx->work,
+				   msecs_to_jiffies(500));
+	else
+		cancel_delayed_work(&anx78xx->work);
+}
+
+static inline struct anx78xx *bridge_to_anx78xx(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct anx78xx, bridge);
+}
+
+static int anx78xx_bridge_attach(struct drm_bridge *bridge)
+{
+	return 0;
+}
+
+static bool anx78xx_bridge_mode_fixup(struct drm_bridge *bridge,
+				      const struct drm_display_mode *mode,
+				      struct drm_display_mode *adjusted_mode)
+{
+	struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+
+	dev_dbg(&anx78xx->client->dev, "mode_fixup %d<%d; %d; %d\n",
+		sp_get_link_bandwidth_from_edid(anx78xx), DP_LINK_BW_5_4,
+		mode->clock, mode->flags & DRM_MODE_FLAG_INTERLACE);
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return false;
+
+	/* Max 720p at 2.7 Ghz, one lane */
+	if (sp_get_link_bandwidth_from_edid(anx78xx) < DP_LINK_BW_5_4 &&
+	    mode->clock > 74250)
+		return false;
+
+	/* Max 1200p at 5.4 Ghz, one lane */
+	if (mode->clock > 154000)
+		return false;
+
+	return true;
+}
+
+static void anx78xx_bridge_disable(struct drm_bridge *bridge) {}
+static void anx78xx_bridge_post_disable(struct drm_bridge *bridge) {}
+static void anx78xx_bridge_mode_set(struct drm_bridge *bridge,
+				    struct drm_display_mode *mode,
+				    struct drm_display_mode *adjusted_mode) {}
+static void anx78xx_bridge_pre_enable(struct drm_bridge *bridge) {}
+static void anx78xx_bridge_enable(struct drm_bridge *bridge) {}
+
+static const struct drm_bridge_funcs anx78xx_bridge_funcs = {
+	.attach		= anx78xx_bridge_attach,
+	.mode_fixup	= anx78xx_bridge_mode_fixup,
+	.disable	= anx78xx_bridge_disable,
+	.post_disable	= anx78xx_bridge_post_disable,
+	.mode_set	= anx78xx_bridge_mode_set,
+	.pre_enable	= anx78xx_bridge_pre_enable,
+	.enable		= anx78xx_bridge_enable,
+};
+
+static int anx78xx_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct anx78xx *anx78xx;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		dev_err(&client->dev, "i2c bus does not support the device\n");
+		return -ENODEV;
+	}
+
+	anx78xx = devm_kzalloc(&client->dev, sizeof(*anx78xx), GFP_KERNEL);
+	if (!anx78xx)
+		return -ENOMEM;
+
+	anx78xx->pdata = devm_kzalloc(&client->dev,
+				      sizeof(struct anx78xx_platform_data),
+				      GFP_KERNEL);
+	if (!anx78xx->pdata)
+		return -ENOMEM;
+
+#ifdef CONFIG_OF
+	anx78xx->bridge.of_node = client->dev.of_node;
+#endif
+	anx78xx->bridge.funcs = &anx78xx_bridge_funcs;
+	ret = drm_bridge_add(&anx78xx->bridge);
+	if (ret < 0) {
+		dev_err(&client->dev, "add drm bridge failed\n");
+		return ret;
+	}
+
+	anx78xx->client = client;
+
+	i2c_set_clientdata(client, anx78xx);
+
+	ret = anx78xx_init_gpio(anx78xx);
+	if (ret) {
+		dev_err(&client->dev, "failed to initialize gpios\n");
+		goto fail_remove_bridge;
+	}
+
+	INIT_DELAYED_WORK(&anx78xx->work, anx78xx_work_func);
+
+	anx78xx->workqueue = create_singlethread_workqueue("anx78xx_work");
+	if (!anx78xx->workqueue) {
+		dev_err(&client->dev, "failed to create work queue\n");
+		ret = -ENOMEM;
+		goto fail_remove_bridge;
+	}
+
+	ret = sp_system_init(anx78xx);
+	if (ret) {
+		dev_err(&client->dev, "failed to initialize anx78xx\n");
+		goto fail_free_wq;
+	}
+
+	ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					anx78xx_cable_isr,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"anx78xx-cable-det", anx78xx);
+	if (ret) {
+		dev_err(&client->dev, "failed to request threaded irq\n");
+		goto fail_free_wq;
+	}
+
+	ret = irq_set_irq_wake(client->irq, 1);
+	if (ret) {
+		dev_err(&client->dev, "failed to set irq wake\n");
+		goto fail_free_wq;
+	}
+
+	ret = enable_irq_wake(client->irq);
+	if (ret) {
+		dev_err(&client->dev, "failed to enable irq wake\n");
+		goto fail_free_wq;
+	}
+
+	/* enable driver */
+	queue_delayed_work(anx78xx->workqueue, &anx78xx->work, 0);
+
+	return 0;
+
+fail_free_wq:
+	destroy_workqueue(anx78xx->workqueue);
+fail_remove_bridge:
+	drm_bridge_remove(&anx78xx->bridge);
+	return ret;
+}
+
+static int anx78xx_i2c_remove(struct i2c_client *client)
+{
+	struct anx78xx *anx78xx = i2c_get_clientdata(client);
+
+	destroy_workqueue(anx78xx->workqueue);
+	drm_bridge_remove(&anx78xx->bridge);
+
+	return 0;
+}
+
+static int anx78xx_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct anx78xx *anx78xx = i2c_get_clientdata(client);
+
+	/* REVISIT: suspend */
+	cancel_delayed_work_sync(&anx78xx->work);
+	flush_workqueue(anx78xx->workqueue);
+	anx78xx_poweroff(anx78xx);
+	sp_variable_init(anx78xx);
+
+	return 0;
+}
+
+static int anx78xx_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct anx78xx *anx78xx = i2c_get_clientdata(client);
+
+	queue_delayed_work(anx78xx->workqueue, &anx78xx->work, 0);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(anx78xx_i2c_pm_ops,
+			anx78xx_i2c_suspend, anx78xx_i2c_resume);
+
+static const struct i2c_device_id anx78xx_id[] = {
+	{"anx7814", 0},
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(i2c, anx78xx_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id anx78xx_match_table[] = {
+	{.compatible = "analogix,anx7814",},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, anx78xx_match_table);
+#endif
+
+static struct i2c_driver anx78xx_driver = {
+	.driver = {
+		   .name = "anx7814",
+		   .pm = &anx78xx_i2c_pm_ops,
+		   .of_match_table = of_match_ptr(anx78xx_match_table),
+		  },
+	.probe = anx78xx_i2c_probe,
+	.remove = anx78xx_i2c_remove,
+	.id_table = anx78xx_id,
+};
+
+module_i2c_driver(anx78xx_driver);
+
+MODULE_DESCRIPTION("Slimport transmitter ANX78XX driver");
+MODULE_AUTHOR("Junhua Xia <jxia@xxxxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("1.1");
diff --git a/drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.c b/drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.c
new file mode 100644
index 0000000..6022f73
--- /dev/null
+++ b/drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.c
@@ -0,0 +1,3194 @@
+/*
+ * Copyright(c) 2015, Analogix Semiconductor. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <drm/drm_crtc.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_edid.h>
+
+#include <linux/delay.h>
+#include <linux/hdmi.h>
+#include <linux/types.h>
+
+#include "anx78xx.h"
+#include "slimport_tx_drv.h"
+
+#define XTAL_27M	270
+#define XTAL_CLK	XTAL_27M
+
+#define AUX_CH_BUFFER_SIZE	16
+
+struct slimport {
+	bool	hdcp_enabled;	/* HDCP control enable/ disable from AP */
+
+	u8	tx_test_bw;
+	bool	tx_test_lt;
+	bool	tx_test_edid;
+
+	u8	changed_bandwidth;
+
+	bool	need_clean_status;
+
+	u8	hdcp_error_count;
+	u8	hdcp_fail_count;
+	u8	audio_stable_count;	/* Audio stable counter */
+
+	u8	edid_blocks[2 * EDID_LENGTH];
+
+	bool	read_edid_flag;
+	bool	down_sample_en;
+
+	/* Infoframes */
+	union hdmi_infoframe	frame;
+
+	/* Interrupt status registers */
+	u8	common_int[4];
+	u8	dp_int;
+	u8	sp_hdmi_int[7];
+
+	enum sp_tx_state		tx_system_state;
+	enum audio_output_status	tx_ao_state;
+	enum video_output_status	tx_vo_state;
+	enum sp_tx_lt_status		tx_lt_state;
+	enum hdcp_status		hdcp_state;
+	enum repeater_status		repeater_state;
+};
+
+static struct slimport sp;
+
+static const u16 chipid_list[] = {
+	0x7802,
+	0x7806,
+	0x7810,
+	0x7812,
+	0x7814,
+	0x7816,
+	0x7818,
+};
+
+static void sp_hdmi_audio_samplechg_int(struct anx78xx *anx78xx);
+static void sp_hdmi_new_avi_int(struct anx78xx *anx78xx);
+static void sp_hdmi_new_vsi_int(struct anx78xx *anx78xx);
+static void sp_print_system_state(struct anx78xx *anx78xx,
+				  enum sp_tx_state state);
+static void sp_show_information(struct anx78xx *anx78xx);
+
+/**
+ * sp_reg_read: Read a value from a single register.
+ *
+ * @anx78xx: Device to read from.
+ * @addr: Address to read from.
+ * @reg: Register to be read from.
+ * @val: Pointer to store read value.
+ *
+ * A value of zero will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+static int sp_reg_read(struct anx78xx *anx78xx, u8 addr, u8 offset, u8 *val)
+{
+	int ret;
+	struct i2c_client *client = anx78xx->client;
+
+	client->addr = addr >> 1;
+
+	ret = i2c_smbus_read_byte_data(client, offset);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed to read i2c addr=%x\n", addr);
+		return ret;
+	}
+
+	*val = ret;
+
+	return 0;
+}
+
+/**
+ * sp_reg_write(): Write a value to a single register
+ *
+ * @anx78xx: Device to read from.
+ * @addr: Address to write to.
+ * @offset: Byte interpreted by slave.
+ * @val: Value to be written.
+ *
+ * A value of zero will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+static int sp_reg_write(struct anx78xx *anx78xx, u8 addr, u8 offset, u8 val)
+{
+	int ret;
+	struct i2c_client *client = anx78xx->client;
+
+	client->addr = addr >> 1;
+
+	ret = i2c_smbus_write_byte_data(client, offset, val);
+	if (ret < 0)
+		dev_err(&client->dev, "failed to write i2c addr=%x\n", addr);
+
+	return ret;
+}
+
+/**
+ * sp_reg_update_bits: Perform a read/modify/write cycle on the register.
+ *
+ * @anx78xx: Device to read from.
+ * @addr: Address to write to.
+ * @offset: Byte interpreted by slave.
+ * @mask: Bitmask to change.
+ * @val: New value for bitmask.
+ *
+ * Returns zero for success, a negative number on error.
+ */
+static int sp_reg_update_bits(struct anx78xx *anx78xx, u8 addr, u8 offset,
+			      u8 mask, u8 val)
+{
+	int ret;
+	u8 orig, tmp;
+
+	ret = sp_reg_read(anx78xx, addr, offset, &orig);
+	if (ret < 0)
+		return ret;
+
+	tmp = orig & ~mask;
+	tmp |= val & mask;
+
+	return sp_reg_write(anx78xx, addr, offset, tmp);
+}
+
+/**
+ * sp_reg_set_bits: Perform a read/write cycle to set bits in register.
+ *
+ * @anx78xx: Device to read from.
+ * @addr: Address to write to.
+ * @offset: Byte interpreted by slave.
+ * @mask: Bitmask to change.
+ *
+ * Returns zero for success, a negative number on error.
+ */
+static inline int sp_reg_set_bits(struct anx78xx *anx78xx, u8 addr,
+				  u8 offset, u8 mask)
+{
+	return sp_reg_update_bits(anx78xx, addr, offset, mask, mask);
+}
+
+/**
+ * sp_reg_clear_bits: Perform a read/write cycle to clear bits in register.
+ *
+ * @anx78xx: Device to read from.
+ * @addr: Address to write to.
+ * @offset: Byte interpreted by slave.
+ * @mask: Bitmask to change.
+ *
+ * Returns zero for success, a negative number on error.
+ */
+static inline int sp_reg_clear_bits(struct anx78xx *anx78xx, u8 addr,
+				    u8 offset, u8 mask)
+{
+	return sp_reg_update_bits(anx78xx, addr, offset, mask, 0);
+}
+
+static inline void sp_video_mute(struct anx78xx *anx78xx, bool enable)
+{
+	if (enable)
+		sp_reg_set_bits(anx78xx, TX_P2, SP_VID_CTRL1_REG,
+				SP_VIDEO_MUTE);
+	else
+		sp_reg_clear_bits(anx78xx, TX_P2, SP_VID_CTRL1_REG,
+				  SP_VIDEO_MUTE);
+}
+
+static inline void sp_hdmi_mute_audio(struct anx78xx *anx78xx, bool enable)
+{
+	if (enable)
+		sp_reg_set_bits(anx78xx, RX_P0, SP_HDMI_MUTE_CTRL_REG,
+				SP_AUD_MUTE);
+	else
+		sp_reg_clear_bits(anx78xx, RX_P0, SP_HDMI_MUTE_CTRL_REG,
+				  SP_AUD_MUTE);
+}
+
+static inline void sp_hdmi_mute_video(struct anx78xx *anx78xx, bool enable)
+{
+	if (enable)
+		sp_reg_set_bits(anx78xx, RX_P0, SP_HDMI_MUTE_CTRL_REG,
+				SP_VID_MUTE);
+	else
+		sp_reg_clear_bits(anx78xx, RX_P0, SP_HDMI_MUTE_CTRL_REG,
+				  SP_VID_MUTE);
+}
+
+static inline void sp_addronly_set(struct anx78xx *anx78xx, bool enable)
+{
+	if (enable)
+		sp_reg_set_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG,
+				SP_ADDR_ONLY);
+	else
+		sp_reg_clear_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG,
+				  SP_ADDR_ONLY);
+}
+
+static inline void sp_set_link_bandwidth(struct anx78xx *anx78xx, u8 bw)
+{
+	sp_reg_write(anx78xx, TX_P0, SP_DP_MAIN_LINK_BW_SET_REG, bw);
+}
+
+static inline u8 sp_get_link_bandwidth(struct anx78xx *anx78xx)
+{
+	u8 val;
+
+	sp_reg_read(anx78xx, TX_P0, SP_DP_MAIN_LINK_BW_SET_REG, &val);
+
+	return val & SP_LINK_BW_SET_MASK;
+}
+
+static inline bool sp_get_pll_lock_status(struct anx78xx *anx78xx)
+{
+	u8 val;
+
+	sp_reg_read(anx78xx, TX_P0, SP_DP_DEBUG1_REG, &val);
+
+	return (val & SP_DEBUG_PLL_LOCK) != 0;
+}
+
+static inline void sp_gen_m_clk_with_downspreading(struct anx78xx *anx78xx)
+{
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_M_CALCULATION_CTRL_REG,
+			SP_M_GEN_CLK_SEL);
+}
+
+static inline void sp_gen_m_clk_without_downspreading(struct anx78xx *anx78xx)
+{
+	sp_reg_clear_bits(anx78xx, TX_P0, SP_DP_M_CALCULATION_CTRL_REG,
+			  SP_M_GEN_CLK_SEL);
+}
+
+static inline void sp_hdmi_set_hpd(struct anx78xx *anx78xx, bool enable)
+{
+	if (enable)
+		sp_reg_set_bits(anx78xx, TX_P2, SP_VID_CTRL3_REG, SP_HPD_OUT);
+	else
+		sp_reg_clear_bits(anx78xx, TX_P2, SP_VID_CTRL3_REG,
+				  SP_HPD_OUT);
+}
+
+static inline void sp_hdmi_set_termination(struct anx78xx *anx78xx,
+					   bool enable)
+{
+	if (enable)
+		sp_reg_clear_bits(anx78xx, RX_P0, SP_TMDS_CTRL_BASE + 7,
+				  SP_PD_RT);
+	else
+		sp_reg_set_bits(anx78xx, RX_P0, SP_TMDS_CTRL_BASE + 7,
+				SP_PD_RT);
+}
+
+static inline bool sp_hdcp_repeater_mode(struct anx78xx *anx78xx)
+{
+	u8 val;
+
+	sp_reg_read(anx78xx, RX_P1, SP_HDCP_BCAPS_SHADOW_REG, &val);
+
+	return (val & SP_BCAPS_REPEATER);
+}
+
+static inline void sp_clean_hdcp_status(struct anx78xx *anx78xx)
+{
+	sp_reg_write(anx78xx, TX_P0, SP_HDCP_CTRL0_REG,
+		     SP_BKSV_SRM_PASS | SP_KSVLIST_VLD);
+	sp_reg_set_bits(anx78xx, TX_P0, SP_HDCP_CTRL0_REG, SP_RE_AUTH);
+	usleep_range(2000, 4000);
+}
+
+static const u8 dp_tx_output_precise_tune_bits[20] = {
+	0x01, 0x03, 0x07, 0x7f, 0x71, 0x6b, 0x7f,
+	0x73, 0x7f, 0x7f, 0x00, 0x00, 0x00, 0x00,
+	0x0c, 0x42, 0x1e, 0x3e, 0x72, 0x7e,
+};
+
+static void sp_link_phy_initialization(struct anx78xx *anx78xx)
+{
+	int i;
+
+	/*
+	 * REVISIT : It is writing to a RESERVED bits in Analog Control 0
+	 * register.
+	 */
+	sp_reg_write(anx78xx, TX_P2, SP_ANALOG_CTRL0_REG, 0x02);
+
+	/*
+	 * Write DP TX output emphasis precise tune bits.
+	 */
+	for (i = 0; i < ARRAY_SIZE(dp_tx_output_precise_tune_bits); i++)
+		sp_reg_write(anx78xx, TX_P1, SP_DP_TX_LT_CTRL0_REG + i,
+			     dp_tx_output_precise_tune_bits[i]);
+}
+
+static void sp_set_system_state(struct anx78xx *anx78xx,
+				enum sp_tx_state new_state)
+{
+	u8 val;
+
+	if ((sp.tx_system_state >= STATE_LINK_TRAINING) &&
+	    (new_state < STATE_LINK_TRAINING))
+		sp_reg_set_bits(anx78xx, TX_P0, SP_DP_ANALOG_POWER_DOWN_REG,
+				SP_CH0_PD);
+
+	if (sp.tx_system_state >= STATE_LINK_TRAINING) {
+		if (new_state >= STATE_AUDIO_OUTPUT) {
+			sp_hdmi_mute_audio(anx78xx, true);
+		} else {
+			sp_hdmi_mute_video(anx78xx, true);
+			sp_video_mute(anx78xx, true);
+		}
+	}
+
+	if (!sp_hdcp_repeater_mode(anx78xx)) {
+		if (sp.tx_system_state >= STATE_HDCP_AUTH &&
+		    new_state <= STATE_HDCP_AUTH) {
+			sp_reg_read(anx78xx, TX_P0, SP_HDCP_CTRL0_REG, &val);
+			if (val & ~(SP_KSVLIST_VLD | SP_BKSV_SRM_PASS))
+				sp_clean_hdcp_status(anx78xx);
+		}
+	} else {
+		if (sp.tx_system_state > STATE_LINK_TRAINING &&
+		    new_state <= STATE_LINK_TRAINING) {
+			/* Inform AP to re-auth */
+			sp_hdmi_set_hpd(anx78xx, false);
+			sp_hdmi_set_termination(anx78xx, false);
+			msleep(50);
+		}
+	}
+
+	sp.tx_system_state = new_state;
+	sp.hdcp_state = HDCP_CAPABLE_CHECK;
+	sp.tx_lt_state = LT_INIT;
+	sp.tx_vo_state = VO_WAIT_VIDEO_STABLE;
+	/* Reset audio stable counter */
+	sp.audio_stable_count = 0;
+	sp_print_system_state(anx78xx, sp.tx_system_state);
+}
+
+static inline void sp_reg_hardware_reset(struct anx78xx *anx78xx)
+{
+	sp_reg_set_bits(anx78xx, TX_P2, SP_RESET_CTRL1_REG, SP_HW_RST);
+	sp_variable_init(anx78xx);
+	sp_set_system_state(anx78xx, STATE_SP_INITIALIZED);
+	msleep(500);
+}
+
+static int sp_wait_aux_op_finish(struct anx78xx *anx78xx)
+{
+	u8 retry_cnt;
+	u8 val;
+	struct device *dev = &anx78xx->client->dev;
+
+	retry_cnt = 150;
+	while (--retry_cnt) {
+		sp_reg_read(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG, &val);
+		if (!(val & SP_AUX_EN))
+			break;
+		usleep_range(2000, 4000);
+	}
+
+	if (retry_cnt == 0) {
+		dev_err(dev, "aux operate failed!\n");
+		return -ETIMEDOUT;
+	}
+
+	sp_reg_read(anx78xx, TX_P0, SP_AUX_CH_STATUS_REG, &val);
+	if (val & SP_AUX_STATUS) {
+		dev_err(dev, "wait aux operation status %.2x\n", val);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static void sp_print_system_state(struct anx78xx *anx78xx,
+				  enum sp_tx_state state)
+{
+	static const char *const name[] = {
+		[STATE_CABLE_UNPLUGGED]		= "Cable is pulled out",
+		[STATE_WAITING_CABLE_PLUG]	= "Waiting cable plug",
+		[STATE_SP_INITIALIZED]		= "SlimPort initialized",
+		[STATE_SINK_CONNECTION]		= "Sink connection",
+		[STATE_PARSE_EDID]		= "Parse EDID",
+		[STATE_LINK_TRAINING]		= "Link training",
+		[STATE_VIDEO_OUTPUT]		= "Video output",
+		[STATE_HDCP_AUTH]		= "HDCP authentication",
+		[STATE_AUDIO_OUTPUT]		= "Audio output",
+		[STATE_PLAY_BACK]		= "Playback",
+	};
+
+	dev_dbg(&anx78xx->client->dev, "SlimPort state: %s\n",
+		(state < ARRAY_SIZE(name)) ? name[state] : "INVALID");
+}
+
+static void sp_reset_aux(struct anx78xx *anx78xx)
+{
+	sp_reg_set_bits(anx78xx, TX_P2, SP_RESET_CTRL2_REG, SP_AUX_RST);
+	sp_reg_clear_bits(anx78xx, TX_P2, SP_RESET_CTRL2_REG, SP_AUX_RST);
+}
+
+static void sp_write_dpcd_addr(struct anx78xx *anx78xx, unsigned int addr)
+{
+	sp_reg_write(anx78xx, TX_P0, SP_AUX_ADDR_7_0_REG, addr & 0xff);
+	sp_reg_write(anx78xx, TX_P0, SP_AUX_ADDR_15_8_REG,
+		     (addr & 0xff00) >> 8);
+
+	/*
+	 * DP AUX CH Address Register #2, only update bits[3:0]
+	 * [7:4] RESERVED
+	 * [3:0] AUX_ADDR[19:16], Register control AUX CH address.
