On 28/12/15 08:09, Biao Huang wrote:
Signed-off-by: Biao Huang <biao.huang@xxxxxxxxxxxx>
---
.../devicetree/bindings/pinctrl/pinctrl-mt65xx.txt | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
Reviewed-by: Mathias Brugger <matthias.bgg@xxxxxxxxx>
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
index 0480bc3..9ffb0b2 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt
@@ -4,10 +4,11 @@ The Mediatek's Pin controller is used to control SoC pins.
Required properties:
- compatible: value should be one of the following.
- (a) "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
- (b) "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
- (c) "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl.
- (d) "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
+ "mediatek,mt2701-pinctrl", compatible with mt2701 pinctrl.
+ "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl.
+ "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
+ "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
+ "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
- pins-are-numbered: Specify the subnodes are using numbered pinmux to
specify pins.
- gpio-controller : Marks the device node as a gpio controller.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
