Am Mittwoch, 30. Dezember 2015, 17:07:54 schrieb Romain Perier: > Hi all, > > I agree with Sjoerd, that's more useful to keep these LEDs in sync > with the default vendor behaviour than put their default state to off > and ask the user to manipulate them explicitly... in the worst case, > he can still change the default state from sysfs... > > 2015-12-30 16:53 GMT+01:00 Heiko Stübner <heiko@xxxxxxxxx>: > >> > even a oneliner is generally preferred, compared to no commit message > >> > at all > >> > ;-) > > Well, lack of inspiration :P > No, just kidding, I agree. > > >> > > Signed-off-by: Romain Perier <romain.perier@xxxxxxxxx> > >> > > --- > >> > > > >> > > arch/arm/boot/dts/rk3288-rock2-square.dts | 17 +++++++++++++++++ > >> > > 1 file changed, 17 insertions(+) > >> > > > >> > > diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts > >> > > b/arch/arm/boot/dts/rk3288-rock2-square.dts index c5453a0..a33020f > >> > > 100644 > >> > > --- a/arch/arm/boot/dts/rk3288-rock2-square.dts > >> > > +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts > >> > > @@ -56,6 +56,23 @@ > >> > > > >> > > pinctrl-0 = <&ir_int>; > >> > > > >> > > }; > >> > > > >> > > + gpio-leds { > >> > > + compatible = "gpio-leds"; > >> > > + > >> > > + heartbeat { > >> > > + gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; > >> > > + label = "rock2:green:heartbeat"; > >> > > + linux,default-trigger = "heartbeat"; > >> > > + }; > >> > > + > >> > > + mmc { > >> > > + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; > >> > > + label = "rock2:blue:mmc"; > >> > > + linux,default-trigger = "mmc0"; > >> > > + }; > >> > > >> > the rock2 core schematics seem to not list these leds at all > >> > (especially when > >> > looking at the gpio-side). But looking at the schematics my guess > >> > would be > >> > led_state1 and led_state2, so the naming should reflect that > >> > (rock2:green:state1 ...). > > I used the schematic and the vendor devicetree to retrieve these > informations. > > Anybody opposed to me adding the following commit message? > > > > ---- > > Describe the two user-controllable LEDs on Rock2-square boards. > > The default-triggers mimic the behaviour of the vendor-kernel to > > keep functionalities in sync. > > ---- > > +1 > Please do. > > Do you want a v2 patch ? (the label of these leds is wrong) yep, bringing everything together makes sense :-) Heiko -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html