Re: [RESEND v4 3/6] remoteproc: Supply controller driver for ST's Remote Processors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Nov 24, 2015 at 5:14 AM, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> Signed-off-by: Ludovic Barre <ludovic.barre@xxxxxx>
> Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> ---

Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>

Regards,
Bjorn

>  drivers/remoteproc/Kconfig         |   9 ++
>  drivers/remoteproc/Makefile        |   1 +
>  drivers/remoteproc/st_remoteproc.c | 297 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 307 insertions(+)
>  create mode 100644 drivers/remoteproc/st_remoteproc.c
>
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index 28c711f..72e97d7 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -77,4 +77,13 @@ config DA8XX_REMOTEPROC
>           It's safe to say n here if you're not interested in multimedia
>           offloading.
>
> +config ST_REMOTEPROC
> +       tristate "ST remoteproc support"
> +       depends on ARCH_STI
> +       select REMOTEPROC
> +       help
> +         Say y here to support ST's adjunct processors via the remote
> +         processor framework.
> +         This can be either built-in or a loadable module.
> +
>  endmenu
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index 81b04d1..279cb2e 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_OMAP_REMOTEPROC)         += omap_remoteproc.o
>  obj-$(CONFIG_STE_MODEM_RPROC)          += ste_modem_rproc.o
>  obj-$(CONFIG_WKUP_M3_RPROC)            += wkup_m3_rproc.o
>  obj-$(CONFIG_DA8XX_REMOTEPROC)         += da8xx_remoteproc.o
> +obj-$(CONFIG_ST_REMOTEPROC)            += st_remoteproc.o
> diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c
> new file mode 100644
> index 0000000..6bb04d4
> --- /dev/null
> +++ b/drivers/remoteproc/st_remoteproc.c
> @@ -0,0 +1,297 @@
> +/*
> + * ST's Remote Processor Control Driver
> + *
> + * Copyright (C) 2015 STMicroelectronics - All Rights Reserved
> + *
> + * Author: Ludovic Barre <ludovic.barre@xxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_reserved_mem.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/remoteproc.h>
> +#include <linux/reset.h>
> +
> +struct st_rproc_config {
> +       bool                    sw_reset;
> +       bool                    pwr_reset;
> +       unsigned long           bootaddr_mask;
> +};
> +
> +struct st_rproc {
> +       struct st_rproc_config  *config;
> +       struct reset_control    *sw_reset;
> +       struct reset_control    *pwr_reset;
> +       struct clk              *clk;
> +       u32                     clk_rate;
> +       struct regmap           *boot_base;
> +       u32                     boot_offset;
> +};
> +
> +static int st_rproc_start(struct rproc *rproc)
> +{
> +       struct st_rproc *ddata = rproc->priv;
> +       int err;
> +
> +       regmap_update_bits(ddata->boot_base, ddata->boot_offset,
> +                          ddata->config->bootaddr_mask, rproc->bootaddr);
> +
> +       err = clk_enable(ddata->clk);
> +       if (err) {
> +               dev_err(&rproc->dev, "Failed to enable clock\n");
> +               return err;
> +       }
> +
> +       if (ddata->config->sw_reset) {
> +               err = reset_control_deassert(ddata->sw_reset);
> +               if (err) {
> +                       dev_err(&rproc->dev, "Failed to deassert S/W Reset\n");
> +                       goto sw_reset_fail;
> +               }
> +       }
> +
> +       if (ddata->config->pwr_reset) {
> +               err = reset_control_deassert(ddata->pwr_reset);
> +               if (err) {
> +                       dev_err(&rproc->dev, "Failed to deassert Power Reset\n");
> +                       goto pwr_reset_fail;
> +               }
> +       }
> +
> +       dev_info(&rproc->dev, "Started from 0x%x\n", rproc->bootaddr);
> +
> +       return 0;
> +
> +
> +pwr_reset_fail:
> +       if (ddata->config->pwr_reset)
> +               reset_control_assert(ddata->sw_reset);
> +sw_reset_fail:
> +       clk_disable(ddata->clk);
> +
> +       return err;
> +}
> +
> +static int st_rproc_stop(struct rproc *rproc)
> +{
> +       struct st_rproc *ddata = rproc->priv;
> +       int sw_err = 0, pwr_err = 0;
> +
> +       if (ddata->config->sw_reset) {
> +               sw_err = reset_control_assert(ddata->sw_reset);
> +               if (sw_err)
> +                       dev_err(&rproc->dev, "Failed to assert S/W Reset\n");
> +       }
> +
> +       if (ddata->config->pwr_reset) {
> +               pwr_err = reset_control_assert(ddata->pwr_reset);
> +               if (pwr_err)
> +                       dev_err(&rproc->dev, "Failed to assert Power Reset\n");
> +       }
> +
> +       clk_disable(ddata->clk);
> +
> +       return sw_err ?: pwr_err;
> +}
> +
> +static struct rproc_ops st_rproc_ops = {
> +       .start          = st_rproc_start,
> +       .stop           = st_rproc_stop,
> +};
> +
> +/*
> + * Fetch state of the processor: 0 is off, 1 is on.
> + */
> +static int st_rproc_state(struct platform_device *pdev)
> +{
> +       struct rproc *rproc = platform_get_drvdata(pdev);
> +       struct st_rproc *ddata = rproc->priv;
> +       int reset_sw = 0, reset_pwr = 0;
> +
> +       if (ddata->config->sw_reset)
> +               reset_sw = reset_control_status(ddata->sw_reset);
> +
> +       if (ddata->config->pwr_reset)
> +               reset_pwr = reset_control_status(ddata->pwr_reset);
> +
> +       if (reset_sw < 0 || reset_pwr < 0)
> +               return -EINVAL;
> +
> +       return !reset_sw && !reset_pwr;
> +}
> +
> +static const struct st_rproc_config st40_rproc_cfg = {
> +       .sw_reset = true,
> +       .pwr_reset = true,
> +       .bootaddr_mask = GENMASK(28, 1),
> +};
> +
> +static const struct st_rproc_config st231_rproc_cfg = {
> +       .sw_reset = true,
> +       .pwr_reset = false,
> +       .bootaddr_mask = GENMASK(31, 6),
> +};
> +
> +static const struct of_device_id st_rproc_match[] = {
> +       { .compatible = "st,st40-rproc", .data = &st40_rproc_cfg },
> +       { .compatible = "st,st231-rproc", .data = &st231_rproc_cfg },
> +       {},
> +};
> +MODULE_DEVICE_TABLE(of, st_rproc_match);
> +
> +static int st_rproc_parse_dt(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct rproc *rproc = platform_get_drvdata(pdev);
> +       struct st_rproc *ddata = rproc->priv;
> +       struct device_node *np = dev->of_node;
> +       int err;
> +
> +       if (ddata->config->sw_reset) {
> +               ddata->sw_reset = devm_reset_control_get(dev, "sw_reset");
> +               if (IS_ERR(ddata->sw_reset)) {
> +                       dev_err(dev, "Failed to get S/W Reset\n");
> +                       return PTR_ERR(ddata->sw_reset);
> +               }
> +       }
> +
> +       if (ddata->config->pwr_reset) {
> +               ddata->pwr_reset = devm_reset_control_get(dev, "pwr_reset");
> +               if (IS_ERR(ddata->pwr_reset)) {
> +                       dev_err(dev, "Failed to get Power Reset\n");
> +                       return PTR_ERR(ddata->pwr_reset);
> +               }
> +       }
> +
> +       ddata->clk = devm_clk_get(dev, NULL);
> +       if (IS_ERR(ddata->clk)) {
> +               dev_err(dev, "Failed to get clock\n");
> +               return PTR_ERR(ddata->clk);
> +       }
> +
> +       err = of_property_read_u32(np, "clock-frequency", &ddata->clk_rate);
> +       if (err) {
> +               dev_err(dev, "failed to get clock frequency\n");
> +               return err;
> +       }
> +
> +       ddata->boot_base = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
> +       if (!ddata->boot_base) {
> +               dev_err(dev, "Boot base not found\n");
> +               return -EINVAL;
> +       }
> +
> +       err = of_property_read_u32_index(np, "st,syscfg", 1,
> +                                        &ddata->boot_offset);
> +       if (err) {
> +               dev_err(dev, "Boot offset not found\n");
> +               return -EINVAL;
> +       }
> +
> +       err = of_reserved_mem_device_init(dev);
> +       if (err) {
> +               dev_err(dev, "Failed to obtain shared memory\n");
> +               return err;
> +       }
> +
> +       err = clk_prepare(ddata->clk);
> +       if (err)
> +               dev_err(dev, "failed to get clock\n");
> +
> +       return err;
> +}
> +
> +static int st_rproc_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       const struct of_device_id *match;
> +       struct st_rproc *ddata;
> +       struct device_node *np = dev->of_node;
> +       struct rproc *rproc;
> +       int enabled;
> +       int ret;
> +
> +       match = of_match_device(st_rproc_match, dev);
> +       if (!match || !match->data) {
> +               dev_err(dev, "No device match found\n");
> +               return -ENODEV;
> +       }
> +
> +       rproc = rproc_alloc(dev, np->name, &st_rproc_ops, NULL, sizeof(*ddata));
> +       if (!rproc)
> +               return -ENOMEM;
> +
> +       rproc->has_iommu = false;
> +       ddata = rproc->priv;
> +       ddata->config = (struct st_rproc_config *)match->data;
> +
> +       platform_set_drvdata(pdev, rproc);
> +
> +       ret = st_rproc_parse_dt(pdev);
> +       if (ret)
> +               goto free_rproc;
> +
> +       enabled = st_rproc_state(pdev);
> +       if (enabled < 0)
> +               goto free_rproc;
> +
> +       if (enabled) {
> +               atomic_inc(&rproc->power);
> +               rproc->state = RPROC_RUNNING;
> +       } else {
> +               clk_set_rate(ddata->clk, ddata->clk_rate);
> +       }
> +
> +       ret = rproc_add(rproc);
> +       if (ret)
> +               goto free_rproc;
> +
> +       return 0;
> +
> +free_rproc:
> +       rproc_put(rproc);
> +       return ret;
> +}
> +
> +static int st_rproc_remove(struct platform_device *pdev)
> +{
> +       struct rproc *rproc = platform_get_drvdata(pdev);
> +       struct st_rproc *ddata = rproc->priv;
> +
> +       rproc_del(rproc);
> +
> +       clk_disable_unprepare(ddata->clk);
> +
> +       of_reserved_mem_device_release(&pdev->dev);
> +
> +       rproc_put(rproc);
> +
> +       return 0;
> +}
> +
> +static struct platform_driver st_rproc_driver = {
> +       .probe = st_rproc_probe,
> +       .remove = st_rproc_remove,
> +       .driver = {
> +               .name = "st-rproc",
> +               .of_match_table = of_match_ptr(st_rproc_match),
> +       },
> +};
> +module_platform_driver(st_rproc_driver);
> +
> +MODULE_DESCRIPTION("ST Remote Processor Control Driver");
> +MODULE_AUTHOR("Ludovic Barre <ludovic.barre@xxxxxx>");
> +MODULE_LICENSE("GPL v2");
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux