On 11/05/13 09:13, Kumar Gala wrote:
> On Nov 1, 2013, at 5:08 PM, Stephen Boyd wrote:
>
>> diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
>> new file mode 100644
>> index 0000000..ed4a9c8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
>> @@ -0,0 +1,21 @@
>> +* Krait Processor Sub-system (KPSS) Application Clock Controller (ACC)
>> +
>> +The KPSS ACC provides clock, power domain, and reset control to a Krait CPU.
>> +There is one ACC register region per CPU within the KPSS remaped region as
>> +well as an alias register region that remaps accesses to the ACC associated
>> +with the CPU accessing the region.
>> +
>> +Required Properties:
>> +
>> +- compatible : Shall contain "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2".
>> +- reg: Specifies the base address and size of the banked register region.
>> +- cpu-offset : per-cpu offset used when the device is accessed without the
>> + CPU remapping facilities.
>> + The offset is cpu-offset + (0x10000 * cpu-nr).
>> +
>> +Example:
>> +
>> + clock-controller@2008000 {
>> + compatible = "qcom,kpss-acc-v2";
>> + reg = <0x02008000 0x1000>;
>> + };
>> --
> I don't get the cpu-offset business, shouldn't this just be:
> reg = <0x02008000 0x1000>, <0x02018000 0x1000>, <0x02028000 0x1000>, <0x02038000 0x1000>;
>
(Sorry I forgot to add the cpu-offset to the example.)
Your reg property is one way to do it. I was following the example of
the GIC binding which just specifies the alias region of the GIC's CPU
registers and then has a cpu-offset property to describe how to reach a
specific CPU's region.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