+	 */
+	sp_reg_update_bits(anx78xx, TX_P0, SP_AUX_ADDR_19_16_REG,
+			   SP_AUX_ADDR_19_16_MASK, (addr & 0xf0000) >> 16);
+}
+
+static int sp_dp_read_bytes_from_dpcd(struct anx78xx *anx78xx,
+				      unsigned int addr, u8 count, u8 *buf)
+{
+	u8 val, val1, i;
+
+	if (count > AUX_CH_BUFFER_SIZE)
+		return -EINVAL;
+
+	/* Clear AUX CH data buffer */
+	sp_reg_write(anx78xx, TX_P0, SP_BUF_DATA_COUNT_REG, SP_BUF_CLR);
+	sp_reg_write(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL1_REG,
+		     ((count - 1) << SP_AUX_LENGTH_SHIFT) | 0x09);
+	sp_write_dpcd_addr(anx78xx, addr);
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG, SP_AUX_EN);
+	usleep_range(2000, 4000);
+
+	if (sp_wait_aux_op_finish(anx78xx)) {
+		sp_reg_read(anx78xx, TX_P2, SP_DP_INT_STATUS_REG, &val);
+		sp_reg_read(anx78xx, TX_P0, SP_DP_DEBUG1_REG, &val1);
+		if (!(val1 & SP_POLLING_EN) || (val & SP_POLLING_ERR))
+			sp_reset_aux(anx78xx);
+		return -ETIMEDOUT;
+	}
+
+	for (i = 0; i < count; i++) {
+		sp_reg_read(anx78xx, TX_P0, SP_DP_BUF_DATA0_REG + i, &val);
+		buf[i] = val;
+	}
+
+	return 0;
+}
+
+static int sp_dp_write_bytes_to_dpcd(struct anx78xx *anx78xx,
+				     unsigned int addr, u8 count, u8 *buf)
+{
+	int i;
+
+	if (count > AUX_CH_BUFFER_SIZE)
+		return -EINVAL;
+
+	sp_reg_write(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL1_REG,
+		     ((count - 1) << SP_AUX_LENGTH_SHIFT) | 0x08);
+	sp_write_dpcd_addr(anx78xx, addr);
+	for (i = 0; i < count; i++)
+		sp_reg_write(anx78xx, TX_P0, SP_DP_BUF_DATA0_REG + i, buf[i]);
+
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG, SP_AUX_EN);
+	return sp_wait_aux_op_finish(anx78xx);
+}
+
+static void sp_block_power_ctrl(struct anx78xx *anx78xx,
+				enum sp_tx_power_block sp_tx_pd_block,
+				bool power)
+{
+	if (power)
+		sp_reg_clear_bits(anx78xx, TX_P2, SP_POWERDOWN_CTRL_REG,
+				  sp_tx_pd_block);
+	else
+		sp_reg_set_bits(anx78xx, TX_P2, SP_POWERDOWN_CTRL_REG,
+				sp_tx_pd_block);
+
+	dev_dbg(&anx78xx->client->dev,
+		"sp_tx_power_on: %.2x\n", sp_tx_pd_block);
+}
+
+void sp_variable_init(struct anx78xx *anx78xx)
+{
+	sp.hdcp_enabled = false;
+
+	sp.tx_system_state = STATE_WAITING_CABLE_PLUG;
+	sp_print_system_state(anx78xx, sp.tx_system_state);
+
+	sp.read_edid_flag = false;
+
+	memset(sp.edid_blocks, 0, sizeof(*sp.edid_blocks));
+
+	sp.tx_lt_state = LT_INIT;
+	sp.hdcp_state = HDCP_CAPABLE_CHECK;
+	sp.repeater_state = HDCP_DONE;
+	sp.tx_vo_state = VO_WAIT_VIDEO_STABLE;
+	sp.tx_ao_state = AO_INIT;
+	sp.changed_bandwidth = DP_LINK_BW_5_4;
+
+	sp.hdcp_error_count = 0;
+	sp.hdcp_fail_count = 0;
+	sp.audio_stable_count = 0;
+
+	sp.tx_test_lt = false;
+	sp.tx_test_bw = 0;
+	sp.tx_test_edid = false;
+}
+
+static void sp_hdmi_tmds_phy_initialization(struct anx78xx *anx78xx)
+{
+	sp_reg_write(anx78xx, RX_P0, SP_TMDS_CTRL_BASE + 1, 0x90);
+	sp_reg_write(anx78xx, RX_P0, SP_TMDS_CTRL_BASE + 2, 0xa9);
+	sp_reg_write(anx78xx, RX_P0, SP_TMDS_CTRL_BASE + 6, 0x92);
+	sp_reg_write(anx78xx, RX_P0, SP_TMDS_CTRL_BASE + 7, 0x80);
+	sp_reg_write(anx78xx, RX_P0, SP_TMDS_CTRL_BASE + 20, 0xf2);
+}
+
+static void sp_hdmi_initialization(struct anx78xx *anx78xx)
+{
+	sp_reg_write(anx78xx, RX_P0, SP_HDMI_MUTE_CTRL_REG, SP_AUD_MUTE |
+		     SP_VID_MUTE);
+	sp_reg_set_bits(anx78xx, RX_P0, SP_CHIP_CTRL_REG, SP_MAN_HDMI5V_DET |
+			SP_PLLLOCK_CKDT_EN | SP_DIGITAL_CKDT_EN);
+
+	sp_reg_set_bits(anx78xx, RX_P0, SP_SOFTWARE_RESET1_REG,
+			SP_HDCP_MAN_RST | SP_SW_MAN_RST | SP_TMDS_RST |
+			SP_VIDEO_RST);
+	sp_reg_clear_bits(anx78xx, RX_P0, SP_SOFTWARE_RESET1_REG,
+			  SP_HDCP_MAN_RST | SP_SW_MAN_RST | SP_TMDS_RST |
+			  SP_VIDEO_RST);
+
+	/* Sync detect change, GP set mute */
+	sp_reg_set_bits(anx78xx, RX_P0, SP_AUD_EXCEPTION_ENABLE_BASE + 1,
+			BIT(5) | BIT(6));
+	sp_reg_set_bits(anx78xx, RX_P0, SP_AUD_EXCEPTION_ENABLE_BASE + 3,
+			SP_AEC_EN21);
+	sp_reg_set_bits(anx78xx, RX_P0, SP_AUDVID_CTRL_REG, SP_AVC_EN |
+			SP_AAC_OE | SP_AAC_EN);
+
+	sp_reg_clear_bits(anx78xx, RX_P0, SP_SYSTEM_POWER_DOWN1_REG,
+			  SP_PWDN_CTRL);
+
+	sp_reg_set_bits(anx78xx, RX_P0, SP_VID_DATA_RANGE_CTRL_REG,
+			SP_R2Y_INPUT_LIMIT);
+	sp_reg_write(anx78xx, RX_P0, SP_TMDS_CTRL_BASE + 22, 0xc4);
+	sp_reg_write(anx78xx, RX_P0, SP_TMDS_CTRL_BASE + 23, 0x18);
+
+	/* Enable DDC stretch */
+	sp_reg_write(anx78xx, TX_P0, SP_DP_EXTRA_I2C_DEV_ADDR_REG,
+		     SP_I2C_EXTRA_ADDR);
+
+	sp_hdmi_tmds_phy_initialization(anx78xx);
+	sp_hdmi_set_hpd(anx78xx, false);
+	sp_hdmi_set_termination(anx78xx, false);
+}
+
+static void sp_xtal_clk_sel(struct anx78xx *anx78xx)
+{
+	u8 val;
+
+	sp_reg_update_bits(anx78xx, TX_P2, SP_ANALOG_DEBUG2_REG,
+			   SP_XTAL_FRQ | SP_FORCE_SW_OFF_BYPASS,
+			   SP_XTAL_FRQ_27M);
+
+	sp_reg_write(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL3_REG,
+		     XTAL_CLK & SP_WAIT_COUNTER_7_0_MASK);
+	sp_reg_write(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL4_REG,
+		     ((XTAL_CLK & 0xff00) >> 2) | (XTAL_CLK / 10));
+
+	sp_reg_write(anx78xx, TX_P0, SP_I2C_GEN_10US_TIMER0_REG,
+		     XTAL_CLK & 0xff);
+	sp_reg_write(anx78xx, TX_P0, SP_I2C_GEN_10US_TIMER1_REG,
+		     (XTAL_CLK & 0xff00) >> 8);
+	sp_reg_write(anx78xx, TX_P0, SP_AUX_MISC_CTRL_REG,
+		     XTAL_CLK / 10 - 1);
+
+	sp_reg_read(anx78xx, RX_P0, SP_HDMI_US_TIMER_CTRL_REG, &val);
+	sp_reg_write(anx78xx, RX_P0, SP_HDMI_US_TIMER_CTRL_REG,
+		     (val & SP_MS_TIMER_MARGIN_10_8_MASK) |
+		     ((((XTAL_CLK / 10) >> 1) - 2) << 3));
+}
+
+void sp_tx_initialization(struct anx78xx *anx78xx)
+{
+	/* set terminal resistor to 50 ohm */
+	sp_reg_write(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG, 0x30);
+	/* enable aux double diff output */
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG, 0x08);
+
+	if (!sp_hdcp_repeater_mode(anx78xx)) {
+		sp_reg_clear_bits(anx78xx, TX_P0, SP_DP_HDCP_CTRL_REG,
+				  SP_AUTO_EN | SP_AUTO_START);
+		sp_reg_write(anx78xx, TX_P0, SP_OTP_KEY_PROTECT1_REG,
+			     SP_OTP_PSW1);
+		sp_reg_write(anx78xx, TX_P0, SP_OTP_KEY_PROTECT2_REG,
+			     SP_OTP_PSW2);
+		sp_reg_write(anx78xx, TX_P0, SP_OTP_KEY_PROTECT3_REG,
+			     SP_OTP_PSW3);
+		sp_reg_set_bits(anx78xx, TX_P0, SP_HDCP_KEY_COMMAND_REG,
+				SP_DISABLE_SYNC_HDCP);
+	}
+
+	sp_reg_write(anx78xx, TX_P2, SP_VID_CTRL8_REG, SP_VID_VRES_TH);
+
+	/*
+	 * DP HDCP auto authentication wait timer (when downstream starts to
+	 * auth, DP side will wait for this period then do auth automatically)
+	 */
+	sp_reg_write(anx78xx, TX_P0, SP_HDCP_AUTO_TIMER_REG, 0x00);
+
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_HDCP_CTRL_REG, SP_LINK_POLLING);
+
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_LINK_DEBUG_CTRL_REG,
+			SP_M_VID_DEBUG);
+	sp_reg_set_bits(anx78xx, TX_P2, SP_ANALOG_DEBUG2_REG,
+			SP_POWERON_TIME_1P5MS);
+
+	sp_xtal_clk_sel(anx78xx);
+	sp_reg_write(anx78xx, TX_P0, SP_AUX_DEFER_CTRL_REG,
+		     SP_DEFER_CTRL_EN | 0x0c);
+
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_POLLING_CTRL_REG,
+			SP_AUTO_POLLING_DISABLE);
+	/*
+	 * Short the link integrity check timer to speed up bstatus
+	 * polling for HDCP CTS item 1A-07
+	 */
+	sp_reg_write(anx78xx, TX_P0, SP_HDCP_LINK_CHECK_TIMER_REG, 0x1d);
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_MISC_CTRL_REG,
+			SP_EQ_TRAINING_LOOP);
+
+	/* power down the main link by default */
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_ANALOG_POWER_DOWN_REG,
+			SP_CH0_PD);
+
+	sp_reg_write(anx78xx, TX_P2, SP_INT_CTRL_REG, 0x01);
+
+	sp_link_phy_initialization(anx78xx);
+	sp_gen_m_clk_with_downspreading(anx78xx);
+
+	sp.down_sample_en = false;
+}
+
+/*
+ * Check if it is ANALOGIX dongle.
+ */
+static const u8 anx_oui[3] = {0x00, 0x22, 0xb9};
+
+static bool is_anx_dongle(struct anx78xx *anx78xx)
+{
+	u8 buf[3];
+
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_SINK_OUI, 3, buf);
+	if (!memcmp(buf, anx_oui, 3))
+		return true;
+
+	/* 0x0500~0x0502: BRANCH_IEEE_OUI */
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_BRANCH_OUI, 3, buf);
+	if (!memcmp(buf, anx_oui, 3))
+		return true;
+
+	return false;
+}
+
+static const u8 anx7750[4] = {0x37, 0x37, 0x35, 0x30};
+
+static u8 sp_dp_get_max_rx_bandwidth(struct anx78xx *anx78xx)
+{
+	u8 bandwidth, max_link_rate;
+	u8 buf[4];
+
+	bandwidth = 0;
+	/*
+	 * When ANX dongle is connected, if CHIP_ID=0x7750 the bandwidth is
+	 * 6.75G because ANX7750 DPCD 0x052x is not available.
+	 */
+	if (is_anx_dongle(anx78xx)) {
+		/*
+		 * 00503h - 005FFh: RESERVED for Branch Device vendor-specific
+		 * usage
+		 */
+		sp_dp_read_bytes_from_dpcd(anx78xx, 0x503, 4, buf);
+		if (!memcmp(buf, anx7750, sizeof(anx7750)))
+			bandwidth = DP_LINK_BW_6_75;
+		else
+			sp_dp_read_bytes_from_dpcd(anx78xx, 0x521,
+						   1, &bandwidth);
+	}
+
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_MAX_LINK_RATE, 1,
+				   &max_link_rate);
+	if (bandwidth < max_link_rate)
+		bandwidth = max_link_rate;
+
+	return bandwidth;
+}
+
+static bool sp_get_dp_connection(struct anx78xx *anx78xx)
+{
+	u8 val;
+
+	if (sp_dp_read_bytes_from_dpcd(anx78xx, DP_SINK_COUNT, 1, &val))
+		return false;
+
+	/* FIXME: Shouldn't be 0x3f SINK_COUNT[5:0] */
+	if (!(val & 0x1f))
+		return false;
+
+	if (sp_dp_read_bytes_from_dpcd(anx78xx, DP_NORP, 1, &val))
+		return false;
+
+	if (val & 0x20) {
+		sp_dp_read_bytes_from_dpcd(anx78xx, DP_SET_POWER, 1, &val);
+		/*
+		 * Bit 5 = SET_DN_DEVICE_DP_PWR_5V
+		 * Bit 6 = SET_DN_DEVICE_DP_PWR_12V
+		 * Bit 7 = SET_DN_DEVICE_DP_PWR_18V
+		 */
+		val &= 0x1f;
+		val |= 0x20;
+		sp_dp_write_bytes_to_dpcd(anx78xx, DP_SET_POWER, 1, &val);
+	}
+
+	return true;
+}
+
+static void sp_enable_video_input(struct anx78xx *anx78xx, bool enable)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 val;
+
+	sp_reg_read(anx78xx, TX_P2, SP_VID_CTRL1_REG, &val);
+	if (enable) {
+		sp_reg_set_bits(anx78xx, TX_P2, SP_VID_CTRL1_REG, SP_VIDEO_EN);
+		dev_dbg(dev, "Slimport video is enabled!\n");
+	} else {
+		sp_reg_clear_bits(anx78xx, TX_P2, SP_VID_CTRL1_REG,
+				  SP_VIDEO_EN);
+		dev_dbg(dev, "Slimport video is disabled!\n");
+	}
+}
+
+static u8 sp_get_edid_bandwidth(u8 *data)
+{
+	u16 pclk;
+
+	pclk = ((u16)data[1] << 8) | ((u16)data[0] & 0xff);
+	if (pclk <= 5300)
+		return DP_LINK_BW_1_62;
+	else if (pclk <= 8900)
+		return DP_LINK_BW_2_7;
+	else if (pclk <= 18000)
+		return DP_LINK_BW_5_4;
+	else
+		return DP_LINK_BW_6_75;
+}
+
+static u8 sp_parse_edid_to_get_bandwidth(struct anx78xx *anx78xx)
+{
+	int i;
+	u8 bandwidth, temp;
+
+	bandwidth = DP_LINK_BW_1_62;
+	for (i = 0; i < 4; i++) {
+		if (sp.edid_blocks[0x36 + 0x12 * i] == 0)
+			break;
+		temp = sp_get_edid_bandwidth(sp.edid_blocks + 0x36 + 0x12 * i);
+		dev_dbg(&anx78xx->client->dev, "bandwidth via EDID : %x\n",
+			temp);
+		if (bandwidth < temp)
+			bandwidth = temp;
+		if (bandwidth >= DP_LINK_BW_6_75)
+			break;
+	}
+
+	return bandwidth;
+}
+
+u8 sp_get_link_bandwidth_from_edid(struct anx78xx *anx78xx)
+{
+	u8 bandwidth, max_bandwidth;
+
+	bandwidth = sp_dp_get_max_rx_bandwidth(anx78xx);
+	max_bandwidth = sp_parse_edid_to_get_bandwidth(anx78xx);
+	if (bandwidth > max_bandwidth)
+		return max_bandwidth;
+
+	return bandwidth;
+}
+
+static int sp_tx_aux_wr(struct anx78xx *anx78xx, u8 offset)
+{
+	sp_reg_write(anx78xx, TX_P0, SP_DP_BUF_DATA0_REG, offset);
+	sp_reg_write(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL1_REG, 0x04);
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG, SP_AUX_EN);
+
+	return sp_wait_aux_op_finish(anx78xx);
+}
+
+static int sp_tx_aux_rd(struct anx78xx *anx78xx, u8 len)
+{
+	sp_reg_write(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL1_REG, len);
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG, SP_AUX_EN);
+
+	return sp_wait_aux_op_finish(anx78xx);
+}
+
+static int sp_edid_read(struct anx78xx *anx78xx, u8 offset,
+			u8 *buf)
+{
+	u8 data_cnt, errcnt;
+	u8 val, ret, i;
+
+	sp_tx_aux_wr(anx78xx, offset);
+	/* read 16 bytes (MOT = 1) */
+	sp_tx_aux_rd(anx78xx, 0xf0 | DP_AUX_I2C_MOT | DP_AUX_I2C_READ);
+	data_cnt = 0;
+	errcnt = 0;
+
+	while (data_cnt < 16) {
+		sp_reg_read(anx78xx, TX_P0, SP_BUF_DATA_COUNT_REG, &val);
+		val &= SP_BUF_DATA_COUNT_MASK;
+		if (val) {
+			for (i = 0; i < val; i++)
+				sp_reg_read(anx78xx, TX_P0,
+					    SP_DP_BUF_DATA0_REG + i,
+					    &buf[data_cnt + i]);
+			data_cnt += val;
+		} else {
+			if (errcnt++ <= 2)
+				sp_reset_aux(anx78xx);
+			else
+				return -ETIMEDOUT;
+		}
+		/* read 16 - data_cnt bytes (MOT = 1) */
+		val = DP_AUX_I2C_MOT | DP_AUX_I2C_READ |
+		      ((0x0f - data_cnt) << 4);
+		sp_tx_aux_rd(anx78xx, val);
+	}
+	sp_reg_write(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL1_REG, 0x01);
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG,
+			SP_ADDR_ONLY | SP_AUX_EN);
+	ret = sp_wait_aux_op_finish(anx78xx);
+	sp_addronly_set(anx78xx, false);
+
+	return ret;
+}
+
+static void sp_tx_edid_read_initial(struct anx78xx *anx78xx)
+{
+	/* Write AUX CH address 0x00050 */
+	sp_reg_write(anx78xx, TX_P0, SP_AUX_ADDR_7_0_REG, SP_I2C_EXTRA_ADDR);
+	sp_reg_write(anx78xx, TX_P0, SP_AUX_ADDR_15_8_REG, 0);
+	sp_reg_clear_bits(anx78xx, TX_P0, SP_AUX_ADDR_19_16_REG,
+			  SP_AUX_ADDR_19_16_MASK);
+}
+
+static int sp_seg_edid_read(struct anx78xx *anx78xx,
+			    u8 segment, u8 offset)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 val, retry_cnt;
+	int i;
+
+	sp_reg_write(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL1_REG, 0x04);
+	sp_reg_write(anx78xx, TX_P0, SP_AUX_ADDR_7_0_REG, 0x30);
+
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG,
+			SP_ADDR_ONLY | SP_AUX_EN);
+
+	if (sp_wait_aux_op_finish(anx78xx))
+		return -ETIMEDOUT;
+
+	sp_reg_write(anx78xx, TX_P0, SP_DP_BUF_DATA0_REG, segment);
+	sp_reg_write(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL1_REG, 0x04);
+
+	sp_reg_update_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG,
+			   SP_ADDR_ONLY | SP_AUX_EN, SP_AUX_EN);
+
+	retry_cnt = 10;
+	while (--retry_cnt) {
+		sp_reg_read(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG, &val);
+		if (!(val & SP_AUX_EN))
+			break;
+		usleep_range(1000, 2000);
+	}
+
+	if (retry_cnt == 0) {
+		dev_err(dev,
+			"failed to read DP AUX Channel Control Register 2\n");
+		sp_reset_aux(anx78xx);
+		return -ETIMEDOUT;
+	}
+
+	sp_reg_write(anx78xx, TX_P0, SP_AUX_ADDR_7_0_REG, SP_I2C_EXTRA_ADDR);
+	sp_tx_aux_wr(anx78xx, offset);
+	/* read 16 bytes (MOT = 1) */
+	sp_tx_aux_rd(anx78xx, 0xf0 | DP_AUX_I2C_MOT | DP_AUX_I2C_READ);
+
+	for (i = 0; i < 16; i++) {
+		retry_cnt = 10;
+		while (--retry_cnt) {
+			sp_reg_read(anx78xx, TX_P0, SP_BUF_DATA_COUNT_REG,
+				    &val);
+			if (val & SP_BUF_DATA_COUNT_MASK)
+				break;
+			usleep_range(2000, 4000);
+		}
+
+		if (retry_cnt == 0) {
+			dev_err(dev,
+				"failed to read DP Buffer Data Count Register\n");
+			sp_reset_aux(anx78xx);
+			return -ETIMEDOUT;
+		}
+
+		sp_reg_read(anx78xx, TX_P0, SP_DP_BUF_DATA0_REG + i, &val);
+	}
+
+	sp_reg_write(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL1_REG, 0x01);
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG,
+			SP_ADDR_ONLY | SP_AUX_EN);
+	sp_reg_clear_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG,
+			  SP_ADDR_ONLY);
+	sp_reg_read(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG, &val);
+
+	retry_cnt = 10;
+	while (--retry_cnt) {
+		sp_reg_read(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG, &val);
+		if (!(val & SP_AUX_EN))
+			break;
+		usleep_range(1000, 2000);
+	}
+
+	if (retry_cnt) {
+		dev_err(dev,
+			"failed to read DP AUX Channel Control Register 2\n");
+		sp_reset_aux(anx78xx);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int sp_edid_block_checksum(const u8 *raw_edid)
+{
+	int i;
+	u8 csum = 0;
+
+	for (i = 0; i < EDID_LENGTH; i++)
+		csum += raw_edid[i];
+
+	return csum;
+}
+
+static int sp_tx_edid_read(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 val, last_block, offset = 0;
+	u8 buf[16];
+	int i, j, count;
+
+	sp_tx_edid_read_initial(anx78xx);
+	sp_reg_write(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL1_REG, 0x04);
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG,
+			SP_AUX_EN | SP_ADDR_ONLY);
+
+	if (sp_wait_aux_op_finish(anx78xx))
+		return -ETIMEDOUT;
+
+	sp_addronly_set(anx78xx, false);
+
+	/* Read the number of blocks */
+	sp_tx_aux_wr(anx78xx, 0x7e);
+	sp_tx_aux_rd(anx78xx, DP_AUX_I2C_READ);
+	sp_reg_read(anx78xx, TX_P0, SP_DP_BUF_DATA0_REG, &last_block);
+	dev_dbg(dev, "last EDID block is %d\n", last_block);
+
+	/* FIXME: Why not just cap to 3 if the reported value is >3 */
+	if (last_block > 3)
+		last_block = 1;
+
+	/* for every block */
+	for (count = 0; count <= last_block; count++) {
+		switch (count) {
+		case 0:
+		case 1:
+			for (i = 0; i < 8; i++) {
+				offset = (i + count * 8) * 16;
+				if (sp_edid_read(anx78xx, offset, buf))
+					return -EINVAL;
+				for (j = 0; j < 16; j++)
+					sp.edid_blocks[offset + j] = buf[j];
+			}
+			break;
+		case 2:
+		case 3:
+			offset = (count == 2) ? 0x00 : 0x80;
+			for (j = 0; j < 8; j++) {
+				if (sp_seg_edid_read(anx78xx, count / 2,
+						     offset))
+					return -EINVAL;
+				offset = offset + 0x10;
+			}
+			break;
+		}
+	}
+
+	sp_reset_aux(anx78xx);
+
+	if (!drm_edid_block_valid(sp.edid_blocks, 0, true, NULL)) {
+		dev_err(dev, "EDID block is invalid\n");
+		return -EINVAL;
+	}
+
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_TEST_REQUEST, 1, &val);
+	if (val & DP_TEST_LINK_EDID_READ) {
+		dev_dbg(dev, "EDID test requested\n");
+		val = sp_edid_block_checksum(sp.edid_blocks);
+		dev_dbg(dev, "EDID checksum is %d\n", val);
+		sp_dp_write_bytes_to_dpcd(anx78xx, DP_TEST_EDID_CHECKSUM, 1,
+					  &val);
+		sp.tx_test_edid = true;
+		val = DP_TEST_EDID_CHECKSUM_WRITE;
+		sp_dp_write_bytes_to_dpcd(anx78xx, DP_TEST_RESPONSE, 1, &val);
+	}
+
+	return 0;
+}
+
+static bool sp_check_with_pre_edid(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 i;
+	u8 buf[16];
+	bool ret = false;
+
+	sp_tx_edid_read_initial(anx78xx);
+	sp_reg_write(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL1_REG, 0x04);
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_AUX_CH_CTRL2_REG, 0x03);
+
+	if (sp_wait_aux_op_finish(anx78xx))
+		goto return_point;
+
+	sp_addronly_set(anx78xx, false);
+
+	if (sp_edid_read(anx78xx, 0x70, buf))
+		goto return_point;
+
+	if (memcmp(&sp.edid_blocks[0x70], buf, 16) != 0) {
+		dev_dbg(dev, "different checksum and blocks num\n");
+		goto return_point;
+	}
+
+	if (sp_edid_read(anx78xx, 0x08, buf))
+		goto return_point;
+
+	for (i = 0; i < 16; i++) {
+		if (sp.edid_blocks[i + 8] != buf[i]) {
+			dev_dbg(dev, "different edid information\n");
+			goto return_point;
+		}
+	}
+
+	ret = true;
+return_point:
+	sp_reset_aux(anx78xx);
+
+	return ret;
+}
+
+static bool sp_edid_process(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 bw, edid_bw, val;
+	int i;
+
+	if (sp.read_edid_flag) {
+		if (!sp_check_with_pre_edid(anx78xx))
+			sp.read_edid_flag = false;
+	} else {
+		if (sp_tx_edid_read(anx78xx)) {
+			dev_err(dev, "EDID corruption!\n");
+			return false;
+		}
+	}
+
+	/* Release the HPD after the OTP loaddown */
+	for (i = 0; i < 10; i++) {
+		sp_reg_read(anx78xx, TX_P0, SP_HDCP_KEY_STATUS_REG, &val);
+		if (val & 0x01)
+			break;
+
+		dev_dbg(dev, "waiting HDCP KEY loaddown\n");
+		usleep_range(1000, 2000);
+	}
+
+	sp_reg_write(anx78xx, RX_P0, SP_INT_MASK_BASE + 1,
+		     SP_HDMI_DVI | SP_CKDT_CHG | SP_SCDT_CHG |
+		     SP_CABLE_PLUG_CHG);
+
+	if (!sp_hdcp_repeater_mode(anx78xx)) {
+		sp_hdmi_set_hpd(anx78xx, true);
+		sp_hdmi_set_termination(anx78xx, true);
+	}
+
+	bw = sp_dp_get_max_rx_bandwidth(anx78xx);
+	dev_dbg(dev, "RX BW %x\n", bw);
+
+	edid_bw = sp_parse_edid_to_get_bandwidth(anx78xx);
+	if (bw <= edid_bw)
+		edid_bw = bw;
+
+	dev_dbg(dev, "set link bw in edid %x\n", edid_bw);
+	sp.changed_bandwidth = edid_bw;
+
+	return true;
+}
+
+static void sp_lvttl_bit_mapping(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 val;
+	u8 vid_bit;
+
+	sp_reg_read(anx78xx, RX_P0, SP_VIDEO_STATUS_REG, &val);
+	switch ((val & SP_COLOR_DEPTH_MASK) >> SP_COLOR_DEPTH_SHIFT) {
+	default:
+	case SP_COLOR_DEPTH_MODE_LEGACY:
+		val = SP_IN_BPC_8BIT;
+		vid_bit = 0;
+		break;
+	case SP_COLOR_DEPTH_MODE_24BIT:
+		val = SP_IN_BPC_8BIT;
+		if (sp.frame.avi.colorspace == HDMI_COLORSPACE_YUV422)
+			vid_bit = 5;
+		else
+			vid_bit = 1;
+		break;
+	case SP_COLOR_DEPTH_MODE_30BIT:
+		val = SP_IN_BPC_10BIT;
+		if (sp.frame.avi.colorspace == HDMI_COLORSPACE_YUV422)
+			vid_bit = 6;
+		else
+			vid_bit = 2;
+		/*
+		 * For 10bit video must be set this value to 12bit by
+		 * someone
+		 */
+		if (sp.down_sample_en)
+			vid_bit = 3;
+		break;
+	case SP_COLOR_DEPTH_MODE_36BIT:
+		val = SP_IN_BPC_12BIT;
+		if (sp.frame.avi.colorspace == HDMI_COLORSPACE_YUV422)
+			vid_bit = 6;
+		else
+			vid_bit = 3;
+		break;
+	}
+
+	/*
+	 * For down sample video (12bit, 10bit ---> 8bit),
+	 * this register doesn't change
+	 */
+	if (!sp.down_sample_en)
+		sp_reg_update_bits(anx78xx, TX_P2, SP_VID_CTRL2_REG,
+				   SP_IN_BPC_MASK | SP_IN_COLOR_F_MASK,
+				   (val << SP_IN_BPC_SHIFT) |
+				   sp.frame.avi.colorspace);
+
+	sp_reg_write(anx78xx, TX_P2, SP_BIT_CTRL_SPECIFIC_REG,
+		     SP_ENABLE_BIT_CTRL | vid_bit << SP_BIT_CTRL_SELECT_SHIFT);
+
+	if (sp.tx_test_edid) {
+		/* Set color depth to 6 bpc (18 bpp) for link cts */
+		sp_reg_update_bits(anx78xx, TX_P2, SP_VID_CTRL2_REG,
+				   SP_IN_BPC_MASK, SP_IN_BPC_6BIT);
+		sp.tx_test_edid = false;
+		dev_dbg(dev, "color space is set to 6 bpc (18 bpp)\n");
+	}
+
+	if (sp.frame.avi.colorspace) {
+		/*
+		 * Set video values to default of channel 0, 1 and 2 for HDCP
+		 * embedded "blue screen" when HDCP authentication failed.
+		 */
+		sp_reg_write(anx78xx, TX_P0, SP_HDCP_VID0_BLUE_SCREEN_REG,
+			     0x80);
+		sp_reg_write(anx78xx, TX_P0, SP_HDCP_VID1_BLUE_SCREEN_REG,
+			     0x00);
+		sp_reg_write(anx78xx, TX_P0, SP_HDCP_VID2_BLUE_SCREEN_REG,
+			     0x80);
+	} else {
+		sp_reg_write(anx78xx, TX_P0, SP_HDCP_VID0_BLUE_SCREEN_REG,
+			     0x00);
+		sp_reg_write(anx78xx, TX_P0, SP_HDCP_VID0_BLUE_SCREEN_REG,
+			     0x00);
+		sp_reg_write(anx78xx, TX_P0, SP_HDCP_VID0_BLUE_SCREEN_REG,
+			     0x00);
+	}
+}
+
+static unsigned long sp_pclk_calc(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	unsigned long str_plck;
+	u16 vid_counter;
+	u8 val;
+
+	sp_reg_read(anx78xx, RX_P0, SP_PCLK_HIGHRES_CNT_BASE + 2, &val);
+	vid_counter = val << 8;
+	sp_reg_read(anx78xx, RX_P0, SP_PCLK_HIGHRES_CNT_BASE + 1, &val);
+	vid_counter |= val;
+	str_plck = (vid_counter * XTAL_CLK) >> 12;
+	dev_dbg(dev, "pixel clock is %ld.%ld\n", str_plck / 10, str_plck % 10);
+	return str_plck;
+}
+
+static int sp_tx_bw_lc_sel(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	unsigned long pixel_clk;
+	u8 link, val;
+
+	pixel_clk = sp_pclk_calc(anx78xx);
+
+	sp_reg_read(anx78xx, RX_P0, SP_VIDEO_STATUS_REG, &val);
+	switch ((val & SP_COLOR_DEPTH_MASK) >> SP_COLOR_DEPTH_SHIFT) {
+	case SP_COLOR_DEPTH_MODE_LEGACY:
+	case SP_COLOR_DEPTH_MODE_24BIT:
+	default:
+		break;
+	case SP_COLOR_DEPTH_MODE_30BIT:
+		pixel_clk = (pixel_clk * 5) >> 2;
+		break;
+	case SP_COLOR_DEPTH_MODE_36BIT:
+		pixel_clk = (pixel_clk * 3) >> 1;
+		break;
+	}
+
+	sp.down_sample_en = false;
+	if (pixel_clk <= 530) {
+		link = DP_LINK_BW_1_62;
+	} else if (pixel_clk <= 890) {
+		link = DP_LINK_BW_2_7;
+	} else if (pixel_clk <= 1800) {
+		link = DP_LINK_BW_5_4;
+	} else {
+		link = DP_LINK_BW_6_75;
+		if (pixel_clk > 2240)
+			sp.down_sample_en = true;
+	}
+
+	if (sp_get_link_bandwidth(anx78xx) != link) {
+		sp.changed_bandwidth = link;
+		dev_err(dev,
+			"different bandwidth between sink and video %.2x",
+			link);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void sp_downspreading_enable(struct anx78xx *anx78xx, bool enable)
+{
+	u8 val;
+
+	sp_reg_read(anx78xx, TX_P0, SP_DP_DOWNSPREADING_CTRL1_REG, &val);
+
+	if (enable) {
+		val |= SP_TX_SSC_DOWNSPREADING;
+		sp_reg_write(anx78xx, TX_P0, SP_DP_DOWNSPREADING_CTRL1_REG,
+			     val);
+
+		sp_dp_read_bytes_from_dpcd(anx78xx, DP_DOWNSPREAD_CTRL, 1,
+					   &val);
+		val |= DP_SPREAD_AMP_0_5;
+		sp_dp_write_bytes_to_dpcd(anx78xx, DP_DOWNSPREAD_CTRL, 1, &val);
+	} else {
+		val &= ~SP_TX_SSC_DISABLE;
+		sp_reg_write(anx78xx, TX_P0, SP_DP_DOWNSPREADING_CTRL1_REG,
+			     val);
+
+		sp_dp_read_bytes_from_dpcd(anx78xx, DP_DOWNSPREAD_CTRL, 1,
+					   &val);
+		val &= ~DP_SPREAD_AMP_0_5;
+		sp_dp_write_bytes_to_dpcd(anx78xx, DP_DOWNSPREAD_CTRL, 1, &val);
+	}
+}
+
+static void sp_config_ssc(struct anx78xx *anx78xx, enum sp_ssc_dep sscdep)
+{
+	sp_reg_write(anx78xx, TX_P0, SP_DP_DOWNSPREADING_CTRL1_REG, 0x0);
+	sp_reg_write(anx78xx, TX_P0, SP_DP_DOWNSPREADING_CTRL1_REG, sscdep);
+	sp_downspreading_enable(anx78xx, true);
+}
+
+void sp_dp_enable_enhanced_mode(struct anx78xx *anx78xx, bool enable)
+{
+	if (enable)
+		sp_reg_set_bits(anx78xx, TX_P0, SP_DP_SYSTEM_CTRL_BASE + 4,
+				SP_ENHANCED_MODE);
+	else
+		sp_reg_clear_bits(anx78xx, TX_P0, SP_DP_SYSTEM_CTRL_BASE + 4,
+				  SP_ENHANCED_MODE);
+}
+
+static void sp_dp_enable_rx_to_enhanced_mode(struct anx78xx *anx78xx,
+					     bool enable)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 val;
+
+	if (enable) {
+		sp_dp_read_bytes_from_dpcd(anx78xx, DP_LANE_COUNT_SET, 1, &val);
+		val |= DP_ENHANCED_FRAME_CAP;
+		sp_dp_write_bytes_to_dpcd(anx78xx, DP_LANE_COUNT_SET, 1, &val);
+		dev_dbg(dev, "rx to enhanced mode enabled\n");
+	} else {
+		sp_dp_read_bytes_from_dpcd(anx78xx, DP_LANE_COUNT_SET, 1, &val);
+		val &= ~DP_ENHANCED_FRAME_CAP;
+		sp_dp_write_bytes_to_dpcd(anx78xx, DP_LANE_COUNT_SET, 1, &val);
+		dev_dbg(dev, "rx to enhanced mode disabled\n");
+	}
+}
+
+static bool sp_dp_is_enhanced_mode_available(struct anx78xx *anx78xx)
+{
+	u8 val;
+
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_MAX_LANE_COUNT, 1, &val);
+
+	return val & DP_ENHANCED_FRAME_CAP;
+}
+
+static void sp_dp_set_enhanced_mode(struct anx78xx *anx78xx)
+{
+	u8 val;
+
+	val = sp_dp_is_enhanced_mode_available(anx78xx);
+	sp_dp_enable_rx_to_enhanced_mode(anx78xx, val);
+	sp_dp_enable_enhanced_mode(anx78xx, val);
+}
+
+static u16 sp_link_err_check(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u16 err;
+	u8 buf[2];
+
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_SYMBOL_ERROR_COUNT_LANE0, 2,
+				   buf);
+	usleep_range(5000, 10000);
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_SYMBOL_ERROR_COUNT_LANE0, 2,
+				   buf);
+
+	if (buf[1] & DP_ERROR_COUNT_VALID) {
+		err = ((buf[1] & DP_ERROR_COUNT_BITS_14_8_MASK) << 8) + buf[0];
+		dev_err(dev, "error of Lane %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static bool sp_lt_finish(struct anx78xx *anx78xx)
+{
+	u8 val;
+	struct device *dev = &anx78xx->client->dev;
+
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_LANE0_1_STATUS, 1, &val);
+
+	val &= DP_LANE_CR_DONE | DP_LANE_CHANNEL_EQ_DONE |
+	       DP_LANE_SYMBOL_LOCKED;
+	if (val != (DP_LANE_CR_DONE | DP_LANE_CHANNEL_EQ_DONE |
+	    DP_LANE_SYMBOL_LOCKED)) {
+		dev_dbg(dev, "Lane0 status error %.2x\n", val);
+		sp.tx_lt_state = LT_ERROR;
+		return false;
+	}
+
+	/*
+	 * If there is link error, adjust pre-emphasis to check error
+	 * again. If there is no error, keep the setting, otherwise
+	 * use 400mv0db
+	 */
+	if (sp.tx_test_lt) {
+		sp.tx_test_lt = false;
+		sp.tx_lt_state = LT_INIT;
+		return true;
+	}
+
+	if (sp_link_err_check(anx78xx)) {
+		sp_reg_read(anx78xx, TX_P0, SP_DP_LANE0_LT_CTRL_REG, &val);
+		if (!(val & SP_MAX_PRE_REACH)) {
+			/* Increase one pre-level */
+			sp_reg_write(anx78xx, TX_P0, SP_DP_LANE0_LT_CTRL_REG,
+				     val + 0x08);
+			/*
+			 * If error still exists, return to the link training
+			 * value
+			 */
+			if (sp_link_err_check(anx78xx))
+				sp_reg_write(anx78xx, TX_P0,
+					     SP_DP_LANE0_LT_CTRL_REG, val);
+		}
+	}
+
+	val = sp_get_link_bandwidth(anx78xx);
+	if (val != sp.changed_bandwidth) {
+		dev_dbg(dev, "bandwidth changed, cur:%.2x, per:%.2x\n", val,
+			sp.changed_bandwidth);
+		sp.tx_lt_state = LT_ERROR;
+		return false;
+	}
+
+	dev_dbg(dev, "LT succeed, bandwidth: %.2x", val);
+	sp_reg_read(anx78xx, TX_P0, SP_DP_LANE0_LT_CTRL_REG, &val);
+	dev_dbg(dev, "Lane0 set to %.2x\n", val);
+	sp.tx_lt_state = LT_INIT;
+
+	if (sp_hdcp_repeater_mode(anx78xx)) {
+		dev_dbg(dev, "HPD set to 1!\n");
+		sp_hdmi_set_hpd(anx78xx, true);
+		sp_hdmi_set_termination(anx78xx, true);
+	}
+
+	/*
+	 * Under low voltage (DVD10 = 0.97V), some chips cannot output video,
+	 * link down interrupt always happens.
+	 */
+	if (sp_link_err_check(anx78xx) > 200) {
+		dev_dbg(dev, "need to reset Serdes FIFO");
+		sp.tx_lt_state = LT_ERROR;
+	} else {
+		return true;
+	}
+
+	return false;
+}
+
+static bool sp_link_training(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 val, version;
+
+	switch (sp.tx_lt_state) {
+	case LT_INIT:
+		sp_block_power_ctrl(anx78xx, SP_TX_PWR_VIDEO, 1);
+		sp_video_mute(anx78xx, true);
+		sp_enable_video_input(anx78xx, false);
+		sp.tx_lt_state = LT_WAIT_PLL_LOCK;
+	/* fallthrough */
+	case LT_WAIT_PLL_LOCK:
+		if (!sp_get_pll_lock_status(anx78xx)) {
+			sp_reg_read(anx78xx, TX_P0, SP_DP_PLL_CTRL_REG,
+				    &val);
+
+			val |= SP_PLL_RST;
+			sp_reg_write(anx78xx, TX_P0, SP_DP_PLL_CTRL_REG,
+				     val);
+
+			val &= ~SP_PLL_RST;
+			sp_reg_write(anx78xx, TX_P0, SP_DP_PLL_CTRL_REG,
+				     val);
+
+			dev_dbg(dev, "PLL not lock!\n");
+			break;
+		} else {
+			sp.tx_lt_state = LT_CHECK_LINK_BW;
+		}
+	/* fallthrough */
+	case LT_CHECK_LINK_BW:
+		val = sp_dp_get_max_rx_bandwidth(anx78xx);
+		if (val < sp.changed_bandwidth) {
+			dev_dbg(dev, "over bandwidth!\n");
+			sp.changed_bandwidth = val;
+			break;
+		} else {
+			sp.tx_lt_state = LT_START;
+		}
+	/* fallthrough */
+	case LT_START:
+		if (sp.tx_test_lt) {
+			sp.changed_bandwidth = sp.tx_test_bw;
+			sp_reg_clear_bits(anx78xx, TX_P2, SP_VID_CTRL2_REG,
+					  0x70);
+		} else {
+			sp_reg_write(anx78xx, TX_P0, SP_DP_LANE0_LT_CTRL_REG,
+				     0x00);
+		}
+
+		sp_reg_clear_bits(anx78xx, TX_P0, SP_DP_ANALOG_POWER_DOWN_REG,
+				  SP_CH0_PD);
+
+		sp_config_ssc(anx78xx, SSC_DEP_4000PPM);
+		sp_set_link_bandwidth(anx78xx, sp.changed_bandwidth);
+		sp_dp_set_enhanced_mode(anx78xx);
+
+		sp_dp_read_bytes_from_dpcd(anx78xx, DP_DPCD_REV, 1, &version);
+		sp_dp_read_bytes_from_dpcd(anx78xx, DP_SET_POWER, 1, &val);
+		if (version >= 0x12)
+			val &= ~DP_SET_POWER_12_MASK;
+		else
+			val &= ~DP_SET_POWER_MASK;
+		val |= DP_SET_POWER_D0;
+		sp_dp_write_bytes_to_dpcd(anx78xx, DP_SET_POWER, 1, &val);
+
+		sp_reg_write(anx78xx, TX_P0, SP_DP_LT_CTRL_REG, SP_LT_EN);
+		sp.tx_lt_state = LT_WAITING_FINISH;
+	/* fallthrough */
+	case LT_WAITING_FINISH:
+		/* Waiting interrupt to change training state. */
+		break;
+	case LT_ERROR:
+		sp_reg_set_bits(anx78xx, TX_P2, SP_RESET_CTRL2_REG,
+				SP_SERDES_FIFO_RST);
+		msleep(20);
+		sp_reg_clear_bits(anx78xx, TX_P2, SP_RESET_CTRL2_REG,
+				  SP_SERDES_FIFO_RST);
+		dev_err(dev, "LT ERROR reset SERDES FIFO");
+		sp.tx_lt_state = LT_INIT;
+		break;
+	case LT_FINISH:
+		if (sp_lt_finish(anx78xx))
+			return true;
+		break;
+	default:
+		break;
+	}
+
+	return false;
+}
+
+static bool sp_match_vic_for_bt709(u8 vic)
+{
+	/* Video Identification Code (VIC) for BT709 */
+	return ((vic == 0x04) || (vic == 0x05) || (vic == 0x10) ||
+		(vic == 0x13) || (vic == 0x14) || (vic == 0x1f) ||
+		(vic == 0x20) || (vic == 0x21) || (vic == 0x22) ||
+		(vic == 0x27) || (vic == 0x28) || (vic == 0x29) ||
+		(vic == 0x2e) || (vic == 0x2f) || (vic == 0x3c) ||
+		(vic == 0x3d) || (vic == 0x3e) || (vic == 0x3f) ||
+		(vic == 0x40));
+}
+
+static void sp_set_colorspace(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 colorspace, val;
+
+	if (sp.down_sample_en) {
+		if (sp.frame.avi.colorspace == HDMI_COLORSPACE_YUV422) {
+			dev_dbg(dev, "YCbCr4:2:2 ---> PASS THROUGH.\n");
+			sp_reg_write(anx78xx, TX_P2, SP_VID_CTRL6_REG, 0x00);
+			sp_reg_write(anx78xx, TX_P2, SP_VID_CTRL5_REG, 0x00);
+		} else if (sp.frame.avi.colorspace == HDMI_COLORSPACE_YUV444) {
+			dev_dbg(dev, "YCbCr4:4:4 ---> YCbCr4:2:2\n");
+			sp_reg_write(anx78xx, TX_P2, SP_VID_CTRL6_REG,
+				     SP_VIDEO_PROCESS_EN | SP_UP_SAMPLE);
+			sp_reg_write(anx78xx, TX_P2, SP_VID_CTRL5_REG, 0x00);
+		} else if (sp.frame.avi.colorspace == HDMI_COLORSPACE_RGB) {
+			dev_dbg(dev, "RGB4:4:4 ---> YCbCr4:2:2\n");
+			sp_reg_write(anx78xx, TX_P2, SP_VID_CTRL6_REG,
+				     SP_VIDEO_PROCESS_EN | SP_UP_SAMPLE);
+			sp_reg_write(anx78xx, TX_P2, SP_VID_CTRL5_REG,
+				     SP_CSC_STD_SEL | SP_RANGE_R2Y |
+				     SP_CSPACE_R2Y);
+		}
+		sp_reg_write(anx78xx, TX_P2, SP_VID_CTRL2_REG,
+			     (SP_IN_BPC_8BIT << SP_IN_BPC_SHIFT) | colorspace);
+	} else {
+		sp_reg_read(anx78xx, TX_P2, SP_VID_CTRL2_REG, &colorspace);
+		colorspace &= SP_IN_COLOR_F_MASK;
+
+		/*
+		 * To change the CSC_STD_SEL bit we need to set
+		 * CSPACE_Y2R and CSPACE_ R2Y, otherwise has no
+		 * effect or is undetermined.
+		 */
+		if (colorspace == HDMI_COLORSPACE_RGB) {
+			sp_reg_clear_bits(anx78xx, TX_P2, SP_VID_CTRL5_REG,
+					  SP_RANGE_Y2R | SP_CSPACE_Y2R |
+					  SP_CSC_STD_SEL);
+			sp_reg_clear_bits(anx78xx, TX_P2, SP_VID_CTRL6_REG,
+					  SP_VIDEO_PROCESS_EN | SP_UP_SAMPLE);
+		} else {
+			/*
+			 * Colorimetric format of input video is YCbCr422
+			 * or YCbCr444
+			 */
+			sp_reg_set_bits(anx78xx, TX_P2, SP_VID_CTRL5_REG,
+					SP_RANGE_Y2R | SP_CSPACE_Y2R);
+
+			sp_reg_read(anx78xx, RX_P1,
+				    SP_AVI_INFOFRAME_DATA_BASE + 3,
+				    &val);
+
+			if (sp_match_vic_for_bt709(val))
+				sp_reg_set_bits(anx78xx, TX_P2,
+						SP_VID_CTRL5_REG,
+						SP_CSC_STD_SEL);
+			else	/* Convert based on BT601 */
+				sp_reg_clear_bits(anx78xx, TX_P2,
+						  SP_VID_CTRL5_REG,
+						  SP_CSC_STD_SEL);
+			/*
+			 * Enable 4:2:2 to 4:4:4 up sample when is required
+			 * and enable video process function.
+			 */
+			if (colorspace == HDMI_COLORSPACE_YUV422)
+				sp_reg_set_bits(anx78xx, TX_P2,
+						SP_VID_CTRL6_REG,
+						SP_VIDEO_PROCESS_EN |
+						SP_UP_SAMPLE);
+			else	/* YCBCR444 */
+				sp_reg_update_bits(anx78xx, TX_P2,
+						   SP_VID_CTRL6_REG,
+						   SP_VIDEO_PROCESS_EN |
+						   SP_UP_SAMPLE,
+						   SP_VIDEO_PROCESS_EN);
+		}
+	}
+}
+
+static u8 sp_hdmi_infoframe_checksum(u8 *ptr, int size)
+{
+	u8 csum = 0;
+	int i;
+
+	/* compute checksum */
+	for (i = 0; i < size; i++)
+		csum += ptr[i];
+
+	return 256 - csum;
+}
+
+static void sp_audio_infoframe_init(struct anx78xx *anx78xx)
+{
+	int i;
+	u8 buffer[HDMI_INFOFRAME_SIZE(AUDIO)];
+	u8 *ptr = buffer;
+	struct device *dev = &anx78xx->client->dev;
+
+	ptr[0] = HDMI_INFOFRAME_TYPE_AUDIO;
+	ptr[1] = 1;
+	ptr[2] = HDMI_AUDIO_INFOFRAME_SIZE;
+
+	/* start infoframe paylload */
+	ptr += HDMI_INFOFRAME_HEADER_SIZE;
+	for (i = 0; i < HDMI_AUDIO_INFOFRAME_SIZE; i++)
+		sp_reg_read(anx78xx, RX_P1, SP_AUD_INFOFRAME_DATA_BASE + i,
+			    &ptr[i]);
+
+	ptr[3] = 0;
+	ptr[3] = sp_hdmi_infoframe_checksum(buffer,
+					    HDMI_INFOFRAME_SIZE(AUDIO));
+
+	if (hdmi_infoframe_unpack(&sp.frame, buffer) < 0) {
+		dev_err(dev, "unpack of AUDIO infoframe failed\n");
+		return;
+	}
+}
+
+static void sp_avi_infoframe_init(struct anx78xx *anx78xx)
+{
+	int i;
+	u8 buffer[HDMI_INFOFRAME_SIZE(AVI)];
+	u8 *ptr = buffer;
+	struct device *dev = &anx78xx->client->dev;
+
+	ptr[0] = HDMI_INFOFRAME_TYPE_AVI;
+	ptr[1] = 2;
+	ptr[2] = HDMI_AVI_INFOFRAME_SIZE;
+
+	/* start infoframe payload */
+	ptr += HDMI_INFOFRAME_HEADER_SIZE;
+	for (i = 0; i < HDMI_AVI_INFOFRAME_SIZE; i++)
+		sp_reg_read(anx78xx, RX_P1, SP_AVI_INFOFRAME_DATA_BASE + i,
+			    &ptr[i]);
+
+	ptr[3] = 0;	/* checksum */
+	ptr[3] = sp_hdmi_infoframe_checksum(buffer, HDMI_INFOFRAME_SIZE(AVI));
+
+	if (hdmi_infoframe_unpack(&sp.frame, buffer) < 0) {
+		dev_err(dev, "unpack of AVI infoframe failed\n");
+		return;
+	}
+}
+
+static void sp_mpeg_infoframe_init(struct anx78xx *anx78xx)
+{
+	int i;
+	u8 buffer[HDMI_INFOFRAME_SIZE(MPEG)];
+	u8 *ptr = buffer;
+	struct device *dev = &anx78xx->client->dev;
+
+	ptr[0] = HDMI_INFOFRAME_TYPE_MPEG;
+	ptr[1] = 1;
+	ptr[2] = HDMI_MPEG_INFOFRAME_SIZE;
+
+	/* start infoframe payload */
+	ptr += HDMI_INFOFRAME_HEADER_SIZE;
+
+	for (i = 0; i < HDMI_MPEG_INFOFRAME_SIZE; i++)
+		sp_reg_read(anx78xx, RX_P1, SP_MPEG_VS_INFOFRAME_DATA_BASE + i,
+			    &ptr[i]);
+
+	ptr[3] = 0;	/* checksum */
+	ptr[3] = sp_hdmi_infoframe_checksum(buffer, HDMI_INFOFRAME_SIZE(MPEG));
+
+	if (hdmi_infoframe_unpack(&sp.frame, buffer) < 0) {
+		dev_err(dev, "unpack of MPEG infoframe failed\n");
+		return;
+	}
+}
+
+static void sp_vsi_infoframe_init(struct anx78xx *anx78xx)
+{
+	int i;
+	u8 len, buffer[10];
+	u8 *ptr = buffer;
+	struct device *dev = &anx78xx->client->dev;
+
+	ptr[0] = HDMI_INFOFRAME_TYPE_MPEG;
+	ptr[1] = 1;
+
+	/* get infoframe length */
+	sp_reg_read(anx78xx, RX_P1, SP_MPEG_VS_INFOFRAME_LEN_REG,
+		    &len);
+	if (len > 10)
+		return;
+
+	ptr[2] = len;
+
+	/* start infoframe payload */
+	ptr += HDMI_INFOFRAME_HEADER_SIZE;
+
+	for (i = 0; i < len; i++)
+		sp_reg_read(anx78xx, RX_P1, SP_MPEG_VS_INFOFRAME_DATA_BASE + i,
+			    &ptr[i]);
+
+	ptr[3] = 0;	/* checksum */
+	ptr[3] = sp_hdmi_infoframe_checksum(buffer,
+					    HDMI_INFOFRAME_HEADER_SIZE + len);
+
+	if (hdmi_infoframe_unpack(&sp.frame, buffer) < 0) {
+		dev_err(dev, "unpack of VSI infoframe failed\n");
+		return;
+	}
+}
+
+static void sp_load_packet(struct anx78xx *anx78xx,
+			   enum hdmi_infoframe_type type)
+{
+	int i;
+	u8 buffer[32];
+	u8 *ptr = buffer;
+
+	memset(buffer, 0, sizeof(*buffer));
+	ptr += HDMI_INFOFRAME_HEADER_SIZE;
+
+	switch (type) {
+	case HDMI_INFOFRAME_TYPE_AUDIO:
+		sp_reg_write(anx78xx, TX_P2, SP_INFOFRAME_AUD_TYPE_REG,
+			     sp.frame.audio.type);
+		sp_reg_write(anx78xx, TX_P2, SP_INFOFRAME_AUD_VER_REG,
+			     sp.frame.audio.version);
+		sp_reg_write(anx78xx, TX_P2, SP_INFOFRAME_AUD_LEN_REG,
+			     sp.frame.audio.length);
+		/* packs the audio information into a binary buffer */
+		hdmi_audio_infoframe_pack(&sp.frame.audio, buffer,
+					  HDMI_INFOFRAME_SIZE(AUDIO));
+		/* start infoframe payload */
+		for (i = 0; i < sp.frame.audio.length; i++)
+			sp_reg_write(anx78xx, TX_P2,
+				     SP_INFOFRAME_AUD_DB0_REG + i, ptr[i]);
+		break;
+	case HDMI_INFOFRAME_TYPE_AVI:
+		sp_reg_write(anx78xx, TX_P2, SP_INFOFRAME_AVI_TYPE_REG,
+			     sp.frame.avi.type);
+		sp_reg_write(anx78xx, TX_P2, SP_INFOFRAME_AVI_VER_REG,
+			     sp.frame.avi.version);
+		sp_reg_write(anx78xx, TX_P2, SP_INFOFRAME_AVI_LEN_REG,
+			     sp.frame.avi.length);
+		/* packs the AVI information into a binary buffer */
+		hdmi_avi_infoframe_pack(&sp.frame.avi, buffer,
+					HDMI_INFOFRAME_SIZE(AVI));
+		/* start infoframe payload */
+		for (i = 0; i < sp.frame.avi.length; i++)
+			sp_reg_write(anx78xx, TX_P2,
+				     SP_INFOFRAME_AVI_DB0_REG + i, ptr[i]);
+		break;
+	case HDMI_INFOFRAME_TYPE_MPEG:
+		sp_reg_write(anx78xx, TX_P2, SP_INFOFRAME_MPEG_TYPE_REG,
+			     sp.frame.mpeg.type);
+		sp_reg_write(anx78xx, TX_P2, SP_INFOFRAME_MPEG_VER_REG,
+			     sp.frame.mpeg.version);
+		sp_reg_write(anx78xx, TX_P2, SP_INFOFRAME_MPEG_LEN_REG,
+			     sp.frame.mpeg.length);
+		/* packs the MPEG information into a binary buffer */
+		hdmi_mpeg_infoframe_pack(&sp.frame.mpeg, buffer,
+					 HDMI_INFOFRAME_SIZE(MPEG));
+		/* start infoframe payload */
+		for (i = 0; i < sp.frame.mpeg.length; i++)
+			sp_reg_write(anx78xx, TX_P2,
+				     SP_INFOFRAME_MPEG_DB0_REG + i, ptr[i]);
+		break;
+	case HDMI_INFOFRAME_TYPE_VENDOR:
+		sp_reg_write(anx78xx, TX_P2, SP_INFOFRAME_MPEG_TYPE_REG,
+			     sp.frame.vendor.hdmi.type);
+		sp_reg_write(anx78xx, TX_P2, SP_INFOFRAME_MPEG_VER_REG,
+			     sp.frame.vendor.hdmi.version);
+		sp_reg_write(anx78xx, TX_P2, SP_INFOFRAME_MPEG_LEN_REG,
+			     sp.frame.vendor.hdmi.length);
+		/* pack the VSI information into a binary buffer */
+		hdmi_vendor_infoframe_pack(&sp.frame.vendor.hdmi, buffer,
+					   HDMI_INFOFRAME_HEADER_SIZE +
+					   sp.frame.vendor.hdmi.length);
+		for (i = 0; i < sp.frame.vendor.hdmi.length; i++)
+			sp_reg_write(anx78xx, TX_P2,
+				     SP_INFOFRAME_MPEG_DB0_REG + i, ptr[i]);
+		break;
+	default:
+		break;
+	}
+}
+
+static void sp_config_packets(struct anx78xx *anx78xx,
+			      enum hdmi_infoframe_type type)
+{
+	switch (type) {
+	case HDMI_INFOFRAME_TYPE_AUDIO:
+		sp_reg_clear_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+				  SP_AUD_IF_EN);
+		sp_load_packet(anx78xx, HDMI_INFOFRAME_TYPE_AUDIO);
+		sp_reg_set_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+				SP_AUD_IF_UP);
+		sp_reg_set_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+				SP_AUD_IF_EN);
+		break;
+	case HDMI_INFOFRAME_TYPE_AVI:
+		sp_reg_clear_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+				  SP_AVI_IF_EN);
+		sp_load_packet(anx78xx, HDMI_INFOFRAME_TYPE_AVI);
+		sp_reg_set_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+				SP_AVI_IF_UD);
+		sp_reg_set_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+				SP_AVI_IF_EN);
+		break;
+	case HDMI_INFOFRAME_TYPE_MPEG:
+		sp_reg_clear_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+				  SP_MPEG_IF_EN);
+		sp_load_packet(anx78xx, HDMI_INFOFRAME_TYPE_MPEG);
+		sp_reg_set_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+				SP_MPEG_IF_UD);
+		sp_reg_set_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+				SP_MPEG_IF_EN);
+		break;
+	case HDMI_INFOFRAME_TYPE_VENDOR:
+		sp_reg_clear_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+				  SP_MPEG_IF_EN);
+		sp_load_packet(anx78xx, HDMI_INFOFRAME_TYPE_VENDOR);
+		sp_reg_set_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+				SP_MPEG_IF_UD);
+		sp_reg_set_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+				SP_MPEG_IF_EN);
+		break;
+	default:
+		break;
+	}
+}
+
+static bool sp_config_video_output(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 val;
+
+	switch (sp.tx_vo_state) {
+	default:
+	case VO_WAIT_VIDEO_STABLE:
+		sp_reg_read(anx78xx, RX_P0, SP_SYSTEM_STATUS_REG, &val);
+		if ((val & SP_TMDS_DE_DET) && (val & SP_TMDS_CLOCK_DET)) {
+			if (sp_tx_bw_lc_sel(anx78xx))
+				return false;
+			sp_enable_video_input(anx78xx, false);
+			sp_hdmi_new_avi_int(anx78xx);
+			sp_reg_read(anx78xx, RX_P0,
+				    SP_PACKET_RECEIVING_STATUS_REG, &val);
+			if (val & SP_VSI_RCVD)
+				sp_hdmi_new_vsi_int(anx78xx);
+			sp_enable_video_input(anx78xx, true);
+			sp.tx_vo_state = VO_WAIT_TX_VIDEO_STABLE;
+		} else {
+			dev_dbg(dev, "HDMI input video not stable!\n");
+			break;
+		}
+	/* fallthrough */
+	case VO_WAIT_TX_VIDEO_STABLE:
+		/*
+		 * The flag is write clear and can be latched from last
+		 * status. So the first read and write is to clear the
+		 * previous status.
+		 */
+		sp_reg_read(anx78xx, TX_P0, SP_DP_SYSTEM_CTRL_BASE + 2, &val);
+		sp_reg_write(anx78xx, TX_P0, SP_DP_SYSTEM_CTRL_BASE + 2, val);
+
+		sp_reg_read(anx78xx, TX_P0, SP_DP_SYSTEM_CTRL_BASE + 2, &val);
+		if (val & SP_CHA_STA) {
+			dev_dbg(dev, "stream clock not stable!\n");
+			break;
+		}
+
+		/*
+		 * The flag is write clear and can be latched from
+		 * last status. So the first read and write is to
+		 * clear the previous status.
+		 */
+		sp_reg_read(anx78xx, TX_P0, SP_DP_SYSTEM_CTRL_BASE + 3, &val);
+		sp_reg_write(anx78xx, TX_P0, SP_DP_SYSTEM_CTRL_BASE + 3,
+			     val);
+
+		sp_reg_read(anx78xx, TX_P0, SP_DP_SYSTEM_CTRL_BASE + 3, &val);
+		if (val & SP_STRM_VALID) {
+			if (sp.tx_test_lt)
+				sp.tx_test_lt = false;
+			sp.tx_vo_state = VO_FINISH;
+		} else {
+			dev_err(dev, "video stream not valid!\n");
+			break;
+		}
+	/* fallthrough */
+	case VO_FINISH:
+		sp_block_power_ctrl(anx78xx, SP_TX_PWR_AUDIO, false);
+		sp_hdmi_mute_video(anx78xx, false);
+		sp_video_mute(anx78xx, false);
+		sp_show_information(anx78xx);
+		return true;
+	}
+
+	return false;
+}
+
+static inline void sp_hdcp_encryption_disable(struct anx78xx *anx78xx)
+{
+	sp_reg_clear_bits(anx78xx, TX_P0, SP_HDCP_CTRL0_REG, SP_HDCP_ENC_EN);
+}
+
+static inline void sp_hdcp_encryption_enable(struct anx78xx *anx78xx)
+{
+	sp_reg_set_bits(anx78xx, TX_P0, SP_HDCP_CTRL0_REG, SP_HDCP_ENC_EN);
+}
+
+static void sp_hw_hdcp_enable(struct anx78xx *anx78xx)
+{
+	sp_reg_clear_bits(anx78xx, TX_P0, SP_HDCP_CTRL0_REG,
+			  SP_HDCP_ENC_EN | SP_HARD_AUTH_EN);
+	sp_reg_set_bits(anx78xx, TX_P0, SP_HDCP_CTRL0_REG,
+			SP_HARD_AUTH_EN | SP_BKSV_SRM_PASS |
+			SP_KSVLIST_VLD | SP_HDCP_ENC_EN);
+
+	/*
+	 * Set the wait timing value for R0 checking of HDCP first step
+	 * authentication after write AKSV to receiver. Default value is
+	 * 0x64 (100ms).
+	 */
+	sp_reg_write(anx78xx, TX_P0, SP_HDCP_WAIT_R0_TIME_REG, 0xb0);
+
+	/*
+	 * Set the wait timing value for repeater KSVFIFO ready in HDCP first
+	 * step authentication. Default value is 0x9c (4.2s)
+	 */
+	sp_reg_write(anx78xx, TX_P0, SP_HDCP_RPTR_RDY_WAIT_TIME_REG, 0xc8);
+}
+
+static bool sp_hdcp_process(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+
+	switch (sp.hdcp_state) {
+	case HDCP_CAPABLE_CHECK:
+		sp.hdcp_fail_count = 0;
+		if (is_anx_dongle(anx78xx))
+			sp.hdcp_state = HDCP_WAITING_VID_STB;
+		else
+			sp.hdcp_state = HDCP_HW_ENABLE;
+		if (!sp.hdcp_enabled)
+			sp.hdcp_state = HDCP_NOT_SUPPORTED;
+		if (sp.hdcp_state != HDCP_WAITING_VID_STB)
+			break;
+	/* fallthrough */
+	case HDCP_WAITING_VID_STB:
+		msleep(100);
+		sp.hdcp_state = HDCP_HW_ENABLE;
+	/* fallthrough */
+	case HDCP_HW_ENABLE:
+		sp_video_mute(anx78xx, true);
+		sp_clean_hdcp_status(anx78xx);
+		sp_block_power_ctrl(anx78xx, SP_TX_PWR_HDCP, false);
+		msleep(20);
+		sp_block_power_ctrl(anx78xx, SP_TX_PWR_HDCP, true);
+		sp_reg_write(anx78xx, TX_P2, SP_COMMON_INT_MASK_BASE + 2,
+			     0x01);
+		msleep(50);
+		sp_hw_hdcp_enable(anx78xx);
+		sp.hdcp_state = HDCP_WAITING_FINISH;
+	/* fallthrough */
+	case HDCP_WAITING_FINISH:
+		break;
+	case HDCP_FINISH:
+		sp_hdcp_encryption_enable(anx78xx);
+		sp_hdmi_mute_video(anx78xx, false);
+		sp_video_mute(anx78xx, false);
+		sp.hdcp_state = HDCP_CAPABLE_CHECK;
+		dev_dbg(dev, "HDCP authentication pass\n");
+		return true;
+	case HDCP_FAILED:
+		if (sp.hdcp_fail_count > 5) {
+			sp_reg_hardware_reset(anx78xx);
+			sp.hdcp_state = HDCP_CAPABLE_CHECK;
+			sp.hdcp_fail_count = 0;
+			dev_dbg(dev, "HDCP authentication failed\n");
+		} else {
+			sp.hdcp_fail_count++;
+			sp.hdcp_state = HDCP_WAITING_VID_STB;
+		}
+		break;
+	default:
+	case HDCP_NOT_SUPPORTED:
+		dev_dbg(dev, "sink is not capable HDCP\n");
+		sp_block_power_ctrl(anx78xx, SP_TX_PWR_HDCP, false);
+		sp_video_mute(anx78xx, false);
+		sp.hdcp_state = HDCP_CAPABLE_CHECK;
+		return true;
+	}
+
+	return false;
+}
+
+static void sp_enable_audio_output(struct anx78xx *anx78xx, bool enable)
+{
+	u8 val;
+
+	sp_reg_clear_bits(anx78xx, TX_P0, SP_DP_AUDIO_CTRL_REG, SP_AUD_EN);
+	if (enable) {
+		sp_audio_infoframe_init(anx78xx);
+		sp_config_packets(anx78xx, HDMI_INFOFRAME_TYPE_AUDIO);
+
+		sp_reg_read(anx78xx, RX_P0, SP_HDMI_STATUS_REG, &val);
+		if (val & SP_HDMI_AUD_LAYOUT) {
+			sp_reg_read(anx78xx, RX_P1, SP_AUD_INFOFRAME_DATA_BASE,
+				    &val);
+			sp_reg_write(anx78xx, TX_P2, SP_AUD_CH_STATUS_BASE + 5,
+				     (val & 0x07) << 5 | SP_AUDIO_LAYOUT);
+		} else {
+			sp_reg_write(anx78xx, TX_P2, SP_AUD_CH_STATUS_BASE + 5,
+				     SP_I2S_CH_NUM_2 & ~SP_AUDIO_LAYOUT);
+		}
+		sp_reg_set_bits(anx78xx, TX_P0, SP_DP_AUDIO_CTRL_REG,
+				SP_AUD_EN);
+	} else {
+		sp_reg_clear_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+				  SP_AUD_IF_EN);
+	}
+}
+
+static int sp_calculate_audio_m_value(struct anx78xx *anx78xx)
+{
+	u8 val;
+	struct device *dev = &anx78xx->client->dev;
+	unsigned long m_aud, ls_clk = 0;
+	unsigned long aud_freq = 0;
+
+	sp_reg_read(anx78xx, RX_P0, SP_AUD_SPDIF_CH_STATUS_BASE + 4, &val);
+
+	switch (val & SP_FS_FREQ_MASK) {
+	case SP_FS_FREQ_44100HZ:
+		aud_freq = 44100;
+		break;
+	case SP_FS_FREQ_48000HZ:
+		aud_freq = 48000;
+		break;
+	case SP_FS_FREQ_32000HZ:
+		aud_freq = 32000;
+		break;
+	case SP_FS_FREQ_88200HZ:
+		aud_freq = 88200;
+		break;
+	case SP_FS_FREQ_96000HZ:
+		aud_freq = 96000;
+		break;
+	case SP_FS_FREQ_176400HZ:
+		aud_freq = 176400;
+		break;
+	case SP_FS_FREQ_192000HZ:
+		aud_freq = 192000;
+		break;
+	default:
+		dev_err(dev, "invalid sampling clock frequency %d\n",
+			val & SP_FS_FREQ_MASK);
+		return -EINVAL;
+	}
+
+	switch (sp_get_link_bandwidth(anx78xx)) {
+	case DP_LINK_BW_1_62:
+		ls_clk = 162000;
+		break;
+	case DP_LINK_BW_2_7:
+		ls_clk = 270000;
+		break;
+	case DP_LINK_BW_5_4:
+		ls_clk = 540000;
+		break;
+	case DP_LINK_BW_6_75:
+		ls_clk = 675000;
+		break;
+	default:
+		dev_err(dev, "invalid main link bandwidth setting\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "aud_freq = %ld , LS_CLK = %ld\n", aud_freq, ls_clk);
+
+	m_aud = (((512 * aud_freq) / ls_clk) * 32768) / 1000;
+	sp_reg_write(anx78xx, TX_P1, SP_AUD_INTERFACE_CTRL4_REG, m_aud & 0xff);
+	m_aud = m_aud >> 8;
+	sp_reg_write(anx78xx, TX_P1, SP_AUD_INTERFACE_CTRL5_REG, m_aud & 0xff);
+	sp_reg_write(anx78xx, TX_P1, SP_AUD_INTERFACE_CTRL6_REG, 0x00);
+
+	return 0;
+}
+
+static void sp_config_audio(struct anx78xx *anx78xx)
+{
+	u8 val;
+
+	sp_block_power_ctrl(anx78xx, SP_TX_PWR_AUDIO, true);
+
+	sp_reg_read(anx78xx, TX_P0, SP_DP_MAIN_LINK_BW_SET_REG, &val);
+	if ((val & SP_INITIAL_SLIM_M_AUD_SEL) &&
+	    sp_calculate_audio_m_value(anx78xx))
+			return;
+
+	sp_reg_clear_bits(anx78xx, TX_P1, SP_AUD_INTERFACE_CTRL0_REG,
+			  SP_AUD_INTERFACE_DISABLE);
+
+	sp_reg_set_bits(anx78xx, TX_P1, SP_AUD_INTERFACE_CTRL2_REG,
+			SP_M_AUD_ADJUST_ST);
+
+	sp_reg_read(anx78xx, RX_P0, SP_HDMI_STATUS_REG, &val);
+	if (val & SP_HDMI_AUD_LAYOUT)
+		sp_reg_set_bits(anx78xx, TX_P2, SP_AUD_CH_STATUS_BASE + 5,
+				SP_I2S_CH_NUM_8 | SP_AUDIO_LAYOUT);
+	else
+		sp_reg_clear_bits(anx78xx, TX_P2, SP_AUD_CH_STATUS_BASE + 5,
+				  SP_I2S_CHANNEL_NUM_MASK | SP_AUDIO_LAYOUT);
+
+	sp_hdmi_audio_samplechg_int(anx78xx);
+
+	/* enable audio */
+	sp_enable_audio_output(anx78xx, true);
+}
+
+static bool sp_config_audio_output(struct anx78xx *anx78xx)
+{
+	u8 val;
+
+	switch (sp.tx_ao_state) {
+	default:
+	case AO_INIT:
+	case AO_CTS_RCV_INT:
+	case AO_AUDIO_RCV_INT:
+		sp_reg_read(anx78xx, RX_P0, SP_HDMI_STATUS_REG, &val);
+		if (!(val & SP_HDMI_MODE)) {
+			sp.tx_ao_state = AO_INIT;
+			return true;
+		}
+		break;
+	case AO_RCV_INT_FINISH:
+		if (sp.audio_stable_count++ > 2) {
+			sp.tx_ao_state = AO_OUTPUT;
+		} else {
+			sp.tx_ao_state = AO_INIT;
+			break;
+		}
+	/* fallthrough */
+	case AO_OUTPUT:
+		sp.audio_stable_count = 0;
+		sp.tx_ao_state = AO_INIT;
+		sp_video_mute(anx78xx, false);
+		sp_hdmi_mute_audio(anx78xx, false);
+		sp_config_audio(anx78xx);
+		return true;
+	}
+
+	return false;
+}
+
+static void sp_initialization(struct anx78xx *anx78xx)
+{
+	sp.read_edid_flag = false;
+
+	/* Power on all modules */
+	sp_reg_write(anx78xx, TX_P2, SP_POWERDOWN_CTRL_REG, 0x00);
+	/* Driver Version */
+	sp_reg_write(anx78xx, TX_P1, SP_FW_VER_REG, FW_VERSION);
+	sp_hdmi_initialization(anx78xx);
+	sp_tx_initialization(anx78xx);
+	msleep(200);
+}
+
+/*
+ * Interrupt receiver function, gets the service interrupts and updates the
+ * status of the interrupts so that correct interrupt service routines can
+ * be called in the SlimPort task handler function.
+ */
+static void sp_int_receiver(struct anx78xx *anx78xx)
+{
+	int i;
+
+	/* Common Interrupt Status Registers */
+	for (i = 0; i < ARRAY_SIZE(sp.common_int); i++) {
+		sp_reg_read(anx78xx, TX_P2, SP_COMMON_INT_STATUS_BASE + 1 + i,
+			    &sp.common_int[i]);
+		sp_reg_write(anx78xx, TX_P2, SP_COMMON_INT_STATUS_BASE + 1 + i,
+			     sp.common_int[i]);
+	}
+
+	/* Display Port Interrupt Status Register */
+	sp_reg_read(anx78xx, TX_P2, SP_DP_INT_STATUS_REG, &sp.dp_int);
+	sp_reg_write(anx78xx, TX_P2, SP_DP_INT_STATUS_REG, sp.dp_int);
+
+	/* Interrupt Status Registers */
+	for (i = 0; i < ARRAY_SIZE(sp.sp_hdmi_int); i++) {
+		sp_reg_read(anx78xx, RX_P0, SP_INT_STATUS1_REG + i,
+			    &sp.sp_hdmi_int[i]);
+		sp_reg_write(anx78xx, RX_P0, SP_INT_STATUS1_REG + i,
+			     sp.sp_hdmi_int[i]);
+	}
+}
+
+static void sp_pll_changed_int_handler(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+
+	if (sp.tx_system_state >= STATE_LINK_TRAINING) {
+		if (!sp_get_pll_lock_status(anx78xx)) {
+			dev_dbg(dev, "PLL not lock!\n");
+			sp_set_system_state(anx78xx, STATE_LINK_TRAINING);
+		}
+	}
+}
+
+static u8 sp_dp_autotest_link_training(struct anx78xx *anx78xx)
+{
+	u8 bandwidth, response;
+
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_TEST_LINK_RATE, 1,
+				   &bandwidth);
+	switch (bandwidth) {
+	case DP_LINK_BW_1_62:
+	case DP_LINK_BW_2_7:
+	case DP_LINK_BW_5_4:
+	case DP_LINK_BW_6_75:
+		sp_set_link_bandwidth(anx78xx, bandwidth);
+		sp.tx_test_bw = bandwidth;
+		break;
+	default:
+		sp_set_link_bandwidth(anx78xx, DP_LINK_BW_6_75);
+		sp.tx_test_bw = DP_LINK_BW_6_75;
+		break;
+	}
+
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_TEST_RESPONSE, 1, &response);
+	response |= DP_TEST_ACK;
+
+	return response;
+}
+
+static u8 sp_autotest_phy_pattern(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 b_sw, response;
+	u8 buf[16];
+	int i;
+
+	sp_dp_autotest_link_training(anx78xx);
+
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_PHY_TEST_PATTERN, 1, buf);
+	dev_dbg(dev, "DPCD: PHY test pattern = %.2x\n", buf[0]);
+	switch (buf[0]) {
+	case 0:
+		break;
+	case 1:
+		sp_reg_write(anx78xx, TX_P0, SP_DP_TRAINING_PATTERN_SET_REG,
+			     0x04);
+		break;
+	case 2:
+		sp_reg_write(anx78xx, TX_P0, SP_DP_TRAINING_PATTERN_SET_REG,
+			     0x08);
+		break;
+	case 3:
+		sp_reg_write(anx78xx, TX_P0, SP_DP_TRAINING_PATTERN_SET_REG,
+			     0x0c);
+		break;
+	case 4:
+		/* 00249h - 0025Fh: Reserved for test automation extensions */
+		sp_dp_read_bytes_from_dpcd(anx78xx, 0x250, 10,
+					   buf);
+		for (i = 0; i < SP_DP_LT_80BIT_PATTERN_REG_NUM; i++) {
+			sp_reg_write(anx78xx, TX_P1,
+				     SP_DP_LT_80BIT_PATTERN0_REG + i,
+				     buf[0]);
+		}
+		sp_reg_write(anx78xx, TX_P0, SP_DP_TRAINING_PATTERN_SET_REG,
+			     0x30);
+		break;
+	case 5:
+		sp_reg_write(anx78xx, TX_P0, SP_DP_CEP_TRAINING_CTRL0_REG,
+			     0x00);
+		sp_reg_write(anx78xx, TX_P0, SP_DP_CEP_TRAINING_CTRL1_REG,
+			     0x01);
+		sp_reg_write(anx78xx, TX_P0, SP_DP_TRAINING_PATTERN_SET_REG,
+			     0x14);
+		break;
+	}
+
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_MAX_DOWNSPREAD, 1, buf);
+	dev_dbg(dev, "DPCD: max downspread = %.2x\n", buf[0]);
+	if (buf[0] & DP_PERCENT_DOWNSPREAD_0_5)
+		sp_config_ssc(anx78xx, SSC_DEP_4000PPM);
+	else
+		sp_downspreading_enable(anx78xx, false);
+
+	/* get swing and emphasis adjust request */
+	sp_reg_read(anx78xx, TX_P0, SP_DP_LANE0_LT_CTRL_REG, &b_sw);
+
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_ADJUST_REQUEST_LANE0_1, 1, buf);
+	dev_dbg(dev, "DPCD: 0x00206 = %.2x\n", buf[0]);
+	buf[0] &= DP_ADJUST_VOLTAGE_SWING_LANE0_MASK |
+		  DP_ADJUST_PRE_EMPHASIS_LANE0_MASK;
+	switch (buf[0]) {
+	case 0x00:
+	case 0x01:
+	case 0x02:
+	case 0x03:
+		sp_reg_write(anx78xx, TX_P0, SP_DP_LANE0_LT_CTRL_REG,
+			     (b_sw & ~SP_TX_SW_SET_MASK) | buf[0]);
+		break;
+	case 0x04:
+	case 0x05:
+	case 0x06:
+		sp_reg_write(anx78xx, TX_P0, SP_DP_LANE0_LT_CTRL_REG,
+			     (b_sw & ~SP_TX_SW_SET_MASK) |
+			     (buf[0] + 4));
+		break;
+	case 0x08:
+		sp_reg_write(anx78xx, TX_P0, SP_DP_LANE0_LT_CTRL_REG,
+			     (b_sw & ~SP_TX_SW_SET_MASK) | 0x10);
+		break;
+	case 0x09:
+		sp_reg_write(anx78xx, TX_P0, SP_DP_LANE0_LT_CTRL_REG,
+			     (b_sw & ~SP_TX_SW_SET_MASK) | 0x11);
+		break;
+	case 0x0c:
+		sp_reg_write(anx78xx, TX_P0, SP_DP_LANE0_LT_CTRL_REG,
+			     (b_sw & ~SP_TX_SW_SET_MASK) | 0x18);
+		break;
+	default:
+		break;
+	}
+
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_TEST_RESPONSE, 1, &response);
+	response |= DP_TEST_ACK;
+
+	return response;
+}
+
+static void sp_hpd_irq_process(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 val;
+	u8 test_vector;
+	u8 buf[6];
+
+	sp_dp_read_bytes_from_dpcd(anx78xx, DP_SINK_COUNT, 6, buf);
+	dev_dbg(dev, "got hpd irq %x\n", buf[1]);
+
+	if (buf[1] != 0)
+		sp_dp_write_bytes_to_dpcd(anx78xx, DP_DEVICE_SERVICE_IRQ_VECTOR,
+					  1, &buf[1]);
+
+	/* HDCP IRQ */
+	if ((buf[1] & DP_CP_IRQ) &&
+	    (sp.hdcp_state > HDCP_WAITING_FINISH ||
+	     sp.tx_system_state >= STATE_HDCP_AUTH)) {
+		sp_dp_read_bytes_from_dpcd(anx78xx, 0x068029, 1,
+					   &val);
+		if (val & 0x04) {
+			if (!sp_hdcp_repeater_mode(anx78xx)) {
+				sp_set_system_state(anx78xx, STATE_HDCP_AUTH);
+				sp_clean_hdcp_status(anx78xx);
+			} else {
+				sp.repeater_state = HDCP_ERROR;
+			}
+			dev_dbg(dev, "CP_IRQ, HDCP sync lost.\n");
+		}
+	}
+
+	/* PHY and Link CTS test */
+	if (buf[1] & DP_AUTOMATED_TEST_REQUEST) {
+		sp_dp_read_bytes_from_dpcd(anx78xx, DP_TEST_REQUEST, 1,
+					   &test_vector);
+
+		if (test_vector & DP_TEST_LINK_TRAINING) {
+			dev_dbg(dev, "LINK_TRAINING test requested\n");
+			sp.tx_test_lt = true;
+			val = sp_dp_autotest_link_training(anx78xx);
+			sp_dp_write_bytes_to_dpcd(anx78xx, DP_TEST_RESPONSE, 1,
+						  &val);
+
+			if (sp.tx_system_state >= STATE_LINK_TRAINING) {
+				sp.tx_lt_state = LT_INIT;
+				sp_set_system_state(anx78xx,
+						    STATE_LINK_TRAINING);
+			}
+		}
+
+		if (test_vector & DP_TEST_LINK_VIDEO_PATTERN) {
+			dev_dbg(dev, "VIDEO_PATTERN test requested\n");
+			sp_dp_read_bytes_from_dpcd(anx78xx, DP_TEST_RESPONSE, 1,
+						   &val);
+			val |= DP_TEST_ACK;
+			sp_dp_write_bytes_to_dpcd(anx78xx, DP_TEST_RESPONSE, 1,
+						  &val);
+		}
+
+		if (test_vector & DP_TEST_LINK_EDID_READ) {
+			dev_dbg(dev, "EDID test requested\n");
+			if (sp.tx_system_state > STATE_PARSE_EDID)
+				sp_set_system_state(anx78xx, STATE_PARSE_EDID);
+			sp.tx_test_edid = true;
+		}
+
+		if (test_vector & DP_TEST_LINK_PHY_TEST_PATTERN) {
+			dev_dbg(dev, "PHY_PATTERN test requested\n");
+			sp.tx_test_lt = true;
+			val = sp_autotest_phy_pattern(anx78xx);
+			sp_dp_write_bytes_to_dpcd(anx78xx, DP_TEST_RESPONSE, 1,
+						  &val);
+		}
+	}
+
+	if (sp.tx_system_state > STATE_LINK_TRAINING) {
+		if ((sp.tx_system_state == STATE_HDCP_AUTH) &&
+		    (buf[1] & DP_CP_IRQ)) {
+			dev_dbg(dev, "CP IRQ!\n");
+		} else if (!(buf[4] & DP_INTERLANE_ALIGN_DONE) || ((buf[2] &
+			  (DP_LANE_CR_DONE | DP_LANE_SYMBOL_LOCKED)) !=
+			  (DP_LANE_CR_DONE | DP_LANE_SYMBOL_LOCKED))) {
+			sp_set_system_state(anx78xx, STATE_LINK_TRAINING);
+			dev_dbg(dev, "IRQ: re-LT request!\n");
+			return;
+		}
+
+		dev_dbg(dev, "lane align %x\n", buf[4]);
+		dev_dbg(dev, "lane clock recovery %x\n", buf[2]);
+	}
+}
+
+static void sp_auth_done_int_handler(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 buf[2];
+
+	if (sp_hdcp_repeater_mode(anx78xx)) {
+		sp_reg_read(anx78xx, TX_P0, SP_TX_HDCP_STATUS_REG, &buf[0]);
+		if ((buf[0] & SP_AUTHEN_PASS) &&
+		    (sp.repeater_state == HDCP_DOING))
+			sp.repeater_state = HDCP_DONE;
+		else
+			sp.repeater_state = HDCP_ERROR;
+
+		return;
+	}
+
+	if (sp.hdcp_state > HDCP_HW_ENABLE &&
+	    sp.tx_system_state == STATE_HDCP_AUTH) {
+		sp_reg_read(anx78xx, TX_P0, SP_HDCP_RX_BSTATUS0_REG, &buf[0]);
+		sp_reg_read(anx78xx, TX_P0, SP_HDCP_RX_BSTATUS1_REG, &buf[1]);
+		if ((buf[0] & 0x08) || (buf[1] & 0x80)) {
+			dev_dbg(dev, "max cascade/devs exceeded!\n");
+			sp_hdcp_encryption_disable(anx78xx);
+			sp.hdcp_state = HDCP_FINISH;
+		} else {
+			sp_reg_read(anx78xx, TX_P0, SP_TX_HDCP_STATUS_REG,
+				    buf);
+		}
+
+		if (buf[0] & SP_AUTHEN_PASS) {
+			sp_dp_read_bytes_from_dpcd(anx78xx, 0x06802a, 2, buf);
+			if ((buf[0] & 0x08) || (buf[1] & 0x80)) {
+				dev_dbg(dev, "max cascade/devs exceeded!\n");
+				sp_hdcp_encryption_disable(anx78xx);
+			} else
+				dev_dbg(dev, "%s\n",
+					"authentication pass in Auth Done");
+
+			sp.hdcp_state = HDCP_FINISH;
+		} else {
+			dev_err(dev, "authentication failed in Auth Done\n");
+			sp_video_mute(anx78xx, true);
+			sp_clean_hdcp_status(anx78xx);
+			sp.hdcp_state = HDCP_FAILED;
+		}
+	}
+}
+
+static void sp_lt_done_int_handler(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 val;
+
+	if (sp.tx_lt_state == LT_WAITING_FINISH &&
+	    sp.tx_system_state == STATE_LINK_TRAINING) {
+		sp_reg_read(anx78xx, TX_P0, SP_DP_LT_CTRL_REG, &val);
+		if (val & SP_LT_ERROR_TYPE_MASK) {
+			val = (val & SP_LT_ERROR_TYPE_MASK) >> 4;
+			dev_dbg(dev, "LT failed in interrupt %.2x\n",
+				val);
+			sp.tx_lt_state = LT_ERROR;
+		} else {
+			dev_dbg(dev, "LT finish\n");
+			sp.tx_lt_state = LT_FINISH;
+		}
+	}
+}
+
+static void sp_hdmi_clk_det_int(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+
+	dev_dbg(dev, "pixel clock change\n");
+	if (sp.tx_system_state > STATE_VIDEO_OUTPUT) {
+		sp_video_mute(anx78xx, true);
+		sp_enable_audio_output(anx78xx, false);
+		sp_set_system_state(anx78xx, STATE_VIDEO_OUTPUT);
+	}
+}
+
+static void sp_hdmi_dvi_int(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 val;
+
+	sp_reg_read(anx78xx, RX_P0, SP_HDMI_STATUS_REG, &val);
+	if ((val & SP_HDMI_DET) == SP_DVI_MODE) {
+		dev_dbg(dev, "detected DVI MODE -> mute audio\n");
+		sp_hdmi_mute_audio(anx78xx, true);
+		sp_set_system_state(anx78xx, STATE_LINK_TRAINING);
+	}
+}
+
+static void sp_hdmi_new_avi_int(struct anx78xx *anx78xx)
+{
+	sp_avi_infoframe_init(anx78xx);
+	sp_config_packets(anx78xx, HDMI_INFOFRAME_TYPE_AVI);
+	sp_set_colorspace(anx78xx);
+	sp_lvttl_bit_mapping(anx78xx);
+}
+
+static void sp_hdmi_new_vsi_int(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 v3d_struct;
+
+	sp_reg_clear_bits(anx78xx, TX_P0, SP_DP_3D_VSC_CTRL_REG,
+			  SP_INFO_FRAME_VSC_EN);
+
+	sp_vsi_infoframe_init(anx78xx);
+	sp_config_packets(anx78xx, HDMI_INFOFRAME_TYPE_VENDOR);
+
+	switch (sp.frame.vendor.hdmi.s3d_struct) {
+	case HDMI_3D_STRUCTURE_FRAME_PACKING:
+		v3d_struct = 0x02;
+		break;
+	case HDMI_3D_STRUCTURE_LINE_ALTERNATIVE:
+		v3d_struct = 0x03;
+		break;
+	case HDMI_3D_STRUCTURE_SIDE_BY_SIDE_FULL:
+		v3d_struct = 0x04;
+		break;
+	case HDMI_3D_STRUCTURE_INVALID:
+	default:
+		v3d_struct = 0x00;
+		dev_dbg(dev, "3D structure not supported\n");
+		break;
+	}
+	sp_reg_write(anx78xx, TX_P0, SP_DP_VSC_DB1_REG, v3d_struct);
+
+	sp_reg_set_bits(anx78xx, TX_P0, SP_DP_3D_VSC_CTRL_REG,
+			SP_INFO_FRAME_VSC_EN);
+	sp_reg_clear_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG,
+			  SP_SPD_IF_EN);
+	sp_reg_set_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG, SP_SPD_IF_UD);
+	sp_reg_set_bits(anx78xx, TX_P0, SP_PACKET_SEND_CTRL_REG, SP_SPD_IF_EN);
+}
+
+static void sp_hdmi_no_vsi_int(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 val;
+
+	sp_reg_read(anx78xx, TX_P0, SP_DP_3D_VSC_CTRL_REG, &val);
+	if (val & SP_INFO_FRAME_VSC_EN) {
+		dev_dbg(dev, "no new VSI is received, disable VSC packet\n");
+		val &= ~SP_INFO_FRAME_VSC_EN;
+		sp_reg_write(anx78xx, TX_P0, SP_DP_3D_VSC_CTRL_REG, val);
+		sp_mpeg_infoframe_init(anx78xx);
+		sp_config_packets(anx78xx, HDMI_INFOFRAME_TYPE_MPEG);
+	}
+}
+
+static inline void sp_hdmi_restart_audio_chk(struct anx78xx *anx78xx)
+{
+	sp_set_system_state(anx78xx, STATE_AUDIO_OUTPUT);
+}
+
+static void sp_hdmi_cts_rcv_int(struct anx78xx *anx78xx)
+{
+	if (sp.tx_ao_state == AO_INIT)
+		sp.tx_ao_state = AO_CTS_RCV_INT;
+	else if (sp.tx_ao_state == AO_AUDIO_RCV_INT)
+		sp.tx_ao_state = AO_RCV_INT_FINISH;
+}
+
+static void sp_hdmi_audio_rcv_int(struct anx78xx *anx78xx)
+{
+	if (sp.tx_ao_state == AO_INIT)
+		sp.tx_ao_state = AO_AUDIO_RCV_INT;
+	else if (sp.tx_ao_state == AO_CTS_RCV_INT)
+		sp.tx_ao_state = AO_RCV_INT_FINISH;
+}
+
+static void sp_hdmi_audio_samplechg_int(struct anx78xx *anx78xx)
+{
+	u16 i;
+	u8 val;
+
+	/* transfer audio channel status from HDMI Rx to Slimport Tx */
+	for (i = 0; i < SP_AUD_CH_STATUS_REG_NUM; i++) {
+		sp_reg_read(anx78xx, RX_P0, SP_AUD_SPDIF_CH_STATUS_BASE + i,
+			    &val);
+		sp_reg_write(anx78xx, TX_P2, SP_AUD_CH_STATUS_BASE + i,
+			     val);
+	}
+}
+
+static void sp_hdmi_hdcp_error_int(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+
+	if (sp.hdcp_error_count >= 40) {
+		sp.hdcp_error_count = 0;
+		dev_dbg(dev, "lots of HDCP errors occurred!\n");
+		sp_hdmi_mute_audio(anx78xx, true);
+		sp_hdmi_mute_video(anx78xx, true);
+		sp_hdmi_set_hpd(anx78xx, false);
+		usleep_range(10000, 11000);
+		sp_hdmi_set_hpd(anx78xx, true);
+	} else {
+		sp.hdcp_error_count++;
+	}
+}
+
+static void sp_hdmi_new_gcp_int(struct anx78xx *anx78xx)
+{
+	u8 val;
+
+	sp_reg_read(anx78xx, RX_P1, SP_GENERAL_CTRL_PACKET_REG, &val);
+	if (val & SP_SET_AVMUTE) {
+		sp_hdmi_mute_video(anx78xx, true);
+		sp_hdmi_mute_audio(anx78xx, true);
+	} else if (val & SP_CLEAR_AVMUTE) {
+		sp_hdmi_mute_video(anx78xx, false);
+		sp_hdmi_mute_audio(anx78xx, false);
+	}
+}
+
+static void sp_hpd_int_handler(struct anx78xx *anx78xx, u8 hpd_source)
+{
+	u8 val;
+	struct device *dev = &anx78xx->client->dev;
+
+	switch (hpd_source) {
+	case SP_HPD_LOST:
+		dev_dbg(dev, "HPD: cable is pulled out\n");
+		sp_hdmi_set_hpd(anx78xx, false);
+		sp_set_system_state(anx78xx, STATE_CABLE_UNPLUGGED);
+		break;
+	case SP_HPD_CHG:
+		dev_dbg(dev, "HPD: hotplug change detected\n");
+		usleep_range(2000, 4000);
+		if (sp.common_int[3] & SP_HPD_IRQ)
+			sp_hpd_irq_process(anx78xx);
+
+		sp_reg_read(anx78xx, TX_P0, SP_DP_SYSTEM_CTRL_BASE + 3, &val);
+		if (val & SP_HPD_STATUS) {
+			if (sp.common_int[3] & SP_HPD_IRQ)
+				sp_hpd_irq_process(anx78xx);
+		} else {
+			sp_reg_read(anx78xx, TX_P0,
+				    SP_DP_SYSTEM_CTRL_BASE + 3,
+				    &val);
+			if (val & SP_HPD_STATUS) {
+				sp_hdmi_set_hpd(anx78xx, false);
+				sp_set_system_state(anx78xx,
+						    STATE_WAITING_CABLE_PLUG);
+			}
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void sp_system_isr_handler(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+
+	if (sp.common_int[3] & SP_HPD_LOST)
+		sp_hpd_int_handler(anx78xx, SP_HPD_LOST);
+	else if (sp.common_int[3] & SP_HPD_CHG)
+		sp_hpd_int_handler(anx78xx, SP_HPD_CHG);
+
+	if (sp.common_int[0] & SP_PLL_LOCK_CHG)
+		sp_pll_changed_int_handler(anx78xx);
+
+	if (sp.common_int[1] & SP_HDCP_AUTH_DONE)
+		sp_auth_done_int_handler(anx78xx);
+
+	if ((sp.common_int[2] & SP_HDCP_LINK_CHECK_FAIL) &&
+	    !sp_hdcp_repeater_mode(anx78xx)) {
+		sp_set_system_state(anx78xx, STATE_LINK_TRAINING);
+		dev_dbg(dev, "HDCP Sync Lost!\n");
+	}
+
+	if (sp.dp_int & SP_TRAINING_FINISH)
+		sp_lt_done_int_handler(anx78xx);
+
+	if (sp.tx_system_state > STATE_SINK_CONNECTION) {
+		if (sp.sp_hdmi_int[5] & SP_NEW_AVI_PKT)
+			sp_hdmi_new_avi_int(anx78xx);
+	}
+
+	if (sp.tx_system_state > STATE_VIDEO_OUTPUT) {
+		if (sp.sp_hdmi_int[6] & SP_NEW_VS) {
+			sp.sp_hdmi_int[6] &= ~SP_NO_VSI;
+			sp_hdmi_new_vsi_int(anx78xx);
+		}
+		if (sp.sp_hdmi_int[6] & SP_NO_VSI)
+			sp_hdmi_no_vsi_int(anx78xx);
+	}
+
+	if (sp.tx_system_state >= STATE_VIDEO_OUTPUT) {
+		if (sp.sp_hdmi_int[0] & SP_CKDT_CHG)
+			sp_hdmi_clk_det_int(anx78xx);
+
+		if (sp.sp_hdmi_int[0] & SP_SCDT_CHG)
+			dev_dbg(dev, "HDCP Sync Detected\n");
+
+		if (sp.sp_hdmi_int[0] & SP_HDMI_DVI)
+			sp_hdmi_dvi_int(anx78xx);
+
+		if ((sp.sp_hdmi_int[5] & SP_NEW_AUD_PKT) ||
+		    (sp.sp_hdmi_int[2] & SP_AUD_MODE_CHG))
+			sp_hdmi_restart_audio_chk(anx78xx);
+
+		if (sp.sp_hdmi_int[5] & SP_CTS_RCV)
+			sp_hdmi_cts_rcv_int(anx78xx);
+
+		if (sp.sp_hdmi_int[4] & SP_AUDIO_RCV)
+			sp_hdmi_audio_rcv_int(anx78xx);
+
+		if (sp.sp_hdmi_int[1] & SP_HDCP_ERR)
+			sp_hdmi_hdcp_error_int(anx78xx);
+
+		if (sp.sp_hdmi_int[5] & SP_NEW_CP_PKT)
+			sp_hdmi_new_gcp_int(anx78xx);
+
+		if (sp.sp_hdmi_int[1] & SP_AUDIO_SAMPLE_CHG)
+			sp_hdmi_audio_samplechg_int(anx78xx);
+	}
+}
+
+static void sp_show_information(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u8 val, val1;
+	u16 h_res, h_act, v_res, v_act;
+	u16 h_fp, h_sw, h_bp, v_fp, v_sw, v_bp;
+	unsigned long refresh;
+	unsigned long pclk;
+
+	dev_dbg(dev, "\n************* SP Video Information **************\n");
+
+	switch (sp_get_link_bandwidth(anx78xx)) {
+	case DP_LINK_BW_1_62:
+		dev_dbg(dev, "BW = 1.62G\n");
+		break;
+	case DP_LINK_BW_2_7:
+		dev_dbg(dev, "BW = 2.7G\n");
+		break;
+	case DP_LINK_BW_5_4:
+		dev_dbg(dev, "BW = 5.4G\n");
+		break;
+	case DP_LINK_BW_6_75:
+		dev_dbg(dev, "BW = 6.75G\n");
+		break;
+	default:
+		break;
+	}
+
+	pclk = sp_pclk_calc(anx78xx);
+	pclk = pclk / 10;
+
+	sp_reg_read(anx78xx, TX_P2, SP_TOTAL_LINE_STAL_REG, &val);
+	sp_reg_read(anx78xx, TX_P2, SP_TOTAL_LINE_STAH_REG, &val1);
+
+	v_res = val1;
+	v_res = v_res << 8;
+	v_res = v_res + val;
+
+	sp_reg_read(anx78xx, TX_P2, SP_ACT_LINE_STAL_REG, &val);
+	sp_reg_read(anx78xx, TX_P2, SP_ACT_LINE_STAH_REG, &val1);
+
+	v_act = val1;
+	v_act = v_act << 8;
+	v_act = v_act + val;
+
+	sp_reg_read(anx78xx, TX_P2, SP_TOTAL_PIXEL_STAL_REG, &val);
+	sp_reg_read(anx78xx, TX_P2, SP_TOTAL_PIXEL_STAH_REG, &val1);
+
+	h_res = val1;
+	h_res = h_res << 8;
+	h_res = h_res + val;
+
+	sp_reg_read(anx78xx, TX_P2, SP_ACT_PIXEL_STAL_REG, &val);
+	sp_reg_read(anx78xx, TX_P2, SP_ACT_PIXEL_STAH_REG, &val1);
+
+	h_act = val1;
+	h_act = h_act << 8;
+	h_act = h_act + val;
+
+	sp_reg_read(anx78xx, TX_P2, SP_H_F_PORCH_STAL_REG, &val);
+	sp_reg_read(anx78xx, TX_P2, SP_H_F_PORCH_STAH_REG, &val1);
+
+	h_fp = val1;
+	h_fp = h_fp << 8;
+	h_fp = h_fp + val;
+
+	sp_reg_read(anx78xx, TX_P2, SP_H_SYNC_STAL_REG, &val);
+	sp_reg_read(anx78xx, TX_P2, SP_H_SYNC_STAH_REG, &val1);
+
+	h_sw = val1;
+	h_sw = h_sw << 8;
+	h_sw = h_sw + val;
+
+	sp_reg_read(anx78xx, TX_P2, SP_H_B_PORCH_STAL_REG, &val);
+	sp_reg_read(anx78xx, TX_P2, SP_H_B_PORCH_STAH_REG, &val1);
+
+	h_bp = val1;
+	h_bp = h_bp << 8;
+	h_bp = h_bp + val;
+
+	sp_reg_read(anx78xx, TX_P2, SP_V_F_PORCH_STA_REG, &val);
+	v_fp = val;
+
+	sp_reg_read(anx78xx, TX_P2, SP_V_SYNC_STA_REG, &val);
+	v_sw = val;
+
+	sp_reg_read(anx78xx, TX_P2, SP_V_B_PORCH_STA_REG, &val);
+	v_bp = val;
+
+	dev_dbg(dev, "total resolution is %d * %d\n", h_res, v_res);
+
+	dev_dbg(dev, "HF=%d, HSW=%d, HBP=%d\n", h_fp, h_sw, h_bp);
+	dev_dbg(dev, "VF=%d, VSW=%d, VBP=%d\n", v_fp, v_sw, v_bp);
+
+	if (h_res == 0 || v_res == 0) {
+		refresh = 0;
+	} else {
+		refresh = pclk * 1000000;
+		refresh = DIV_ROUND_CLOSEST(refresh, h_res);
+		refresh = DIV_ROUND_CLOSEST(refresh, v_res);
+	}
+
+	dev_dbg(dev, "active resolution is %d * %d @ %ldHz\n", h_act, v_act,
+		refresh);
+
+	sp_reg_read(anx78xx, TX_P0, SP_DP_VIDEO_CTRL_REG, &val);
+
+	val &= SP_COLOR_F_MASK;
+	val >>= SP_COLOR_F_SHIFT;
+	if (val == HDMI_COLORSPACE_RGB)
+		dev_dbg(dev, "colorspace: RGB");
+	else if (val == HDMI_COLORSPACE_YUV422)
+		dev_dbg(dev, "colorspace: YCbCr422");
+	else if (val == HDMI_COLORSPACE_YUV444)
+		dev_dbg(dev, "colorspace: YCbCr444");
+
+	sp_reg_read(anx78xx, TX_P0, SP_DP_VIDEO_CTRL_REG, &val);
+
+	val &= SP_BPC_MASK;
+	val >>= SP_BPC_SHIFT;
+	if (val  == SP_BPC_6BITS)
+		dev_dbg(dev, "6 BPC\n");
+	else if (val == SP_BPC_8BITS)
+		dev_dbg(dev, "8 BPC\n");
+	else if (val == SP_BPC_10BITS)
+		dev_dbg(dev, "10 BPC\n");
+	else if (val == SP_BPC_12BITS)
+		dev_dbg(dev, "12 BPC\n");
+
+	if (is_anx_dongle(anx78xx)) {
+		/*
+		 * 00503h - 005FFh: RESERVED for Branch Device vendor-specific
+		 * usage
+		 */
+		sp_dp_read_bytes_from_dpcd(anx78xx, 0x0523, 1, &val);
+		dev_dbg(dev, "Analogix Dongle FW Ver %.2x\n", val & 0x7f);
+	}
+
+	dev_dbg(dev, "\n**************************************************\n");
+}
+
+static void sp_hdcp_repeater_reauth(struct anx78xx *anx78xx)
+{
+	u8 val, ctrl, status;
+	struct device *dev = &anx78xx->client->dev;
+
+	msleep(50);
+	sp_reg_read(anx78xx, RX_P1, SP_RX_HDCP_STATUS_REG, &val);
+
+	if (val & SP_AUTH_EN) {
+		sp_reg_read(anx78xx, TX_P0, SP_HDCP_CTRL0_REG, &ctrl);
+		if (ctrl & SP_HARD_AUTH_EN) {
+			sp_reg_read(anx78xx, TX_P0, SP_TX_HDCP_STATUS_REG,
+				    &status);
+			if (!(status & SP_AUTHEN_PASS) &&
+			    (status & SP_AUTH_FAIL)) {
+				dev_dbg(dev, "clean HDCP and re-auth\n");
+				sp.repeater_state = HDCP_ERROR;
+			}
+		} else {
+			dev_dbg(dev, "repeater mode, enable HW HDCP\n");
+			sp.repeater_state = HDCP_ERROR;
+		}
+	}
+
+	sp_reg_read(anx78xx, TX_P0, SP_HDCP_CTRL0_REG, &ctrl);
+	sp_reg_read(anx78xx, TX_P0, SP_TX_HDCP_STATUS_REG, &status);
+
+	if ((ctrl == SP_HDCP_FUNCTION_ENABLED) && (status & SP_AUTH_FAIL)) {
+		dev_dbg(dev, "HDCP encryption failure 0x%02x\n", status);
+		sp.repeater_state = HDCP_ERROR;
+	}
+
+	if (sp.repeater_state == HDCP_ERROR) {
+		sp_clean_hdcp_status(anx78xx);
+		msleep(50);
+		/* Clear HDCP AUTH interrupt */
+		sp_reg_set_bits(anx78xx, TX_P2, SP_COMMON_INT_STATUS_BASE + 2,
+				SP_HDCP_AUTH_DONE);
+		sp_hw_hdcp_enable(anx78xx);
+		sp.repeater_state = HDCP_DOING;
+	}
+}
+
+/**
+ * sp_main_process(): SlimPort Main Process
+ *
+ * SlimPort Main Process States:
+ * 0. Cable pulled out.
+ *    - Power down device.
+ * 1. SlimPort plug
+ *    - Power on device
+ * 2. SlimPort initialization
+ *    - Enable the power supply for downstream
+ *    - Power on the register access
+ *    - Initialize the related registers
+ * 3. Sink connection
+ *     - Get the cable type (HDMI, VGA or MyDP)
+ *     - Check the connection with downstream
+ * 4. Read EDID
+ *    - Read partial EDID data to decide whether to re-read entire EDID
+ *    - EDID read
+ *    - Parse EDID to get the video bandwidth
+ * 5. Link training
+ *    - Check the downstream bandwidth
+ *    - Hardware link training
+ * 6. Video output
+ *    - Verify that input video is stable
+ *    - Order by the input video to calculate the bandwidth
+ *    - Set AVI packet, bit-mapping, color depth, etc.
+ * 7. HDCP authentication
+ *    - Verify that HDCP is supported
+ *    - Enable hardware HDCP
+ * 8. Audio output
+ *    - Automatic audio M valu adjustment
+ *    - Configure audio multichannel
+ *    - Set audio packet
+ * 9. Playback
+ *    - The normal system working state
+ *
+ */
+bool sp_main_process(struct anx78xx *anx78xx)
+{
+	/*
+	 * Process the interrupts
+	 */
+	if (sp.tx_system_state > STATE_WAITING_CABLE_PLUG) {
+		/* Interrupt receiver */
+		sp_int_receiver(anx78xx);
+
+		/* Task handler */
+		sp_system_isr_handler(anx78xx);
+
+		/* If device; supports HDCP repeater function re-auth */
+		if (sp_hdcp_repeater_mode(anx78xx))
+			sp_hdcp_repeater_reauth(anx78xx);
+/*
+		if (!sp.hdcp_enabled) {
+			sp_set_system_state(anx78xx, STATE_HDCP_AUTH);
+			sp.hdcp_enabled = true;
+		}
+*/
+	}
+
+	/*
+	 * SlimPort State Process
+	 */
+	switch (sp.tx_system_state) {
+	case STATE_CABLE_UNPLUGGED:
+		sp_variable_init(anx78xx);
+		anx78xx_poweroff(anx78xx);
+		return false;
+	case STATE_WAITING_CABLE_PLUG:
+		sp_variable_init(anx78xx);
+		anx78xx_poweron(anx78xx);
+		sp.tx_system_state = STATE_SP_INITIALIZED;
+		sp_print_system_state(anx78xx, sp.tx_system_state);
+	/* fallthrough */
+	case STATE_SP_INITIALIZED:
+		sp_initialization(anx78xx);
+		sp.tx_system_state = STATE_SINK_CONNECTION;
+		sp_print_system_state(anx78xx, sp.tx_system_state);
+	/* fallthrough */
+	case STATE_SINK_CONNECTION:
+		if (sp_get_dp_connection(anx78xx)) {
+			sp.tx_system_state = STATE_PARSE_EDID;
+			sp_print_system_state(anx78xx, sp.tx_system_state);
+		} else {
+			break;
+		}
+	/* fallthrough */
+	case STATE_PARSE_EDID:
+		if (sp_edid_process(anx78xx)) {
+			sp.tx_system_state = STATE_LINK_TRAINING;
+			sp_print_system_state(anx78xx, sp.tx_system_state);
+		} else {
+			break;
+		}
+	/* fallthrough */
+	case STATE_LINK_TRAINING:
+		if (sp_link_training(anx78xx)) {
+			sp.tx_system_state = STATE_VIDEO_OUTPUT;
+			sp_print_system_state(anx78xx, sp.tx_system_state);
+		} else {
+			break;
+		}
+	/* fallthrough */
+	case STATE_VIDEO_OUTPUT:
+		if (sp_config_video_output(anx78xx)) {
+			sp.tx_system_state = STATE_HDCP_AUTH;
+			sp_print_system_state(anx78xx, sp.tx_system_state);
+		} else {
+			break;
+		}
+	/* fallthrough */
+	case STATE_HDCP_AUTH:
+		if (!sp_hdcp_repeater_mode(anx78xx)) {
+			if (sp_hdcp_process(anx78xx)) {
+				sp.tx_system_state = STATE_AUDIO_OUTPUT;
+				sp_print_system_state(anx78xx,
+						      sp.tx_system_state);
+			} else {
+				break;
+			}
+		} else {
+			sp.tx_system_state = STATE_AUDIO_OUTPUT;
+		}
+	/* fallthrough */
+	case STATE_AUDIO_OUTPUT:
+		if (sp_config_audio_output(anx78xx)) {
+			sp.tx_system_state = STATE_PLAY_BACK;
+			sp_print_system_state(anx78xx, sp.tx_system_state);
+		} else {
+			break;
+		}
+	/* fallthrough */
+	case STATE_PLAY_BACK:
+	default:
+		break;
+	}
+
+	return true;
+}
+
+/**
+ * sp_system_init(): System initialization
+ *
+ * @anx78xx: SlimPort device.
+ *
+ * A value of zero will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+int sp_system_init(struct anx78xx *anx78xx)
+{
+	struct device *dev = &anx78xx->client->dev;
+	u16 id;
+	u8 idh = 0, idl = 0;
+	int i;
+
+	sp_variable_init(anx78xx);
+
+	anx78xx_poweron(anx78xx);
+
+	/* check chip id */
+	sp_reg_read(anx78xx, TX_P2, SP_DEVICE_IDL_REG, &idl);
+	sp_reg_read(anx78xx, TX_P2, SP_DEVICE_IDH_REG, &idh);
+	id = idl | (idh << 8);
+
+	for (i = 0; i < ARRAY_SIZE(chipid_list); i++) {
+		if (id == chipid_list[i])
+			return 0;
+	}
+
+	anx78xx_poweroff(anx78xx);
+
+	dev_err(dev, "failed to detect ANX%x\n", id);
+
+	return -ENODEV;
+}
diff --git a/drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.h b/drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.h
new file mode 100644
index 0000000..08eabc9
--- /dev/null
+++ b/drivers/gpu/drm/bridge/anx78xx/slimport_tx_drv.h
@@ -0,0 +1,110 @@
+/*
+ * Copyright(c) 2015, Analogix Semiconductor. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __SLIMPORT_TX_DRV_H
+#define __SLIMPORT_TX_DRV_H
+
+#include <linux/hdmi.h>
+
+#include "anx78xx.h"
+#include "slimport_tx_reg.h"
+
+#define FW_VERSION	0x23
+
+enum sp_tx_state {
+	STATE_CABLE_UNPLUGGED,
+	STATE_WAITING_CABLE_PLUG,
+	STATE_SP_INITIALIZED,
+	STATE_SINK_CONNECTION,
+	STATE_PARSE_EDID,
+	STATE_LINK_TRAINING,
+	STATE_VIDEO_OUTPUT,
+	STATE_HDCP_AUTH,
+	STATE_AUDIO_OUTPUT,
+	STATE_PLAY_BACK
+};
+
+enum sp_tx_power_block {
+	SP_TX_PWR_REG = SP_REGISTER_PD,
+	SP_TX_PWR_HDCP = SP_HDCP_PD,
+	SP_TX_PWR_AUDIO = SP_AUDIO_PD,
+	SP_TX_PWR_VIDEO = SP_VIDEO_PD,
+	SP_TX_PWR_LINK = SP_LINK_PD,
+	SP_TX_PWR_TOTAL = SP_TOTAL_PD,
+	SP_TX_PWR_NUMS
+};
+
+enum sp_tx_lt_status {
+	LT_INIT,
+	LT_WAIT_PLL_LOCK,
+	LT_CHECK_LINK_BW,
+	LT_START,
+	LT_WAITING_FINISH,
+	LT_ERROR,
+	LT_FINISH,
+};
+
+enum hdcp_status {
+	HDCP_CAPABLE_CHECK,
+	HDCP_WAITING_VID_STB,
+	HDCP_HW_ENABLE,
+	HDCP_WAITING_FINISH,
+	HDCP_FINISH,
+	HDCP_FAILED,
+	HDCP_NOT_SUPPORTED,
+};
+
+enum repeater_status {
+	HDCP_DONE,
+	HDCP_DOING,
+	HDCP_ERROR,
+};
+
+enum video_output_status {
+	VO_WAIT_VIDEO_STABLE,
+	VO_WAIT_TX_VIDEO_STABLE,
+	VO_CHECK_VIDEO_INFO,
+	VO_FINISH,
+};
+
+enum audio_output_status {
+	AO_INIT,
+	AO_CTS_RCV_INT,
+	AO_AUDIO_RCV_INT,
+	AO_RCV_INT_FINISH,
+	AO_OUTPUT,
+};
+
+enum sp_ssc_dep {
+	SSC_DEP_DISABLE = 0x0,
+	SSC_DEP_500PPM,
+	SSC_DEP_1000PPM,
+	SSC_DEP_1500PPM,
+	SSC_DEP_2000PPM,
+	SSC_DEP_2500PPM,
+	SSC_DEP_3000PPM,
+	SSC_DEP_3500PPM,
+	SSC_DEP_4000PPM,
+	SSC_DEP_4500PPM,
+	SSC_DEP_5000PPM,
+	SSC_DEP_5500PPM,
+	SSC_DEP_6000PPM
+};
+
+bool sp_main_process(struct anx78xx *anx78xx);
+int sp_system_init(struct anx78xx *anx78xx);
+void sp_variable_init(struct anx78xx *anx78xx);
+u8 sp_get_link_bandwidth_from_edid(struct anx78xx *anx78xx);
+
+#endif
diff --git a/drivers/gpu/drm/bridge/anx78xx/slimport_tx_reg.h b/drivers/gpu/drm/bridge/anx78xx/slimport_tx_reg.h
new file mode 100644
index 0000000..26c3bad
--- /dev/null
+++ b/drivers/gpu/drm/bridge/anx78xx/slimport_tx_reg.h
@@ -0,0 +1,737 @@
+/*
+ * Copyright(c) 2015, Analogix Semiconductor. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __SLIMPORT_TX_REG_DEF_H
+#define __SLIMPORT_TX_REG_DEF_H
+
+#define TX_P0				0x70
+#define TX_P1				0x7a
+#define TX_P2				0x72
+
+#define RX_P0				0x7e
+#define RX_P1				0x80
+
+/***************************************************************/
+/* Register definition of device address 0x7e                  */
+/***************************************************************/
+
+/*
+ * System Control and Status
+ */
+
+/* Software Reset Register 1 */
+#define SP_SOFTWARE_RESET1_REG		0x11
+#define SP_VIDEO_RST			BIT(4)
+#define SP_HDCP_MAN_RST			BIT(2)
+#define SP_TMDS_RST			BIT(1)
+#define SP_SW_MAN_RST			BIT(0)
+
+/* System Status Register */
+#define SP_SYSTEM_STATUS_REG		0x14
+#define SP_TMDS_CLOCK_DET		BIT(1)
+#define SP_TMDS_DE_DET			BIT(0)
+
+/* HDMI Status Register */
+#define SP_HDMI_STATUS_REG		0x15
+#define SP_HDMI_AUD_LAYOUT		BIT(3)
+#define SP_HDMI_DET			BIT(0)
+#  define SP_DVI_MODE			0
+#  define SP_HDMI_MODE			1
+
+/* HDMI Mute Control Register */
+#define SP_HDMI_MUTE_CTRL_REG		0x16
+#define SP_AUD_MUTE			BIT(1)
+#define SP_VID_MUTE			BIT(0)
+
+/* System Power Down Register 1 */
+#define SP_SYSTEM_POWER_DOWN1_REG	0x18
+#define SP_PWDN_CTRL			BIT(0)
+
+/*
+ * Audio and Video Auto Control
+ */
+
+/* Auto Audio and Video Control register */
+#define SP_AUDVID_CTRL_REG		0x20
+#define SP_AVC_OE			BIT(7)
+#define SP_AAC_OE			BIT(6)
+#define SP_AVC_EN			BIT(1)
+#define SP_AAC_EN			BIT(0)
+
+/* Audio Exception Enable Registers */
+#define SP_AUD_EXCEPTION_ENABLE_BASE	(0x24 - 1)
+/* Bits for Audio Exception Enable Register 3 */
+#define SP_AEC_EN21			BIT(5)
+
+/*
+ * Interrupt
+ */
+
+/* Interrupt Status Register 1 */
+#define SP_INT_STATUS1_REG		0x31
+/* Bits for Interrupt Status Register 1 */
+#define SP_HDMI_DVI			BIT(7)
+#define SP_CKDT_CHG			BIT(6)
+#define SP_SCDT_CHG			BIT(5)
+#define SP_PCLK_CHG			BIT(4)
+#define SP_PLL_UNLOCK			BIT(3)
+#define SP_CABLE_PLUG_CHG		BIT(2)
+#define SP_SET_MUTE			BIT(1)
+#define SP_SW_INTR			BIT(0)
+/* Bits for Interrupt Status Register 2 */
+#define SP_HDCP_ERR			BIT(5)
+#define SP_AUDIO_SAMPLE_CHG		BIT(0)	/* undocumented */
+/* Bits for Interrupt Status Register 3 */
+#define SP_AUD_MODE_CHG			BIT(0)
+/* Bits for Interrupt Status Register 5 */
+#define SP_AUDIO_RCV			BIT(0)
+/* Bits for Interrupt Status Register 6 */
+#define SP_CTS_RCV			BIT(7)
+#define SP_NEW_AUD_PKT			BIT(4)
+#define SP_NEW_AVI_PKT			BIT(1)
+#define SP_NEW_CP_PKT			BIT(0)
+/* Bits for Interrupt Status Register 7 */
+#define SP_NO_VSI			BIT(7)
+#define SP_NEW_VS			BIT(4)
+
+/* Interrupt Mask Status Registers */
+#define SP_INT_MASK_BASE		(0x41 - 1)
+
+/* HDMI US TIMER Control Register */
+#define SP_HDMI_US_TIMER_CTRL_REG	0x49
+#define SP_MS_TIMER_MARGIN_10_8_MASK	0x07
+
+/*
+ * TMDS Control
+ */
+
+/* TMDS Control Registers */
+#define SP_TMDS_CTRL_BASE		(0x50 - 1)
+/* Bits for TMDS Control Register 7 */
+#define SP_PD_RT			BIT(0)
+
+/*
+ * Video Control
+ */
+
+/* Video Status Register */
+#define SP_VIDEO_STATUS_REG		0x70
+#define SP_COLOR_DEPTH_MASK		0xf0
+#define SP_COLOR_DEPTH_SHIFT		4
+#  define SP_COLOR_DEPTH_MODE_LEGACY	0x00
+#  define SP_COLOR_DEPTH_MODE_24BIT	0x04
+#  define SP_COLOR_DEPTH_MODE_30BIT	0x05
+#  define SP_COLOR_DEPTH_MODE_36BIT	0x06
+#  define SP_COLOR_DEPTH_MODE_48BIT	0x07
+
+/* Video Data Range Control Register */
+#define SP_VID_DATA_RANGE_CTRL_REG	0x83
+#define SP_R2Y_INPUT_LIMIT		BIT(1)
+
+/* Pixel Clock High Resolution Counter Registers */
+#define SP_PCLK_HIGHRES_CNT_BASE	(0x8c - 1)
+
+/*
+ * Audio Control
+ */
+
+/* Number of Audio Channels Status Registers */
+#define SP_AUD_CH_STATUS_REG_NUM	6
+
+/* Audio IN S/PDIF Channel Status Registers */
+#define SP_AUD_SPDIF_CH_STATUS_BASE	0xc7
+
+/* Audio IN S/PDIF Channel Status Register 4 */
+#define SP_FS_FREQ_MASK			0x0f
+#  define SP_FS_FREQ_44100HZ		0x00
+#  define SP_FS_FREQ_48000HZ		0x02
+#  define SP_FS_FREQ_32000HZ		0x03
+#  define SP_FS_FREQ_88200HZ		0x08
+#  define SP_FS_FREQ_96000HZ		0x0a
+#  define SP_FS_FREQ_176400HZ		0x0c
+#  define SP_FS_FREQ_192000HZ		0x0e
+
+/*
+ * Micellaneous Control Block
+ */
+
+/* CHIP Control Register */
+#define SP_CHIP_CTRL_REG		0xe3
+#define SP_MAN_HDMI5V_DET		BIT(3)
+#define SP_PLLLOCK_CKDT_EN		BIT(2)
+#define SP_ANALOG_CKDT_EN		BIT(1)
+#define SP_DIGITAL_CKDT_EN		BIT(0)
+
+/* Packet Receiving Status Register */
+#define SP_PACKET_RECEIVING_STATUS_REG	0xf3
+#define SP_AVI_RCVD			BIT(5)
+#define SP_VSI_RCVD			BIT(1)
+
+/***************************************************************/
+/* Register definition of device address 0x80                  */
+/***************************************************************/
+
+/* HDCP BCAPS Shadow Register */
+#define SP_HDCP_BCAPS_SHADOW_REG	0x2a
+#define SP_BCAPS_REPEATER		BIT(5)
+
+/* HDCP Status Register */
+#define SP_RX_HDCP_STATUS_REG		0x3f
+#define SP_AUTH_EN			BIT(4)
+
+/*
+ * InfoFrame and Control Packet Registers
+ */
+
+/* AVI InfoFrame packet checksum */
+#define SP_AVI_INFOFRAME_CHECKSUM	0xa3
+
+/* AVI InfoFrame Registers */
+#define SP_AVI_INFOFRAME_DATA_BASE	0xa4
+
+#define SP_AVI_COLOR_F_MASK		0x60
+#define SP_AVI_COLOR_F_SHIFT		5
+
+/* Audio InfoFrame Registers */
+#define SP_AUD_INFOFRAME_DATA_BASE	0xc4
+#define SP_AUD_INFOFRAME_LAYOUT_MASK	0x0f
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet type code */
+#define SP_MPEG_VS_INFOFRAME_TYPE_REG	0xe0
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet length */
+#define SP_MPEG_VS_INFOFRAME_LEN_REG	0xe2
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet version number */
+#define SP_MPEG_VS_INFOFRAME_VER_REG	0xe1
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet content */
+#define SP_MPEG_VS_INFOFRAME_DATA_BASE	0xe4
+
+/* General Control Packet Register */
+#define SP_GENERAL_CTRL_PACKET_REG	0x9f
+#define SP_CLEAR_AVMUTE			BIT(4)
+#define SP_SET_AVMUTE			BIT(0)
+
+/***************************************************************/
+/* Register definition of device address 0x70                  */
+/***************************************************************/
+
+/* HDCP Status Register */
+#define SP_TX_HDCP_STATUS_REG		0x00
+#define SP_AUTH_FAIL			BIT(5)
+#define SP_AUTHEN_PASS			BIT(1)
+
+/* HDCP Control Register 0 */
+#define SP_HDCP_CTRL0_REG		0x01
+#define SP_RX_REPEATER			BIT(6)
+#define SP_RE_AUTH			BIT(5)
+#define SP_SW_AUTH_OK			BIT(4)
+#define SP_HARD_AUTH_EN			BIT(3)
+#define SP_HDCP_ENC_EN			BIT(2)
+#define SP_BKSV_SRM_PASS		BIT(1)
+#define SP_KSVLIST_VLD			BIT(0)
+/* HDCP Function Enabled */
+#define SP_HDCP_FUNCTION_ENABLED	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+/* HDCP Receiver BSTATUS Register 0 */
+#define	SP_HDCP_RX_BSTATUS0_REG		0x1b
+/* HDCP Receiver BSTATUS Register 1 */
+#define	SP_HDCP_RX_BSTATUS1_REG		0x1c
+
+/* HDCP Embedded "Blue Screen" Content Registers */
+#define SP_HDCP_VID0_BLUE_SCREEN_REG	0x2c
+#define SP_HDCP_VID1_BLUE_SCREEN_REG	0x2d
+#define SP_HDCP_VID2_BLUE_SCREEN_REG	0x2e
+
+/* HDCP Wait R0 Timing Register */
+#define SP_HDCP_WAIT_R0_TIME_REG	0x40
+
+/* HDCP Link Integrity Check Timer Register */
+#define SP_HDCP_LINK_CHECK_TIMER_REG	0x41
+
+/* HDCP Repeater Ready Wait Timer Register */
+#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG	0x42
+
+/* HDCP Auto Timer Register */
+#define SP_HDCP_AUTO_TIMER_REG		0x51
+
+/* HDCP Key Status Register */
+#define SP_HDCP_KEY_STATUS_REG		0x5e
+
+/* HDCP Key Command Register */
+#define SP_HDCP_KEY_COMMAND_REG		0x5f
+#define SP_DISABLE_SYNC_HDCP		BIT(2)
+
+/* OTP Memory Key Protection Registers */
+#define SP_OTP_KEY_PROTECT1_REG		0x60
+#define SP_OTP_KEY_PROTECT2_REG		0x61
+#define SP_OTP_KEY_PROTECT3_REG		0x62
+#define SP_OTP_PSW1			0xa2
+#define SP_OTP_PSW2			0x7e
+#define SP_OTP_PSW3			0xc6
+
+/* DP System Control Registers */
+#define SP_DP_SYSTEM_CTRL_BASE		(0x80 - 1)
+/* Bits for DP System Control Register 2 */
+#define SP_CHA_STA			BIT(2)
+/* Bits for DP System Control Register 3 */
+#define SP_HPD_STATUS			BIT(6)
+#define SP_STRM_VALID			BIT(2)
+/* Bits for DP System Control Register 4 */
+#define SP_ENHANCED_MODE		BIT(3)
+
+/* DP Video Control Register */
+#define SP_DP_VIDEO_CTRL_REG		0x84
+#define SP_COLOR_F_MASK			0x06
+#define SP_COLOR_F_SHIFT		1
+#define SP_BPC_MASK			0xe0
+#define SP_BPC_SHIFT			5
+#  define SP_BPC_6BITS			0x00
+#  define SP_BPC_8BITS			0x01
+#  define SP_BPC_10BITS			0x02
+#  define SP_BPC_12BITS			0x03
+
+/* DP Audio Control Register */
+#define SP_DP_AUDIO_CTRL_REG		0x87
+#define SP_AUD_EN			BIT(0)
+
+/* 10us Pulse Generate Timer Registers */
+#define SP_I2C_GEN_10US_TIMER0_REG	0x88
+#define SP_I2C_GEN_10US_TIMER1_REG	0x89
+
+/* Packet Send Control Register */
+#define SP_PACKET_SEND_CTRL_REG		0x90
+#define SP_AUD_IF_UP			BIT(7)
+#define SP_AVI_IF_UD			BIT(6)
+#define SP_MPEG_IF_UD			BIT(5)
+#define SP_SPD_IF_UD			BIT(4)
+#define SP_AUD_IF_EN			BIT(3)
+#define SP_AVI_IF_EN			BIT(2)
+#define SP_MPEG_IF_EN			BIT(1)
+#define SP_SPD_IF_EN			BIT(0)
+
+/* DP HDCP Control Register */
+#define SP_DP_HDCP_CTRL_REG		0x92
+#define SP_AUTO_EN			BIT(7)
+#define SP_AUTO_START			BIT(5)
+#define SP_LINK_POLLING			BIT(1)
+
+/* DP Main Link Bandwidth Setting Register */
+#define SP_DP_MAIN_LINK_BW_SET_REG	0xa0
+#define SP_LINK_BW_SET_MASK		0x1f
+#define SP_INITIAL_SLIM_M_AUD_SEL	BIT(5)
+
+/* DP Training Pattern Set Register */
+#define SP_DP_TRAINING_PATTERN_SET_REG	0xa2
+
+/* DP Lane 0 Link Training Control Register */
+#define SP_DP_LANE0_LT_CTRL_REG		0xa3
+#define SP_TX_SW_SET_MASK		0x1b
+#define SP_MAX_PRE_REACH		BIT(5)
+#define SP_MAX_DRIVE_REACH		BIT(4)
+#define SP_PRE_EMP_LEVEL1		BIT(3)
+#define SP_DRVIE_CURRENT_LEVEL1		BIT(0)
+
+/* DP Link Training Control Register */
+#define SP_DP_LT_CTRL_REG		0xa8
+#define SP_LT_ERROR_TYPE_MASK		0x70
+#  define SP_LT_NO_ERROR		0x00
+#  define SP_LT_AUX_WRITE_ERROR		0x01
+#  define SP_LT_MAX_DRIVE_REACHED	0x02
+#  define SP_LT_WRONG_LANE_COUNT_SET	0x03
+#  define SP_LT_LOOP_SAME_5_TIME	0x04
+#  define SP_LT_CR_FAIL_IN_EQ		0x05
+#  define SP_LT_EQ_LOOP_5_TIME		0x06
+#define SP_LT_EN			BIT(0)
+
+/* DP CEP Training Control Registers */
+#define SP_DP_CEP_TRAINING_CTRL0_REG	0xa9
+#define SP_DP_CEP_TRAINING_CTRL1_REG	0xaa
+
+/* DP Debug Register 1 */
+#define SP_DP_DEBUG1_REG		0xb0
+#define SP_DEBUG_PLL_LOCK		BIT(4)
+#define SP_POLLING_EN			BIT(1)
+
+/* DP Polling Control Register */
+#define SP_DP_POLLING_CTRL_REG		0xb4
+#define SP_AUTO_POLLING_DISABLE		BIT(0)
+
+/* DP Link Debug Control Register */
+#define SP_DP_LINK_DEBUG_CTRL_REG	0xb8
+#define SP_M_VID_DEBUG			BIT(5)
+#define SP_NEW_PRBS7			BIT(4)
+#define SP_INSERT_ER			BIT(1)
+#define SP_PRBS31_EN			BIT(0)
+
+/* AUX Misc control Register */
+#define SP_AUX_MISC_CTRL_REG		0xbf
+
+/* DP PLL control Register */
+#define SP_DP_PLL_CTRL_REG		0xc7
+#define SP_PLL_RST			BIT(6)
+
+/* DP Analog Power Down Register */
+#define SP_DP_ANALOG_POWER_DOWN_REG	0xc8
+#define SP_CH0_PD			BIT(0)
+
+/* DP Misc Control Register */
+#define SP_DP_MISC_CTRL_REG		0xcd
+#define SP_EQ_TRAINING_LOOP		BIT(6)
+
+/* DP Extra I2C Device Address Register */
+#define SP_DP_EXTRA_I2C_DEV_ADDR_REG	0xce
+#define SP_I2C_STRETCH_DISABLE		BIT(7)
+
+#define SP_I2C_EXTRA_ADDR		0x50
+
+/* DP DownSpreading Control Register 1 */
+#define SP_DP_DOWNSPREADING_CTRL1_REG	0xd0
+#define SP_TX_SSC_DISABLE		0xc0
+#define SP_TX_SSC_DOWNSPREADING		BIT(6)
+
+/* DP M Value Calculation Control Register */
+#define SP_DP_M_CALCULATION_CTRL_REG	0xd9
+#define SP_M_GEN_CLK_SEL		BIT(0)
+
+/* AUX Channel Access Status Register */
+#define SP_AUX_CH_STATUS_REG		0xe0
+#define SP_AUX_STATUS			0x0f
+
+/* AUX Channel DEFER Control Register */
+#define SP_AUX_DEFER_CTRL_REG		0xe2
+#define SP_DEFER_CTRL_EN		BIT(7)
+
+/* DP Buffer Data Count Register */
+#define SP_BUF_DATA_COUNT_REG		0xe4
+#define SP_BUF_DATA_COUNT_MASK		0x1f
+#define SP_BUF_CLR			BIT(7)
+
+/* DP AUX Channel Control Register 1 */
+#define SP_DP_AUX_CH_CTRL1_REG		0xe5
+#define SP_AUX_TX_COMM_MASK		0x0f
+#define SP_AUX_LENGTH_MASK		0xf0
+#define SP_AUX_LENGTH_SHIFT		4
+
+/* DP AUX CH Address Register 0 */
+#define SP_AUX_ADDR_7_0_REG		0xe6
+
+/* DP AUX CH Address Register 1 */
+#define SP_AUX_ADDR_15_8_REG		0xe7
+
+/* DP AUX CH Address Register 2 */
+#define SP_AUX_ADDR_19_16_REG		0xe8
+#define SP_AUX_ADDR_19_16_MASK		0x0f
+
+/* DP AUX Channel Control Register 2 */
+#define SP_DP_AUX_CH_CTRL2_REG		0xe9
+#define SP_AUX_SEL_RXCM			BIT(6)
+#define SP_AUX_CHSEL			BIT(3)
+#define SP_AUX_PN_INV			BIT(2)
+#define SP_ADDR_ONLY			BIT(1)
+#define SP_AUX_EN			BIT(0)
+
+/* DP Video Stream Control InfoFrame Register */
+#define SP_DP_3D_VSC_CTRL_REG		0xea
+#define SP_INFO_FRAME_VSC_EN		BIT(0)
+
+/* DP Video Stream Data Byte 1 Register */
+#define SP_DP_VSC_DB1_REG		0xeb
+
+/* DP AUX Channel Control Register 3 */
+#define SP_DP_AUX_CH_CTRL3_REG		0xec
+#define SP_WAIT_COUNTER_7_0_MASK	0xff
+
+/* DP AUX Channel Control Register 4 */
+#define SP_DP_AUX_CH_CTRL4_REG		0xed
+
+/* DP AUX Buffer Data Registers */
+#define SP_DP_BUF_DATA0_REG		0xf0
+
+/***************************************************************/
+/* Register definition of device address 0x72                  */
+/***************************************************************/
+
+/*
+ * Core Register Definitions
+ */
+
+/* Device ID Low Byte Register */
+#define SP_DEVICE_IDL_REG		0x02
+
+/* Device ID High Byte Register */
+#define SP_DEVICE_IDH_REG		0x03
+
+/* Power Down Control Register */
+#define SP_POWERDOWN_CTRL_REG		0x05
+#define SP_REGISTER_PD			BIT(7)
+#define SP_HDCP_PD			BIT(5)
+#define SP_AUDIO_PD			BIT(4)
+#define SP_VIDEO_PD			BIT(3)
+#define SP_LINK_PD			BIT(2)
+#define SP_TOTAL_PD			BIT(1)
+
+/* Reset Control Register 1 */
+#define SP_RESET_CTRL1_REG		0x06
+#define SP_MISC_RST			BIT(7)
+#define SP_VIDCAP_RST			BIT(6)
+#define SP_VIDFIF_RST			BIT(5)
+#define SP_AUDFIF_RST			BIT(4)
+#define SP_AUDCAP_RST			BIT(3)
+#define SP_HDCP_RST			BIT(2)
+#define SP_SW_RST			BIT(1)
+#define SP_HW_RST			BIT(0)
+
+/* Reset Control Register 2 */
+#define SP_RESET_CTRL2_REG		0x07
+#define SP_AUX_RST			BIT(2)
+#define SP_SERDES_FIFO_RST		BIT(1)
+#define SP_I2C_REG_RST			BIT(0)
+
+/* Video Control Register 1 */
+#define SP_VID_CTRL1_REG		0x08
+#define SP_VIDEO_EN			BIT(7)
+#define SP_VIDEO_MUTE			BIT(2)
+#define SP_DE_GEN			BIT(1)
+#define SP_DEMUX			BIT(0)
+
+/* Video Control Register 2 */
+#define SP_VID_CTRL2_REG		0x09
+#define SP_IN_COLOR_F_MASK		0x03
+#define SP_IN_YC_BIT_SEL		BIT(2)
+#define SP_IN_BPC_MASK			0x70
+#define SP_IN_BPC_SHIFT			4
+#  define SP_IN_BPC_12BIT		0x03
+#  define SP_IN_BPC_10BIT		0x02
+#  define SP_IN_BPC_8BIT		0x01
+#  define SP_IN_BPC_6BIT		0x00
+#define SP_IN_D_RANGE			BIT(7)
+
+/* Video Control Register 3 */
+#define SP_VID_CTRL3_REG		0x0a
+#define SP_HPD_OUT			BIT(6)
+
+/* Video Control Register 5 */
+#define SP_VID_CTRL5_REG		0x0c
+#define SP_CSC_STD_SEL			BIT(7)
+#define SP_XVYCC_RNG_LMT		BIT(6)
+#define SP_RANGE_Y2R			BIT(5)
+#define SP_CSPACE_Y2R			BIT(4)
+#define SP_RGB_RNG_LMT			BIT(3)
+#define SP_Y_RNG_LMT			BIT(2)
+#define SP_RANGE_R2Y			BIT(1)
+#define SP_CSPACE_R2Y			BIT(0)
+
+/* Video Control Register 6 */
+#define SP_VID_CTRL6_REG		0x0d
+#define SP_TEST_PATTERN_EN		BIT(7)
+#define SP_VIDEO_PROCESS_EN		BIT(6)
+#define SP_VID_US_MODE			BIT(3)
+#define SP_VID_DS_MODE			BIT(2)
+#define SP_UP_SAMPLE			BIT(1)
+#define SP_DOWN_SAMPLE			BIT(0)
+
+/* Video Control Register 8 */
+#define SP_VID_CTRL8_REG		0x0f
+#define SP_VID_VRES_TH			BIT(0)
+
+/* Total Line Status Low Byte Register */
+#define SP_TOTAL_LINE_STAL_REG		0x24
+
+/* Total Line Status High Byte Register */
+#define SP_TOTAL_LINE_STAH_REG		0x25
+
+/* Active Line Status Low Byte Register */
+#define SP_ACT_LINE_STAL_REG		0x26
+
+/* Active Line Status High Byte Register */
+#define SP_ACT_LINE_STAH_REG		0x27
+
+/* Vertical Front Porch Status Register */
+#define SP_V_F_PORCH_STA_REG		0x28
+
+/* Vertical SYNC Width Status Register */
+#define SP_V_SYNC_STA_REG		0x29
+
+/* Vertical Back Porch Status Register */
+#define SP_V_B_PORCH_STA_REG		0x2a
+
+/* Total Pixel Status Low Byte Register */
+#define SP_TOTAL_PIXEL_STAL_REG		0x2b
+
+/* Total Pixel Status High Byte Register */
+#define SP_TOTAL_PIXEL_STAH_REG		0x2c
+
+/* Active Pixel Status Low Byte Register */
+#define SP_ACT_PIXEL_STAL_REG		0x2d
+
+/* Active Pixel Status High Byte Register */
+#define SP_ACT_PIXEL_STAH_REG		0x2e
+
+/* Horizontal Front Porch Status Low Byte Register */
+#define SP_H_F_PORCH_STAL_REG		0x2f
+
+/* Horizontal Front Porch Statys High Byte Register */
+#define SP_H_F_PORCH_STAH_REG		0x30
+
+/* Horizontal SYNC Width Status Low Byte Register */
+#define SP_H_SYNC_STAL_REG		0x31
+
+/* Horizontal SYNC Width Status High Byte Register */
+#define SP_H_SYNC_STAH_REG		0x32
+
+/* Horizontal Back Porch Status Low Byte Register */
+#define SP_H_B_PORCH_STAL_REG		0x33
+
+/* Horizontal Back Porch Status High Byte Register */
+#define SP_H_B_PORCH_STAH_REG		0x34
+
+/* InfoFrame AVI Packet Type Register */
+#define SP_INFOFRAME_AVI_TYPE_REG	0x70
+
+/* InfoFrame AVI Packet Version Register */
+#define SP_INFOFRAME_AVI_VER_REG	0x71
+
+/* InfoFrame AVI Packet Length Register */
+#define SP_INFOFRAME_AVI_LEN_REG	0x72
+
+/* InfoFrame AVI Packet DB0 Register */
+#define SP_INFOFRAME_AVI_DB0_REG	0x73
+
+/* Bit Control Specific Register */
+#define SP_BIT_CTRL_SPECIFIC_REG	0x80
+#define SP_BIT_CTRL_SELECT_SHIFT	1
+#define SP_ENABLE_BIT_CTRL		BIT(0)
+
+/* InfoFrame Audio Packet Type Register */
+#define SP_INFOFRAME_AUD_TYPE_REG	0x83
+
+/* InfoFrame Audio Packet Version Register */
+#define SP_INFOFRAME_AUD_VER_REG	0x84
+
+/* InfoFrame Audio Packet Length Register */
+#define SP_INFOFRAME_AUD_LEN_REG	0x85
+
+/* InfoFrame Audio Packet DB0 Register */
+#define SP_INFOFRAME_AUD_DB0_REG	0x86
+
+/* InfoFrame MPEG Packet Type Register */
+#define SP_INFOFRAME_MPEG_TYPE_REG	0xb0
+
+/* InfoFrame MPEG Packet Version Register */
+#define SP_INFOFRAME_MPEG_VER_REG	0xb1
+
+/* InfoFrame MPEG Packet Length Register */
+#define SP_INFOFRAME_MPEG_LEN_REG	0xb2
+
+/* InfoFrame MPEG Packet DB0 Register */
+#define SP_INFOFRAME_MPEG_DB0_REG	0xb3
+
+/* Audio Channel Status Registers */
+#define SP_AUD_CH_STATUS_BASE		0xd0
+
+/* Audio Channel Num Register 5 */
+#define SP_I2S_CHANNEL_NUM_MASK		0xe0
+#  define SP_I2S_CH_NUM_1		(0x00 << 5)
+#  define SP_I2S_CH_NUM_2		(0x01 << 5)
+#  define SP_I2S_CH_NUM_3		(0x02 << 5)
+#  define SP_I2S_CH_NUM_4		(0x03 << 5)
+#  define SP_I2S_CH_NUM_5		(0x04 << 5)
+#  define SP_I2S_CH_NUM_6		(0x05 << 5)
+#  define SP_I2S_CH_NUM_7		(0x06 << 5)
+#  define SP_I2S_CH_NUM_8		(0x07 << 5)
+#define SP_EXT_VUCP			BIT(2)
+#define SP_VBIT				BIT(1)
+#define SP_AUDIO_LAYOUT			BIT(0)
+
+/* Analog Debug Register 2 */
+#define SP_ANALOG_DEBUG2_REG		0xdd
+#define SP_FORCE_SW_OFF_BYPASS		0x20
+#define SP_XTAL_FRQ			0x1c
+#  define SP_XTAL_FRQ_19M2		(0x00 << 2)
+#  define SP_XTAL_FRQ_24M		(0x01 << 2)
+#  define SP_XTAL_FRQ_25M		(0x02 << 2)
+#  define SP_XTAL_FRQ_26M		(0x03 << 2)
+#  define SP_XTAL_FRQ_27M		(0x04 << 2)
+#  define SP_XTAL_FRQ_38M4		(0x05 << 2)
+#  define SP_XTAL_FRQ_52M		(0x06 << 2)
+#define SP_POWERON_TIME_1P5MS		0x03
+
+/* Analog Control 0 Register */
+#define SP_ANALOG_CTRL0_REG		0xe1
+
+/* Common Interrupt Status Register 1 */
+#define SP_COMMON_INT_STATUS_BASE	(0xf1 - 1)
+#define SP_PLL_LOCK_CHG			0x40
+
+/* Common Interrupt Status Register 2 */
+#define SP_COMMON_INT_STATUS2		0xf2
+#define SP_HDCP_AUTH_CHG		BIT(1)
+#define SP_HDCP_AUTH_DONE		BIT(0)
+
+#define SP_HDCP_LINK_CHECK_FAIL		BIT(0)
+
+#define SP_HPD_IRQ			BIT(6)
+#define SP_HPD_ESYNC_ERR		BIT(4)
+#define SP_HPD_CHG			BIT(2)
+#define SP_HPD_LOST			BIT(1)
+#define SP_HPD_PLUG			BIT(0)
+
+/* DP Interrupt Status Register */
+#define SP_DP_INT_STATUS_REG		0xf7
+#define SP_TRAINING_FINISH		BIT(5)
+#define SP_POLLING_ERR			BIT(4)
+
+/* Common Interrupt Mask Register */
+#define SP_COMMON_INT_MASK_BASE		(0xf8 - 1)
+
+/* Interrupt Control Register */
+#define SP_INT_CTRL_REG			0xff
+
+/***************************************************************/
+/* Register definition of device address 0x7a                  */
+/***************************************************************/
+
+/* DP TX Link Training Control Register */
+#define SP_DP_TX_LT_CTRL0_REG		0x30
+
+/* PD 1.2 Lint Training 80bit Pattern Register */
+#define SP_DP_LT_80BIT_PATTERN0_REG	0x80
+#define SP_DP_LT_80BIT_PATTERN_REG_NUM	10
+
+/* Audio Interface Control Register 0 */
+#define SP_AUD_INTERFACE_CTRL0_REG	0x5f
+#define SP_AUD_INTERFACE_DISABLE	0x80
+
+/* Audio Interface Control Register 2 */
+#define SP_AUD_INTERFACE_CTRL2_REG	0x60
+#define SP_M_AUD_ADJUST_ST		0x04
+
+/* Audio Interface Control Register 3 */
+#define SP_AUD_INTERFACE_CTRL3_REG	0x62
+
+/* Audio Interface Control Register 4 */
+#define SP_AUD_INTERFACE_CTRL4_REG	0x67
+
+/* Audio Interface Control Register 5 */
+#define SP_AUD_INTERFACE_CTRL5_REG	0x68
+
+/* Audio Interface Control Register 6 */
+#define SP_AUD_INTERFACE_CTRL6_REG	0x69
+
+/* Firmware Version Register */
+#define SP_FW_VER_REG			0xb7
+
+#endif
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux