Hello,
On Sat, Dec 26, 2015 at 12:32:25AM +0100, Pali Rohár wrote:
> Driver for omap3 with documentation is there since v4.4-rc1.
>
> Signed-off-by: Pali Rohár <pali.rohar@xxxxxxxxx>
> ---
> arch/arm/boot/dts/omap34xx.dtsi | 5 +++++
> arch/arm/boot/dts/omap36xx.dtsi | 5 +++++
> 2 files changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
> index 4f6b2d5..c3f488f 100644
> --- a/arch/arm/boot/dts/omap34xx.dtsi
> +++ b/arch/arm/boot/dts/omap34xx.dtsi
> @@ -54,6 +54,11 @@
> #size-cells = <0>;
> };
> };
> +
> + bandgap {
> + reg = <0x48002524 0x4>;
> + compatible = "ti,omap34xx-bandgap";
> + };
> };
> };
>
> diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
> index 86253de..00f98c1 100644
> --- a/arch/arm/boot/dts/omap36xx.dtsi
> +++ b/arch/arm/boot/dts/omap36xx.dtsi
> @@ -86,6 +86,11 @@
> #size-cells = <0>;
> };
> };
> +
> + bandgap {
> + reg = <0x48002524 0x4>;
> + compatible = "ti,omap36xx-bandgap";
Can you please already add on both cases
#thermal-sensor-cells = <0>;
?
This way we can already use them to define thermal zones. Of course,
that alone won't add the thermal zones. A separated patch would be
needed to add the thermal zone for OMAP3.
> + };
> };
> };
>
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
